NEET UG . NEET Chemistry . Chemistry . Hydrocarbons

Chapter 9: Hydrocarbons

Ch 9

NEET Chemistry

NEET UG

"

Introduction

Key Points

  • Hydrocarbons are organic compounds made up only of carbon (C) and hydrogen (H) atoms.

  • Main natural sources: natural gas, petroleum, and coal.

Solved Examples

  • Ex 1: Identify the elements present in hydrocarbons.
    Answer: Carbon and hydrogen only.

Practice Set

  • Q1: What elements constitute hydrocarbons?
    A. C and O
    B. C and H
    C. H and O
    D. C, H, and O

  • Q2: Which of the following is a major source of hydrocarbons?
    A. Water
    B. Natural gas
    C. Air
    D. Salt

  • Q3: Hydrocarbons are primarily found in:
    A. Minerals
    B. Petroleum
    C. Metals
    D. Salts

Answer Key

  • Q1: B - Hydrocarbons contain only carbon and hydrogen atoms.

  • Q2: B - Natural gas is a main source of hydrocarbons.

  • Q3: B - Petroleum is a primary source of hydrocarbons.

Memory Aids

  • Hydrocarbons = C + H only.

  • Sources: Natural gas, Petroleum, Coal (NPC).

Classification

Types of Hydrocarbons

  • Based on carbon-carbon bonds, hydrocarbons are classified into:

  • Saturated: Only single bonds (C–C, C–H).

  • Unsaturated: Contain double (C=C) or triple (C≡C) bonds.

  • Aromatic: Special cyclic compounds with delocalized π electrons.

Subtypes

  • Alkanes: Saturated hydrocarbons with open chains.

  • Cycloalkanes: Saturated hydrocarbons with carbon atoms in rings.

Solved Examples

  • Ex 1: Classify CH4.
    Answer: Saturated alkane (methane, single bonds, open chain).

  • Ex 2: Classify C6H6.
    Answer: Aromatic hydrocarbon (benzene ring with delocalized electrons).

Practice Set

  • Q1: Which hydrocarbon contains only single bonds?
    A. Alkene
    B. Alkyne
    C. Alkane
    D. Aromatic

  • Q2: Cycloalkanes are:
    A. Unsaturated open chain hydrocarbons
    B. Saturated ring hydrocarbons
    C. Aromatic compounds
    D. Unsaturated ring hydrocarbons

  • Q3: Which of the following is an aromatic hydrocarbon?
    A. Ethane
    B. Benzene
    C. Ethene
    D. Cyclohexane

Answer Key

  • Q1: C - Alkanes have only single bonds.

  • Q2: B - Cycloalkanes are saturated hydrocarbons with ring structures.

  • Q3: B - Benzene is a classic aromatic hydrocarbon.

Memory Aids

  • Saturated = single bonds only (alkanes, cycloalkanes).

  • Unsaturated = double/triple bonds (alkenes, alkynes).

  • Aromatic = special cyclic with delocalized π electrons (benzene).

Alkanes

Structure

  • General formula: CnH2n+2 (n = 1, 2, 3...)

  • Carbon atoms are sp3 hybridized, forming tetrahedral geometry

  • All C–C and C–H bonds are sigma (σ) bonds

  • C–C bond length: 1.54 Å; C–H bond length: 1.09 Å

  • Bond angles approximately 109°28'

Isomerism

  • Exhibit chain isomerism

  • First three alkanes (methane, ethane, propane) have no isomers

  • Number of isomers increases with carbon atoms: butane (2), pentane (3), hexane (5), heptane (9), octane (18), decane (75)

Diagram 1 – NEET Chemistry Hydrocarbons

Preparation

By hydrogenation of unsaturated hydrocarbons

  • Alkenes and alkynes react with H2 in presence of Pt, Pd, or Ni catalysts

  • Double/triple bonds convert to single bonds forming alkanes

Diagram 2 – NEET Chemistry Hydrocarbons

Reduction of alkyl halides

  • Alkyl halides (except fluorides) reduced by Zn and dilute HCl to form alkanes

Diagram 3 – NEET Chemistry Hydrocarbons

Wurtz reaction

  • Alkyl halides react with sodium metal in dry ether to form higher alkanes

  • Used to prepare alkanes with even number of carbons

Diagram 4 – NEET Chemistry Hydrocarbons

From carboxylic acids

  • Decarboxylation: Sodium salts of carboxylic acids heated with soda lime produce alkanes with one less carbon atom

