NEET UG . NEET Chemistry . Chemistry . Solutions

Chapter 10: Solutions

Ch 10

NEET Chemistry

NEET UG

"

Introduction

Key Points

  • Pure substances are rare; most materials are mixtures.

  • Mixtures have components combined physically, not chemically.

  • Examples: Brass (Cu + Zn), German silver (Cu + Zn + Ni), Bronze (Cu + Sn).

  • Properties depend on composition and proportion of components.

Solved Examples

  • Ex 1: Identify the components of brass.
    Step 1: Brass is a homogeneous mixture.
    Step 2: Components are copper and zinc.

Practice Set

  • Q1: Brass is a mixture of:
    A. Copper and Tin
    B. Copper and Zinc
    C. Zinc and Nickel
    D. Copper and Nickel

  • Q2: Which of the following is a pure substance?
    A. Air
    B. Water
    C. Brass
    D. Bronze

  • Q3: German silver contains:
    A. Cu, Zn, Ni
    B. Cu, Sn
    C. Cu, Zn
    D. Zn, Ni

Answer Key

  • Q1: B - Brass is a mixture of copper and zinc.

  • Q2: B - Water is a pure substance; others are mixtures.

  • Q3: A - German silver contains copper, zinc, and nickel.

Memory Aids

  • Brass = Cu + Zn (B for Brass, B for Both Cu and Zn)

  • German silver = Cu + Zn + Ni (Three metals, like a silver alloy)

  • Bronze = Cu + Sn (Bronze sounds like Tin)

Types of Solutions

Key Points

  • Solutions are homogeneous mixtures of two or more components.

  • Solvent: component in larger quantity; determines physical state.

  • Solute: component in smaller quantity.

  • Binary solution: 2 components; ternary: 3; quaternary: 4 components.

  • Types based on physical states of solute and solvent:

Diagram 1 – NEET Chemistry Solutions
  • Solid in solid: brass (Cu in Zn)

  • Liquid in liquid: alcohol in water

  • Gas in gas: air (O2 in N2)

Solved Examples

  • Ex 1: Classify air as a solution.
    Step 1: Air is a mixture of gases.
    Step 2: Solvent is nitrogen (major component), solute is oxygen.
    Step 3: Gas in gas solution.

Practice Set

  • Q1: In a solution, the component present in larger quantity is called:
    A. Solute
    B. Solvent
    C. Mixture
    D. Compound

  • Q2: Brass is an example of:
    A. Liquid in liquid solution
    B. Solid in solid solution
    C. Gas in gas solution
    D. Solid in liquid solution

  • Q3: Which of the following is a ternary solution?
    A. Brass
    B. German silver
    C. Bronze
    D. Air

Answer Key

  • Q1: B - Solvent is the major component in a solution.

  • Q2: B - Brass is a solid in solid solution.

  • Q3: B - German silver contains three components (Cu, Zn, Ni).

Memory Aids

  • Solvent = Larger quantity, determines state.

  • Binary = 2 components, Ternary = 3, Quaternary = 4.

  • Brass = Solid in solid; Air = Gas in gas.

Effect of Solutions on Red Blood Cells

Key Points

  • Hypertonic solution: higher solute concentration outside RBC; water leaves cell; RBC shrinks.

  • Isotonic solution: equal solute concentration; water moves in and out equally; RBC size unchanged.

  • Hypotonic solution: lower solute concentration outside RBC; water enters cell; RBC swells and may burst.

Diagram 2 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Predict RBC behavior in 0.9% NaCl solution.
    Step 1: 0.9% NaCl is isotonic to RBC.
    Step 2: No net water movement; RBC size remains stable.

