Class 11 PCB . Physics . Physics Part I . Work Energy and Power

Chapter 5: WORK, ENERGY AND POWER

Ch 5

Physics

Class 11 PCB

Work and Power

Definition of Work

Work is said to be done when a force causes displacement of a body in the direction of the applied force. Mathematically, work done WW is given by the dot product of force F⃗\vec{F} and displacement s⃗\vec{s}:

W=F⃗⋅s⃗=Fscos⁡θW = \vec{F} \cdot \vec{s} = Fs \cos \theta

where θ\theta is the angle between the force and displacement vectors.

Properties of Work

  • Work is a scalar quantity.
  • Work done is positive when \( 0 \leq \theta < \frac{\pi}{2} \).
  • Work done is negative when \( \frac{\pi}{2} < \theta \leq \frac{3\pi}{2} \).
  • Work done is zero when force is perpendicular to displacement (θ=90∘\theta = 90^\circ).
  • SI unit of work is joule (J), where 1 joule = 1 newton meter (N·m).
  • CGS unit of work is erg, where 1 joule = 107 erg.
  • Work done does not depend on the time taken to do the work.

Internal Work or Zero Work

Internal work refers to work done within the body, such as muscle strain, which does not result in displacement. For example, a person standing still carrying a load does zero external work but experiences internal work causing fatigue.

Dimensions of Work

Work has dimensions [ML2T−2][ML^2T^{-2}].

Definition of Power

Power is the rate at which work is done. It measures how quickly work is performed.

Mathematically,

P=Work doneTime taken=WtP = \frac{\text{Work done}}{\text{Time taken}} = \frac{W}{t}

Alternatively, power can be expressed as the dot product of force and velocity:

P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F} \cdot \vec{v} = Fv \cos \theta

where θ\theta is the angle between force and velocity vectors.

Properties of Power

  • Power is a scalar quantity.
  • SI unit of power is watt (W), where 1 watt = 1 joule per second (J/s).
  • Dimensions of power are [ML2T−3][ML^2T^{-3}].
Diagram 1 – CBSE Class 11 PCB Physics WORK, ENERGY AND POWER

Solved Examples

Example 1: Calculating Work Done

A force of 10 N is applied to move a box 5 m along the direction of the force. Calculate the work done.

Solution:

Given: F=10 N,s=5 m,θ=0∘F = 10 \text{ N}, s = 5 \text{ m}, \theta = 0^\circ

Work done, W=Fscos⁡θ=10×5×cos⁡0∘=50 JW = Fs \cos \theta = 10 \times 5 \times \cos 0^\circ = 50 \text{ J}

Example 2: Calculating Power

A machine does 200 J of work in 10 seconds. Find the power of the machine.

Solution:

Given: W=200 J,t=10 sW = 200 \text{ J}, t = 10 \text{ s}

Power, P=Wt=20010=20 WP = \frac{W}{t} = \frac{200}{10} = 20 \text{ W}

Practice Set

  • Level 1: Define work done and state its SI unit.
  • Level 2: A force of 15 N acts at an angle of 60° to the displacement of 4 m. Calculate the work done.
  • Level 3: A motor lifts a 50 kg load to a height of 10 m in 20 seconds. Calculate the power developed by the motor. (Take g=9.8 m/s2g = 9.8 \text{ m/s}^2)

Answer Key

  • Level 1: Work done is the product of force and displacement in the direction of force. SI unit is joule (J).
  • Level 2: Work done W=Fscos⁡θ=15×4×cos⁡60∘=15×4×0.5=30 JW = Fs \cos \theta = 15 \times 4 \times \cos 60^\circ = 15 \times 4 \times 0.5 = 30 \text{ J}.
  • Level 3: Work done W=mgh=50×9.8×10=4900 JW = mgh = 50 \times 9.8 \times 10 = 4900 \text{ J}. Power P=Wt=490020=245 WP = \frac{W}{t} = \frac{4900}{20} = 245 \text{ W}.

Energy and Collision

Definition of Energy

Energy is the capacity of a body to do work. It is a scalar quantity and has the same units and dimensions as work.

Units of Energy

  • 1 calorie = 4.2 joules
  • 1 kilowatt hour (kWh) = 3.6 × 106 joules
  • 1 electron volt (eV) = 1.6 × 10-19 joules

Work-Energy Theorem

The work done by the net force on a body is equal to the change in its kinetic energy:

W=Kf−KiW = K_f - K_i

where KfK_f and KiK_i are the final and initial kinetic energies respectively.

Types of Collisions

When two bodies collide, they exchange energy and momentum. Collisions are classified as:

  • Perfectly Elastic Collision: Total kinetic energy before and after collision remains the same. Example: collisions between atomic particles.
  • Perfectly Inelastic Collision: Kinetic energy is not conserved; bodies stick together after collision. Linear momentum and total energy are conserved.