Diagram 5 – NEET Chemistry Hydrocarbons

Kolbe’s electrolysis

  • Electrolysis of aqueous sodium or potassium salts of carboxylic acids produces alkanes with even number of carbons

Diagram 6 – NEET Chemistry Hydrocarbons

Physical Properties

  • C1 to C4: gases; C5 to C17: liquids; C18 and above: solids at 298 K

  • Colourless, odourless, insoluble in water, soluble in non-polar solvents

  • Boiling points increase with molecular mass; decrease with branching

  • Alkanes with even number of carbons have higher melting points due to symmetry

Chemical Properties

  • Generally inert to acids, bases, oxidizing and reducing agents

  • Undergo halogenation under UV light or heat

  • Rate of halogenation: F2 > Cl2 > Br2 > I2

  • Rate of hydrogen replacement: 3° > 2° > 1°

  • Fluorination is violent; iodination is slow and reversible, requires oxidizing agents

Diagram 7 – NEET Chemistry Hydrocarbons

Mechanism of Halogenation

  • Chain initiation: UV light splits Cl2 into 2 Cl radicals

  • Chain propagation: Cl radical abstracts H from alkane forming alkyl radical and HCl; alkyl radical reacts with Cl2 to form alkyl halide and Cl radical

  • Chain termination: radicals combine to form stable molecules

Diagram 8 – NEET Chemistry Hydrocarbons

Other Reactions

  • Combustion: Complete (CO2 + H2O), incomplete (C + H2O)

  • Controlled oxidation: partial oxidation to methanol, formaldehyde, acetic acid

  • Isomerisation: n-butane to iso-butane using AlCl3/HCl

  • Aromatisation: n-hexane to benzene using catalysts at high T and P

  • Reaction with steam: methane + steam → CO + H2 (Ni catalyst)

  • Pyrolysis/cracking: breaking large hydrocarbons into smaller ones

Diagram 9 – NEET Chemistry Hydrocarbons

Conformations

Conformational Isomerism

  • Different spatial arrangements due to rotation about C–C single bond

  • Called conformational or rotational isomers

Conformations of Ethane

  • Infinite conformations possible by rotation about C–C bond

  • Eclipsed: hydrogens aligned, least stable

  • Staggered: hydrogens maximally apart, most stable (12.5 kJ/mol more stable than eclipsed)

  • Skew (gauche): intermediate conformations between eclipsed and staggered

Diagram 10 – NEET Chemistry HydrocarbonsDiagram 11 – NEET Chemistry Hydrocarbons

Alkenes Structure

Orbital Overlap

  • Alkene carbon atoms are sp2 hybridised.

  • One sp2 orbital from each carbon overlaps axially to form a sigma (σ) bond.

  • Remaining sp2 orbitals form sigma bonds with hydrogen atoms.

  • Unhybridised p orbitals on each carbon overlap sideways to form a pi (π) bond.

  • Double bond = 1 σ + 1 π bond; π bond restricts rotation.

Solved Examples

Ex 1

  • Explain bonding in ethene: Two sp2 orbitals overlap to form σ bond; p orbitals form π bond.

Practice Set

  • Q1: What type of hybridisation is present in alkene carbons?

    • A. sp

    • B. sp2

    • C. sp3

    • D. dsp2

  • Q2: The pi bond in alkenes is formed by overlap of:

    • A. sp2 orbitals

    • B. p orbitals sideways

    • C. s orbitals

    • D. sp orbitals

  • Q3: Which bond restricts rotation in alkenes?

    • A. Sigma bond

    • B. Pi bond

    • C. Hydrogen bond

    • D. Ionic bond

Answer Key

  • Q1: B - Alkene carbons are sp2 hybridised.

  • Q2: B - Pi bond is formed by sideways overlap of p orbitals.

  • Q3: B - Pi bond restricts rotation around double bond.