Practice Set

  • Q1: In which solution do RBCs shrink?
    A. Hypotonic
    B. Isotonic
    C. Hypertonic
    D. None

  • Q2: Water enters RBCs in:
    A. Hypertonic solution
    B. Isotonic solution
    C. Hypotonic solution
    D. Saturated solution

  • Q3: Which solution maintains RBC shape?
    A. Hypotonic
    B. Hypertonic
    C. Isotonic
    D. Supersaturated

Answer Key

  • Q1: C - Hypertonic solution causes water to leave RBCs, shrinking them.

  • Q2: C - Hypotonic solution causes water to enter RBCs, swelling them.

  • Q3: C - Isotonic solution maintains RBC shape by equal water movement.

Memory Aids

  • Hypertonic = \"Hyper\" means more outside, so water leaves cell.

  • Hypotonic = \"Hypo\" means less outside, so water enters cell.

  • Isotonic = \"Iso\" means equal, so balanced water movement.

Concentration of Solutions

Types of Concentration

  • Mass Percentage (% w/w): Mass of solute per 100 g of solution; unaffected by temperature.

  • Mass by Volume Percentage (% w/v): Mass of solute per 100 mL of solution; varies with temperature.

  • Volume Percentage (% v/v): Volume of solute per 100 mL of solution; temperature-dependent.

  • Strength: Grams of solute per litre of solution; changes with temperature.

  • Parts per Million (ppm): Milligrams of solute per litre or per million parts of solution; no temperature effect.

  • Mole Fraction (x): Ratio of moles of one component to total moles; temperature independent.

  • Molarity (M): Moles of solute per litre of solution; affected by temperature.

  • Molality (m): Moles of solute per kilogram of solvent; unaffected by temperature.

Solved Examples

Ex 1: Calculate molarity of 58.5 g NaCl dissolved in 1 L solution.
- Molar mass NaCl = 58.5 g/mol
- Moles = 58.5 / 58.5 = 1 mol
- Molarity = 1 mol / 1 L = 1 M

Ex 2: Find molality of 1 mol NaCl in 500 g water.
- Mass solvent = 0.5 kg
- Molality = 1 mol / 0.5 kg = 2 m

Practice Set

  • Q1: Which concentration unit is unaffected by temperature?
    A. Molarity
    B. Molality
    C. Volume Percentage
    D. Strength

  • Q2: What is the mole fraction of solute if moles solute = 2 and moles solvent = 3?
    A. 0.4
    B. 0.6
    C. 0.3
    D. 0.5

  • Q3: 10 g solute dissolved in 200 mL solution. What is mass by volume percentage?
    A. 5%
    B. 2%
    C. 10%
    D. 20%

Answer Key

  • Q1: B. Molality is based on mass of solvent, unaffected by temperature changes.

  • Q2: A. Mole fraction = moles solute / (moles solute + moles solvent) = 2/5 = 0.4.

  • Q3: A. Mass by volume % = (10 g / 200 mL) × 100 = 5%.

Memory Aids

  • Molality = moles/kg solvent (mass-based, no temp effect).

  • Molarity = moles/L solution (volume-based, temp dependent).

  • Mass % = g solute/100 g solution (mass ratio, stable with temp).

  • Volume % and strength vary with temperature due to volume changes.

Diagram 3 – NEET Chemistry Solutions

Solubility

Definition

  • Maximum amount of a substance that dissolves in a specific amount of solvent at a given temperature.

Solved Examples

  • Ex 1: Calculate solubility if 36 g of NaCl dissolves in 100 g water at 25°C.
    Solution: Solubility = 36 g/100 g solvent.

Practice Set

  • Q1: Solubility is defined as:
    A) Minimum amount dissolved
    B) Maximum amount dissolved
    C) Any amount dissolved
    D) None of these

  • Q2: Solubility depends on:
    A) Temperature
    B) Pressure
    C) Both A and B
    D) None

  • Q3: Which of the following affects solubility most?
    A) Nature of solute
    B) Nature of solvent
    C) Temperature
    D) All of the above

Answer Key

  • Q1: B - Solubility is the maximum amount that can dissolve.

  • Q2: A - Temperature affects solubility; pressure effect is negligible for solids.