Key Terms

  • Kinetic Energy (K.E.): Energy due to motion, always positive. K.E.=12mv2K.E. = \frac{1}{2} mv^2
  • Potential Energy (P.E.): Energy due to position, can be positive or negative. P.E.=mghP.E. = mgh
  • Gravitational Potential Energy: Energy due to position relative to Earth’s center.
  • Potential Energy of Spring: Energy stored due to compression or extension of a spring.
  • Internal Energy: Energy due to molecular configuration.
  • Coefficient of Restitution (e): Ratio of relative velocity after collision to that before collision.

Important Formulas

  • K.E.=12mv2K.E. = \frac{1}{2} mv^2
  • P.E.=mghP.E. = mgh
  • Velocity from height: v=2ghv = \sqrt{2gh}
  • Force in spring: F=−kxF = -kx
  • Mass-energy equivalence: E=mc2E = mc^2
  • Coefficient of restitution: e=v2−v1u2−u1e = \frac{v_2 - v_1}{u_2 - u_1}

Elastic Collision in One Dimension

Velocities after collision:

v1=m1−m2m1+m2u1+2m2m1+m2u2v_1 = \frac{m_1 - m_2}{m_1 + m_2} u_1 + \frac{2m_2}{m_1 + m_2} u_2

v2=2m1m1+m2u1+m2−m1m1+m2u2v_2 = \frac{2m_1}{m_1 + m_2} u_1 + \frac{m_2 - m_1}{m_1 + m_2} u_2

Inelastic Collision in One Dimension

If u2=0u_2 = 0, velocity after collision:

v=m1u1m1+m2v = \frac{m_1 u_1}{m_1 + m_2}

Loss in Kinetic Energy

Loss in K.E.=m1m2u122(m1+m2)\text{Loss in K.E.} = \frac{m_1 m_2 u_1^2}{2(m_1 + m_2)}

Solved Examples

Example 1: Calculating Kinetic Energy

A 2 kg object moves with a velocity of 3 m/s. Find its kinetic energy.

Solution:

K.E.=12mv2=12×2×32=9 JK.E. = \frac{1}{2} mv^2 = \frac{1}{2} \times 2 \times 3^2 = 9 \text{ J}

Example 2: Coefficient of Restitution

Two bodies collide with velocities before collision u1=5 m/su_1 = 5 \text{ m/s}, u2=2 m/su_2 = 2 \text{ m/s} and after collision v1=3 m/sv_1 = 3 \text{ m/s}, v2=4 m/sv_2 = 4 \text{ m/s}. Calculate the coefficient of restitution.

Solution:

e=v2−v1u1−u2=4−35−2=13≈0.33e = \frac{v_2 - v_1}{u_1 - u_2} = \frac{4 - 3}{5 - 2} = \frac{1}{3} \approx 0.33

Practice Set

  • Level 1: Define kinetic energy and potential energy.
  • Level 2: Calculate the potential energy of a 10 kg object raised to a height of 5 m. (Take g=9.8 m/s2g = 9.8 \text{ m/s}^2)
  • Level 3: Two bodies of masses 3 kg and 2 kg move towards each other with velocities 4 m/s and 3 m/s respectively. They collide perfectly inelastically. Find their velocity after collision and the loss in kinetic energy.

Answer Key

  • Level 1: Kinetic energy is the energy due to motion of a body. Potential energy is the energy due to position or configuration of a body.
  • Level 2: P.E.=mgh=10×9.8×5=490 JP.E. = mgh = 10 \times 9.8 \times 5 = 490 \text{ J}.
  • Level 3: Velocity after collision v=m1u1+m2u2m1+m2=3×4+2×(−3)3+2=12−65=1.2 m/sv = \frac{m_1 u_1 + m_2 u_2}{m_1 + m_2} = \frac{3 \times 4 + 2 \times (-3)}{3 + 2} = \frac{12 - 6}{5} = 1.2 \text{ m/s} (direction of 3 kg mass).
    Initial K.E. = 12×3×42+12×2×32=24+9=33 J\frac{1}{2} \times 3 \times 4^2 + \frac{1}{2} \times 2 \times 3^2 = 24 + 9 = 33 \text{ J}.
    Final K.E. = 12×5×1.22=3.6 J\frac{1}{2} \times 5 \times 1.2^2 = 3.6 \text{ J}.
    Loss in K.E. = 33 - 3.6 = 29.4 J.

Quick Reference Table

Common Mistakes and Misconceptions

Glossary

Physics — ALL CHAPTERS

1

Units And Measurement

View

2

MOTION IN A STRAIGHT LINE

View

3

MOTION IN A PLANE

View

4

LAWS OF MOTION

View

5

WORK, ENERGY AND POWER

View

6

SYSTEMS OF PARTICLES AND ROTATIONAL MOTION

View

7

GRAVITATION

View

8

Mechanical Properties Of Solids

View

9

Mechanical Properties Of Fluids

View

10

Thermal Properties Of Matter

View

11

Thermodynamics

View

12

Kinetic Theory

View

13

Oscillations

View

14

Waves

View
Work Energy and Power Notes – Class 11 Physics | Prepzy