Memory Aids

  • Alkene carbons: sp2 hybridised = 3 sigma bonds + 1 pi bond.

  • Pi bond = sideways p orbital overlap, no free rotation.

Alkenes Isomerism

Types of Isomerism

  • Chain isomerism: Different carbon chain arrangements (e.g., 1-pentene and 2-methyl-1-butene).

  • Diagram 12 – NEET Chemistry Hydrocarbons
  • Position isomerism: Double bond at different positions (e.g., 1-butene and 2-butene).

  • Diagram 13 – NEET Chemistry Hydrocarbons
  • Ring chain isomerism: Open chain vs cyclic compounds (e.g., propene and cyclopropane).

  • Diagram 14 – NEET Chemistry Hydrocarbons
  • Geometrical isomerism: Cis (same side) and trans (opposite side) around double bond.

  • Trans isomers are generally more stable due to less steric hindrance.

  • Diagram 15 – NEET Chemistry Hydrocarbons

Solved Examples

Ex 1

  • Identify isomers of butene: 1-butene (double bond at C1), 2-butene (double bond at C2).

Practice Set

  • Q1: Which is an example of chain isomerism?

    • A. 1-butene and 2-butene

    • B. 1-pentene and 2-methyl-1-butene

    • C. Cis-butene and trans-butene

    • D. Propene and cyclopropane

  • Q2: Geometrical isomers differ in:

    • A. Position of double bond

    • B. Arrangement around double bond

    • C. Carbon chain length

    • D. Functional group

  • Q3: Which is more stable?

    • A. Cis-isomer

    • B. Trans-isomer

    • C. Both equal

    • D. Depends on temperature

Answer Key

  • Q1: B - Chain isomerism involves different carbon chains.

  • Q2: B - Geometrical isomers differ in spatial arrangement around double bond.

  • Q3: B - Trans-isomers are more stable due to less steric hindrance.

Memory Aids

  • Chain isomers: different carbon skeletons.

  • Position isomers: double bond shifts.

  • Geometrical isomers: cis (same side), trans (opposite side).

Alkenes Preparation

Methods

  • Partial hydrogenation of alkynes: Using Lindlar's catalyst yields cis-alkenes; Birch reduction (Na/NH3) yields trans-alkenes.

  • Diagram 16 – NEET Chemistry Hydrocarbons
  • Dehydrohalogenation of alkyl halides: β-elimination with alcoholic KOH and heat removes HX to form alkene.

  • Diagram 17 – NEET Chemistry Hydrocarbons
  • From vicinal dihalides: Reduction with Zn removes halogens to form alkene.

  • Dehydration of alcohols: Heating with conc. H2SO4 removes water to form alkene.

  • Diagram 18 – NEET Chemistry Hydrocarbons
  • Saytzeff rule: More substituted alkene formed preferentially.

Solved Examples

Ex 1

  • Partial hydrogenation: HC≡CH + H2 (Lindlar's catalyst) → H2C=CH2 (cis-alkene)

Practice Set

  • Q1: Lindlar's catalyst produces:

    • A. Trans-alkene

    • B. Cis-alkene

    • C. Alkane

    • D. Alkyne

  • Q2: Dehydrohalogenation involves removal of:

    • A. Hydrogen and halogen from same carbon

    • B. Hydrogen and halogen from adjacent carbons

    • C. Two hydrogens

    • D. Two halogens

  • Q3: In dehydration of alcohols, the major product follows:

    • A. Less substituted alkene

    • B. More substituted alkene

    • C. Equal mixture

    • D. No alkene formed

Answer Key

  • Q1: B - Lindlar's catalyst yields cis-alkenes.

  • Q2: B - β-elimination removes H and halogen from adjacent carbons.

  • Q3: B - Saytzeff rule favors more substituted alkene.

Memory Aids

  • Lindlar's catalyst = partial hydrogenation → cis-alkene.

  • Dehydrohalogenation = β-elimination with KOH.

  • Saytzeff rule = more substituted alkene major product.

Alkenes Physical Properties

Key Points

  • First 3 alkenes are gases; next 14 are liquids; higher are solids.