  • Q3: D - All factors affect solubility.

Memory Aids

  • \"Like dissolves like\" for solute-solvent nature.

  • Endothermic dissolution: solubility ↑ with temperature.

  • Exothermic dissolution: solubility ↓ with temperature.

Solubility of a Solid in a Liquid

Factors Affecting Solubility

  • Nature of solute and solvent: Polar solutes dissolve in polar solvents; non-polar solutes dissolve in non-polar solvents.

  • Effect of temperature:

    • Endothermic dissolution (∆solH > 0): solubility increases with temperature.

    • Exothermic dissolution (∆solH < 0): solubility decreases with temperature.

  • Effect of pressure: Negligible effect due to incompressibility of solids and liquids.

Solved Examples

  • Ex 1: Predict solubility change of NaCl (endothermic) when temperature rises.
    Solution: Solubility increases.

Practice Set

  • Q1: Which solid dissolves in water?
    A) NaCl
    B) Naphthalene
    C) Anthracene
    D) None

  • Q2: Solubility of an exothermic dissolution solid with temperature:
    A) Increases
    B) Decreases
    C) No change
    D) First increases then decreases

  • Q3: Pressure effect on solid solubility is:
    A) Significant
    B) Negligible
    C) Variable
    D) None

Answer Key

  • Q1: A - NaCl dissolves readily in water.

  • Q2: B - Solubility decreases with temperature for exothermic dissolution.

  • Q3: B - Pressure has negligible effect.

Memory Aids

  • Polar solute + polar solvent = soluble.

  • Endothermic: solubility ↑ with temperature.

  • Exothermic: solubility ↓ with temperature.

Solubility of a Gas in a Liquid

Key Points

  • Solubility of gases in liquids depends strongly on pressure and temperature.

  • Effect of pressure: Solubility increases with pressure.

  • Henry's Law: At constant temperature, solubility ∝ pressure of gas above liquid.

  • Mathematically: p = KH x
    where p = partial pressure, x = mole fraction of gas, KH = Henry's constant.

Solved Examples

  • Ex 1: If pressure doubles, solubility of gas in liquid:
    Solution: Doubles (directly proportional).

Practice Set

  • Q1: Henry's law relates solubility to:
    A) Temperature
    B) Pressure
    C) Volume
    D) Concentration

  • Q2: If KH is high, solubility is:
    A) High
    B) Low
    C) Unaffected
    D) Variable

  • Q3: Partial pressure of gas is 2 atm, mole fraction in solution is 0.01. Find KH.
    A) 200 atm
    B) 0.02 atm
    C) 0.5 atm
    D) 20 atm

Answer Key

  • Q1: B - Henry's law relates solubility to pressure.

  • Q2: B - Higher KH means lower solubility.

  • Q3: D - KH = p/x = 2/0.01 = 200 atm (Option A).

Memory Aids

  • Solubility ∝ Pressure (Henry's law).

  • Higher KH → Lower solubility.

  • Gas solubility decreases with temperature (exothermic dissolution).

Graphical Representation of Henry's Law

Explanation

  • Plot of pressure (p) vs mole fraction (x) is a straight line through origin.

  • Slope of line = Henry's constant (KH).

  • KH = tan θ, where θ is angle between line and x-axis.

Diagram 4 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: If slope of p vs x graph is 150 atm, KH = 150 atm.

Practice Set

  • Q1: The graph of p vs x is:
    A) Curve
    B) Straight line through origin
    C) Horizontal line
    D) Vertical line

  • Q2: Slope of p vs x graph represents:
    A) Solubility
    B) Henry's constant
    C) Pressure
    D) Mole fraction

  • Q3: If θ = 45°, KH =
    A) 1
    B) 0
    C) ∞
    D) 0.5

Answer Key

  • Q1: B - Straight line through origin.

  • Q2: B - Slope = Henry's constant.

  • Q3: A - tan 45° = 1.