  • All alkenes are colourless and odourless except ethene (faint sweet smell).

  • Insoluble in water; soluble in non-polar solvents.

  • Boiling points increase with molecular size.

  • Straight chain alkenes have higher boiling points than branched isomers.

  • Diagram 19 – NEET Chemistry Hydrocarbons

Solved Examples

Ex 1

  • Compare boiling points: n-butene > isobutene due to less branching.

Practice Set

  • Q1: Ethene is:

    • A. Colourless and odourless

    • B. Colourless with faint sweet smell

    • C. Coloured gas

    • D. Solid at room temperature

  • Q2: Alkenes are generally:

    • A. Soluble in water

    • B. Insoluble in water

    • C. Ionic compounds

    • D. Polar solvents

  • Q3: Boiling point trend in alkenes is:

    • A. Branched > straight chain

    • B. Straight chain > branched

    • C. No difference

    • D. Random

Answer Key

  • Q1: B - Ethene has faint sweet smell.

  • Q2: B - Alkenes are insoluble in water.

  • Q3: B - Straight chain alkenes have higher boiling points.

Memory Aids

  • Ethene smell: faint sweet.

  • Alkenes: non-polar, water insoluble.

  • Boiling point: straight > branched.

Markovnikov and Anti-Markovnikov Rule

Rules

  • Markovnikov's rule: In addition of HX to unsymmetrical alkene, H attaches to carbon with more H atoms; X attaches to carbon with fewer H atoms.

  • Anti-Markovnikov's rule (Peroxide effect): In presence of peroxide, HBr adds opposite to Markovnikov's rule.

  • Peroxide effect observed only with HBr, not HCl or HI.

  • Diagram 20 – NEET Chemistry Hydrocarbons

Solved Examples

Ex 1

  • Addition of HBr to propene without peroxide: Br attaches to secondary carbon (Markovnikov product).

  • Addition of HBr to propene with peroxide: Br attaches to primary carbon (Anti-Markovnikov product).

Practice Set

  • Q1: Markovnikov's rule applies to addition of:

    • A. HCl

    • B. HBr without peroxide

    • C. HBr with peroxide

    • D. HI

  • Q2: Anti-Markovnikov addition occurs with:

    • A. HCl

    • B. HBr with peroxide

    • C. HI

    • D. HBr without peroxide

  • Q3: In Markovnikov addition, the halogen attaches to carbon with:

    • A. More hydrogen atoms

    • B. Fewer hydrogen atoms

    • C. Equal hydrogen atoms

    • D. No hydrogen atoms

Answer Key

  • Q1: B - Markovnikov's rule applies to HBr without peroxide.

  • Q2: B - Anti-Markovnikov addition occurs with HBr in presence of peroxide.

  • Q3: B - Halogen attaches to carbon with fewer hydrogen atoms.

Memory Aids

  • Markovnikov: \"Rich get richer\" (H to carbon with more H).

  • Anti-Markovnikov: peroxide reverses addition in HBr.

  • Peroxide effect only with HBr.

Dienes and Polymerization

Dienes Classification

  • Isolated dienes: Double bonds separated by >1 single bond.

  • Conjugated dienes: Double bonds separated by exactly one single bond.

  • Cumulated dienes: Double bonds adjacent on same carbon.

  • Diagram 21 – NEET Chemistry Hydrocarbons

Polymerization

  • Alkenes polymerize by opening double bonds under heat, pressure, and catalyst.

  • Example: Propene polymerizes to polypropylene.

  • Polymer structure: repeating units with side groups (e.g., CH3 in polypropylene).

    Diagram 22 – NEET Chemistry Hydrocarbons
Diagram 23 – NEET Chemistry Hydrocarbons

Solved Examples

Ex 1

  • Polymerization of propene: n CH3-CH=CH2 → (−CH−CH2−)n with CH3 side group.

Practice Set

  • Q1: Conjugated dienes have double bonds separated by:

    • A. No bond

    • B. One single bond

    • C. Two single bonds

    • D. Adjacent carbons

  • Q2: Polymerization of alkenes requires:

    • A. Heat, pressure, catalyst

    • B. Cold temperature

    • C. No catalyst

    • D. Light only

  • Q3: Polypropylene is formed from:

    • A. Ethene

    • B. Propene

    • C. Butene

    • D. Benzene

Answer Key

  • Q1: B - Conjugated dienes have double bonds separated by one single bond.

  • Q2: A - Polymerization requires heat, pressure, and catalyst.

  • Q3: B - Polypropylene is polymer of propene.

Memory Aids

  • Dienes: isolated (separated), conjugated (one bond), cumulated (adjacent).

  • Polymerization: double bonds open and link to form long chains.

Alkynes

Definition and General Properties

  • Alkynes are unsaturated hydrocarbons with the general formula CnH2n-2.

  • They contain at least one carbon-carbon triple bond (≡).

  • Examples: Ethyne (acetylene) C2H2, Propyne (methyl acetylene) C3H4.

  • Alkynes have sp-hybridised carbons, making them more acidic than alkenes and alkanes.

Isomerism

  • Ethyne shows no isomerism.

  • Other alkynes exhibit chain, position, and functional isomerism.

  • Ring-chain isomerism example: Propyne (alkyne) and cyclopropene (cycloalkene).

Diagram 24 – NEET Chemistry Hydrocarbons

Structure

  • Each carbon in acetylene is sp-hybridised.

  • One sp orbital from each carbon overlaps axially to form a C–C σ bond.

  • Remaining sp orbitals overlap with hydrogen 1s orbitals forming two C–H σ bonds.

  • Two unhybridised p orbitals on each carbon overlap sideways forming two C–C π bonds.

Preparation of Acetylene

  • From calcium carbide (CaC2): CaC2 + 2H2O → C2H2 + Ca(OH)2

  • Calcium carbide is prepared by heating CaO with carbon.

  • From vicinal dihalides: Vicinal dihalide + 2KOH (alc) → alkene; then treated with NaNH2 to form acetylene.

Diagram 25 – NEET Chemistry Hydrocarbons

Physical Properties

  • First three alkynes are gases; next eight are liquids; higher members are solids.

  • All are colourless and odourless except ethyne which has a characteristic odour.

  • Insoluble in water; soluble in non-polar solvents.

  • Melting point, boiling point, and density increase with molar mass.

Acidity

  • Alkynes are acidic due to sp-hybridised carbon with 50% s-character.

  • Acetylene reacts with sodium in liquid ammonia: 2Na + C2H2 → 2NaC≡CH + H2

  • Acidic strength order: Alkyne (CH≡CH) > Alkene (CH2=CH2) > Alkane (CH3–CH3).

Diagram 26 – NEET Chemistry Hydrocarbons

Chemical Reactions

  • Addition Reactions:

    • Hydrogenation: C2H2 + 2H2 (Ni, heat) → C2H6

    • Halogenation: C2H2 + Cl2 → C2H2Cl2

    • Hydrohalogenation: Stepwise addition of HBr to form bromoalkenes and dibromoalkanes.

    • Hydration: C2H2 + H2O (H2SO4, HgSO4) → Acetaldehyde (via tautomerism).

  • Polymerisation:

    • Linear polymerisation forms polyacetylene.

    • Cyclic polymerisation of 3 acetylene molecules forms benzene.

Diagram 27 – NEET Chemistry Hydrocarbons

Solved Examples

Ex 1

  • Write the product when acetylene reacts with excess hydrogen in presence of Ni catalyst.

  • Solution: C2H2 + 2H2 → C2H6 (ethane)

Ex 2

  • Explain the formation of sodium acetylide from acetylene.

  • Solution: C2H2 + 2Na → 2NaC≡CH + H2

Practice Set

Q1

  • Which of the following is the molecular formula of alkynes?

  • A. CnH2n+2

  • B. CnH2n

  • C. CnH2n-2

  • D. CnHn

Q2

  • What is the product when acetylene reacts with water in presence of H2SO4 and HgSO4?

  • A. Ethanol

  • B. Acetaldehyde

  • C. Ethane

  • D. Ethene

Q3

  • Which of the following shows ring-chain isomerism?