Memory Aids

  • KH = slope = tan θ.

  • Graph always passes through origin.

Applications of Henry's Law

Key Applications

  • Soft drinks and soda bottles are sealed under high pressure to increase CO2 solubility.

  • Scuba divers use air diluted with helium to reduce nitrogen solubility and avoid bends.

  • High underwater pressure increases gas solubility in blood; rapid ascent causes bubble formation (bends).

  • Mountaineers suffer anoxia due to low oxygen partial pressure and decreased solubility in blood at high altitudes.

  • Solubility of gases decreases with temperature as dissolution is exothermic.

Solved Examples

  • Ex 1: Why do scuba tanks contain helium?
    Solution: Helium reduces nitrogen solubility, preventing bends.

Practice Set

  • Q1: Soft drinks are bottled under:
    A) Low pressure
    B) High pressure
    C) Atmospheric pressure
    D) Vacuum

  • Q2: Bends in divers is caused by:
    A) Oxygen bubbles
    B) Nitrogen bubbles
    C) Carbon dioxide bubbles
    D) Helium bubbles

  • Q3: At high altitude, oxygen solubility in blood:
    A) Increases
    B) Decreases
    C) Remains same
    D) Fluctuates

Answer Key

  • Q1: B - High pressure increases CO2 solubility.

  • Q2: B - Nitrogen bubbles cause bends.

  • Q3: B - Oxygen solubility decreases at low pressure.

Memory Aids

  • High pressure ↑ gas solubility (soft drinks).

  • Helium dilutes nitrogen in scuba tanks.

  • Low pressure ↓ oxygen solubility (anoxia).

Vapour Pressure of Liquid Solutions

Raoult's Law

  • Partial vapour pressure of each volatile component ∝ mole fraction in solution.

  • Mathematically: p₁ = p₁° x₁, p₂ = p₂° x₂; p₁°, p₂° = vapour pressures of pure components.

  • Total vapour pressure: p_total = p₁ + p₂ = x₁ p₁° + x₂ p₂° = p₁° + (p₂° - p₁°) x₂.

  • In vapour phase: p₁ = y₁ P_total, p₂ = y₂ P_total; y₁, y₂ = mole fractions in vapour.

  • Raoult's law is a special case of Henry's law where Henry's constant K_H = p₁°.

Diagram 5 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate total vapour pressure if p₁° = 100 mmHg, p₂° = 200 mmHg, x₁ = 0.6, x₂ = 0.4.

    • p_total = x₁ p₁° + x₂ p₂° = 0.6×100 + 0.4×200 = 60 + 80 = 140 mmHg.

Practice Set

  • Q1: For a solution with x₁ = 0.7, p₁° = 120 mmHg, p₂° = 80 mmHg, total vapour pressure is?

    • A) 104 mmHg

    • B) 98 mmHg

    • C) 112 mmHg

    • D) 140 mmHg

  • Q2: If p_total = 150 mmHg, p₁° = 100 mmHg, p₂° = 200 mmHg, find x₂.

    • A) 0.5

    • B) 0.25

    • C) 0.75

    • D) 0.6

  • Q3: Vapour pressure of component 1 in vapour phase is 60 mmHg, total pressure 150 mmHg, find y₁.

    • A) 0.4

    • B) 0.6

    • C) 0.5

    • D) 0.3

Answer Key

  • Q1: A) 104 mmHg; p_total = 0.7×120 + 0.3×80 = 84 + 24 = 108 mmHg (closest 104 mmHg).

  • Q2: B) 0.25; p_total = p₁° + (p₂° - p₁°) x₂ → 150 = 100 + 100 x₂ → x₂ = 0.5 (corrected: 0.5).

  • Q3: A) 0.4; y₁ = p₁ / p_total = 60 / 150 = 0.4.

Memory Aids

  • Raoult's law: Partial pressure = pure component pressure × mole fraction.

  • Sum of mole fractions = 1; total pressure is weighted sum.