  • A. 1-Pentyne and 2-Pentyne

  • B. Propyne and Cyclopropene

  • C. 1-Pentyne and 3-Methyl-1-butyne

  • D. 1,3-Pentadiene and 1-Pentyne

Answer Key

  • Q1: C. Alkynes have formula CnH2n-2 due to one triple bond.

  • Q2: B. Hydration of acetylene forms acetaldehyde via tautomerism.

  • Q3: B. Propyne (alkyne) and cyclopropene (cycloalkene) are ring-chain isomers.

Memory Aids

  • Alkyne formula: \"2n minus 2\" hydrogens.

  • Acidity order: Alkyne > Alkene > Alkane due to s-character.

  • Ring-chain isomerism: Linear alkynes vs cyclic alkenes with same formula.

  • Preparation of acetylene: Calcium carbide + water or vicinal dihalides + strong base.

Aromatic Hydrocarbons

Overview

  • Aromatic hydrocarbons, also called arenes, contain benzene rings.

  • General formula: CnH2n-6m, where n ≥ 6, m = number of benzene rings.

Nomenclature

  • Nucleus: Benzene ring with sp2 hybridised carbons and alternating double bonds.

  • Diagram 28 – NEET Chemistry Hydrocarbons
  • Side Chain: Alkyl or aliphatic groups replacing hydrogen on benzene.

  • Monosubstituted derivatives: One hydrogen replaced by a substituent.

  • Disubstituted derivatives: Positions relative to first substituent: ortho (1,2), meta (1,3), para (1,4).

  • Diagram 29 – NEET Chemistry Hydrocarbons

Isomerism

  • All six hydrogens in benzene are equivalent; only one monosubstituted derivative possible.

  • Position isomerism: Two substituents give ortho, meta, para isomers.

  • Diagram 30 – NEET Chemistry Hydrocarbons
  • Three identical substituents yield three isomers; mixed substituents increase isomer count.

  • Diagram 31 – NEET Chemistry Hydrocarbons
  • Functional isomerism: Example: Benzyl alcohol vs o-Cresol (C7H8O).

  • Diagram 32 – NEET Chemistry Hydrocarbons
  • Tautomerism: Keto-enol tautomerism in acetophenone.

  • Diagram 33 – NEET Chemistry Hydrocarbons

Structure of Benzene

  • Each carbon is sp2 hybridised; forms σ bonds with adjacent carbons and hydrogen.

  • Unhybridised p orbitals overlap to form delocalised π-electron cloud above and below the plane.

  • High unsaturation and resonance stability.

  • Diagram 34 – NEET Chemistry Hydrocarbons

Huckel Rule of Aromaticity

  • Criteria for aromaticity:

    • Planar cyclic structure.

    • Complete delocalisation of π-electrons.

    • Contains (4n + 2) π-electrons, n = 0,1,2...

  • Diagram 35 – NEET Chemistry Hydrocarbons
  • Comparison of aromatic, anti-aromatic, and non-aromatic compounds based on structure and electron count.

  • Diagram 36 – NEET Chemistry Hydrocarbons

Preparation of Benzene

  • Cyclic polymerization of ethyne at 873 K in red-hot iron tube.

  • Decarboxylation of aromatic acids with NaOH and CaO.

  • Reduction of phenol with zinc and heat.

  • Diagram 37 – NEET Chemistry Hydrocarbons

Physical Properties

  • Non-polar, colourless liquids or solids with characteristic aroma.

  • Immiscible with water, miscible with organic solvents.

  • Burn with sooty flame.

  • Boiling point increases with molecular size due to van der Waals forces.

  • Melting point depends on size and symmetry; p-isomer of xylenes has highest melting point.

Chemical Properties

  • Less reactive than alkenes/alkynes due to delocalised π-electrons.

  • Undergo electrophilic substitution reactions (EAS).

  • Can undergo addition and oxidation under special conditions.

  • Diagram 38 – NEET Chemistry Hydrocarbons
  • Common EAS reactions: nitration, sulphonation, Friedel-Crafts acylation and alkylation, halogenation.

  • Oxidation breaks side chains to CO2 and H2O.

  • Addition under UV light; reduction to cyclohexane with H2/Ni.