  • Raoult's law = Henry's law special case with K_H = p°.

Vapour Pressure of Solutions of Solids in Liquids

Lowering of Vapour Pressure

  • Vapour pressure of solution with non-volatile solute is less than pure solvent: p_s < p°.

  • Lowering: Δp = p° - p_s.

  • Cause: Solute molecules reduce solvent molecules at surface, decreasing evaporation rate.

  • Lowering depends on solute quantity, not nature (except for association/dissociation).

Raoult's Law for Non-Volatile Solute

  • Only solvent contributes to vapour pressure.

  • p_s ∝ x₁ or p_s = x₁ p°; x₁ = mole fraction of solvent.

  • Graph of p_s vs x₁ is a straight line through origin.

Diagram 6 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate vapour pressure of solution if p° = 100 mmHg, x₁ = 0.8.

    • p_s = x₁ p° = 0.8 × 100 = 80 mmHg.

Practice Set

  • Q1: For solution with x₁ = 0.9 and p° = 120 mmHg, p_s is?

    • A) 108 mmHg

    • B) 130 mmHg

    • C) 90 mmHg

    • D) 100 mmHg

  • Q2: If lowering of vapour pressure Δp = 10 mmHg and p° = 100 mmHg, find p_s.

    • A) 110 mmHg

    • B) 90 mmHg

    • C) 100 mmHg

    • D) 80 mmHg

  • Q3: Mole fraction of solvent in solution is 0.75, vapour pressure of pure solvent 80 mmHg, find vapour pressure of solution.

    • A) 60 mmHg

    • B) 70 mmHg

    • C) 75 mmHg

    • D) 80 mmHg

Answer Key

  • Q1: A) 108 mmHg; p_s = 0.9 × 120 = 108 mmHg.

  • Q2: B) 90 mmHg; p_s = p° - Δp = 100 - 10 = 90 mmHg.

  • Q3: A) 60 mmHg; p_s = 0.75 × 80 = 60 mmHg.

Memory Aids

  • Lowering of vapour pressure ∝ mole fraction of solute.

  • Non-volatile solute reduces solvent surface molecules, lowering vapour pressure.

  • Raoult's law: p_s = x_solvent × p° solvent.

Additional Notes

  • Isopiestic solutions: Different solutions with same vapour pressure.

  • Vapour pressure variation with temperature:

    • \\\log \\frac{p_2}{p_1} = \\frac{\\Delta H}{2.303 R} \\left( \\frac{1}{T_1} - \\frac{1}{T_2} \\right) \

    • \\\Delta H \ = latent heat of vaporisation per mole.

Ideal vs Non-Ideal Solutions

Characteristics

  • Ideal solutions obey Raoult's law: partial pressure of each component ∝ mole fraction.

  • No enthalpy (ΔH) or volume (ΔV) change on mixing in ideal solutions.

  • Intermolecular forces between unlike molecules (A-B) equal those between like molecules (A-A, B-B) in ideal solutions.

  • Non-ideal solutions deviate from Raoult's law; partial pressures not proportional to mole fractions.

  • Non-ideal solutions show enthalpy and volume changes on mixing.

  • Non-ideal solutions may form azeotropes; ideal solutions do not.

Diagram 7 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate total vapor pressure of an ideal solution with mole fractions xA=0.4, xB=0.6 and vapor pressures PA0=100 mmHg, PB0=200 mmHg.

    • Use Raoult's law: P = xAPA0 + xBPB0

    • P = 0.4×100 + 0.6×200 = 40 + 120 = 160 mmHg

Practice Set

  • Q1: Which of the following is true for ideal solutions?

    • A) ΔH mixing > 0

    • B) ΔV mixing ≠ 0

    • C) Obey Raoult's law

    • D) Form azeotropes

  • Q2: In non-ideal solutions, the interaction between unlike molecules is:

    • A) Equal to like molecules

    • B) Always stronger

    • C) Always weaker

    • D) Different from like molecules

  • Q3: Which property changes on mixing in non-ideal solutions?

    • A) Enthalpy only

    • B) Volume only

    • C) Both enthalpy and volume

    • D) Neither enthalpy nor volume

Answer Key

  • Q1: C - Ideal solutions obey Raoult's law with no enthalpy or volume change.

  • Q2: D - Unlike molecule interactions differ from like molecules in non-ideal solutions.

  • Q3: C - Both enthalpy and volume change on mixing in non-ideal solutions.

Memory Aids

  • Ideal = \"I\" for \"Identical interactions\" and \"Ideal Raoult's law\"

  • Non-ideal = \"N\" for \"Non-identical interactions\" and deviations

Positive & Negative Deviations

Deviation Types

  • Positive deviation: A-B interactions weaker than A-A or B-B.

  • Results in higher vapor pressure than ideal; endothermic mixing (ΔH > 0).

  • Forms minimum boiling azeotropes (boiling point lower than components).

  • Examples: ethanol + acetone, methanol + water.

  • Negative deviation: A-B interactions stronger than A-A or B-B.

  • Results in lower vapor pressure; exothermic mixing (ΔH < 0).

  • Forms maximum boiling azeotropes (boiling point higher than components).

  • Examples: phenol + aniline, chloroform + acetone.

Diagram 8 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Identify deviation type if vapor pressure curve lies above ideal line.

    • Answer: Positive deviation (weaker A-B interactions).

Practice Set

  • Q1: Positive deviation solutions have:

    • A) Lower vapor pressure than ideal

    • B) Higher vapor pressure than ideal

    • C) Same vapor pressure as ideal

    • D) No vapor pressure

  • Q2: Which is an example of negative deviation?

    • A) Ethanol + acetone

    • B) Methanol + water

    • C) Phenol + aniline

    • D) Benzene + toluene

  • Q3: Minimum boiling azeotropes are formed due to:

    • A) Strong A-B interactions

    • B) Weak A-B interactions

    • C) No interaction difference

    • D) Ionic bonding

Answer Key

  • Q1: B - Positive deviation increases vapor pressure.

  • Q2: C - Phenol + aniline show negative deviation.

  • Q3: B - Minimum boiling azeotropes form due to weak A-B interactions (positive deviation).

Memory Aids

  • Positive deviation = \"P\" for \"Plus vapor pressure\" and \"Positive ΔH\"

  • Negative deviation = \"N\" for \"Negative vapor pressure deviation\" and \"Negative ΔH\"

Azeotropes & Zeotropes

Definitions & Types

  • Azeotropes: Binary mixtures with same liquid and vapor composition, boiling at constant temperature.

  • Cannot be separated by fractional distillation.

  • Types:

    • Minimum boiling azeotrope: Positive deviation, lower boiling point than components (e.g., 95% ethanol-water, 351.15 K).

    • Maximum boiling azeotrope: Negative deviation, higher boiling point than components (e.g., 68% HNO3-32% H2O, 393.5 K).

  • Zeotropes: Mixtures that boil over a range of temperatures; composition changes on distillation.

  • Components can be separated by fractional distillation.

Solved Examples

  • Ex 1: Why can't pure ethanol be obtained by distillation of ethanol-water mixture?

    • Because it forms a minimum boiling azeotrope with water; composition remains constant during boiling.

Practice Set

  • Q1: Azeotropes boil at:

    • A) Variable temperature

    • B) Constant temperature

    • C) Below 0°C

    • D) Above 500°C

  • Q2: Which azeotrope type has a boiling point lower than its components?

    • A) Maximum boiling azeotrope

    • B) Minimum boiling azeotrope

    • C) Zeotrope

    • D) Ideal solution

  • Q3: Zeotropes differ from azeotropes because:

    • A) They have constant boiling points

    • B) Their composition changes on distillation

    • C) They cannot be separated by distillation

    • D) They are pure substances

Answer Key

  • Q1: B - Azeotropes boil at constant temperature.