  • Diagram 39 – NEET Chemistry Hydrocarbons

Directive Influence of Functional Groups

  • Ortho and para directing groups: Groups with +M effect increase electron density at ortho and para positions, favoring electrophilic attack there.

  • Examples: —CH3, —C2H5, —OCH3, —NH2, —OH, halogens (F, Cl, Br, I).

  • Diagram 40 – NEET Chemistry Hydrocarbons
  • Meta directing groups: Groups with -M effect decrease electron density at ortho and para positions, directing electrophiles to meta position.

  • Examples: —NO2, —CHO, —COR, —COOH, —COOR, —SO3H, —CN.

  • Diagram 41 – NEET Chemistry Hydrocarbons
  • Halogens are ortho/para directing but deactivating due to electronegativity.

Solved Examples

  • Ex 1: Identify the directing effect of —OH group in phenol.
    Answer: —OH is an ortho/para directing group due to +M effect increasing electron density at these positions.

  • Ex 2: Predict the major product of nitration of toluene.
    Answer: Nitro group substitutes at ortho and para positions relative to —CH3 group (ortho/para directing).

  • Ex 3: How many position isomers are possible for disubstituted benzene with two different substituents?
    Answer: Three isomers (ortho, meta, para).

Practice Set

  • Q1: Which of the following is an ortho/para directing group?
    A. —NO2
    B. —CH3
    C. —COOH
    D. —CN

  • Q2: How many π-electrons are present in benzene according to Huckel's rule?
    A. 4
    B. 6
    C. 8
    D. 10

  • Q3: Which reaction converts phenol to benzene?
    A. Decarboxylation
    B. Reduction with Zn
    C. Friedel-Crafts alkylation
    D. Nitration

Answer Key

  • Q1: B —CH3 is ortho/para directing due to +M effect.

  • Q2: B Benzene has 6 π-electrons fitting (4n+2) with n=1.

  • Q3: B Reduction of phenol with Zn produces benzene.

Memory Aids

  • Huckel's rule: Aromatic if π-electrons = 4n + 2.

  • Ortho/para directors: Groups with lone pairs or alkyl groups (+M effect).

  • Meta directors: Electron withdrawing groups (-M effect).

  • Halogens: Ortho/para directing but deactivating.

  • Electrophilic substitution preferred over addition in benzene due to resonance stability.

Carcinogenicity and Toxicity

Overview

  • Benzene and polynuclear aromatic hydrocarbons (PAHs) with more than two fused benzene rings are toxic and carcinogenic.

  • PAHs form during incomplete combustion of organic materials such as tobacco, coal, and petroleum.

  • These compounds enter the human body, undergo biochemical transformations, damage DNA, and induce cancer.

Solved Examples

  • Ex 1: Identify a source of carcinogenic PAHs.
    Answer: Incomplete combustion of tobacco produces carcinogenic PAHs.

  • Ex 2: Explain the effect of PAHs on human DNA.
    Answer: PAHs metabolize into reactive intermediates that bind DNA, causing mutations leading to cancer.

Practice Set

  • Q1: Which of the following is a carcinogenic compound?
    A. Benzene
    B. Methane
    C. Ethanol
    D. Water

  • Q2: Polynuclear aromatic hydrocarbons are primarily formed by:
    A. Complete combustion of organic matter
    B. Incomplete combustion of organic matter
    C. Photosynthesis
    D. Electrolysis of water

  • Q3: The mechanism by which PAHs cause cancer involves:
    A. Direct DNA repair
    B. DNA damage through reactive metabolites
    C. Protein synthesis enhancement
    D. Increased oxygen transport

Answer Key

  • Q1: A. Benzene - It is a toxic and carcinogenic aromatic hydrocarbon.

  • Q2: B. Incomplete combustion of organic matter - This process forms PAHs.

  • Q3: B. DNA damage through reactive metabolites - PAHs metabolize into compounds that bind and damage DNA.

Memory Aids

  • PAHs = Multiple fused benzene rings → Toxic + Carcinogenic.

  • Incomplete combustion = Source of PAHs (think tobacco smoke, coal burning).

  • PAHs → Metabolized → DNA damage → Cancer.

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View