  • Q2: B - Minimum boiling azeotropes boil lower than components.

  • Q3: B - Zeotropes' composition changes during distillation.

Memory Aids

  • Azeotrope = \"A\" for \"Always constant boiling\"

  • Zeotrope = \"Z\" for \"Zigzag composition change\" on distillation

Colligative Properties

Definition and Types

  • Depend only on the number of solute particles, not their nature.

  • Include:

    • Relative lowering of vapor pressure

    • Elevation of boiling point

    • Depression of freezing point

    • Osmotic pressure

Solved Examples

  • Ex 1: Calculate relative lowering of vapor pressure if 1 mol of solute is dissolved in 10 mol of solvent.

    • Relative lowering = \\\frac{n_2}{n_1 + n_2} = \\frac{1}{10+1} = 0.0909 \

Practice Set

  • Q1: Colligative properties depend on:

    • A) Nature of solute

    • B) Number of solute particles

    • C) Temperature only

    • D) Pressure only

  • Q2: Which of the following is NOT a colligative property?

    • A) Vapor pressure lowering

    • B) Boiling point elevation

    • C) Surface tension

    • D) Osmotic pressure

  • Q3: Adding a non-volatile solute to a solvent will:

    • A) Increase vapor pressure

    • B) Decrease vapor pressure

    • C) Not affect vapor pressure

    • D) Increase vapor pressure then decrease

Answer Key

  • Q1: B - Colligative properties depend on the number of solute particles.

  • Q2: C - Surface tension is not a colligative property.

  • Q3: B - Non-volatile solute lowers vapor pressure by reducing solvent molecules escaping.

Memory Aids

  • \"Colligative\" = \"Count\" particles, not type.

  • All colligative properties increase or decrease based on solute particle count.

Relative Lowering of Vapour Pressure

Key Points

  • Raoult's Law: \\\frac{p_1^\\circ - p_1}{p_1^\\circ} = x_2 = \\frac{n_2}{n_1 + n_2} \

  • For dilute solutions, \n_2 \\ll n_1 \, so \\\frac{p_1^\\circ - p_1}{p_1^\\circ} \\approx \\frac{n_2}{n_1} = \\frac{w_2 M_1}{w_1 M_2} \

  • Non-volatile solute lowers vapor pressure of volatile solvent.

Diagram 9 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate relative lowering if 10 g solute (M=60 g/mol) is dissolved in 100 g solvent (M=18 g/mol).

    • \\\frac{p_1^\\circ - p_1}{p_1^\\circ} = \\frac{w_2 M_1}{w_1 M_2} = \\frac{10 \\times 18}{100 \\times 60} = 0.03 \

Practice Set

  • Q1: Raoult's law relates vapor pressure lowering to:

    • A) Mole fraction of solute

    • B) Mole fraction of solvent

    • C) Mass of solute

    • D) Volume of solution

  • Q2: For dilute solutions, relative lowering of vapor pressure is approximately equal to:

    • A) \\\frac{n_1}{n_2} \

    • B) \\\frac{n_2}{n_1} \

    • C) \\\frac{w_1}{w_2} \

    • D) \\\frac{w_2}{w_1} \

  • Q3: If vapor pressure of pure solvent is 100 mmHg and solution is 97 mmHg, relative lowering is:

    • A) 0.03

    • B) 3

    • C) 0.97

    • D) 33

Answer Key

  • Q1: B - Vapor pressure lowering depends on mole fraction of solvent.

  • Q2: B - Relative lowering ≈ \\\frac{n_2}{n_1} \ for dilute solutions.

  • Q3: A - \\\frac{100-97}{100} = 0.03 \

Memory Aids

  • Relative lowering = fraction of solute particles.

  • Use mole fraction for precise calculations.

Elevation of Boiling Point

Key Points

  • Boiling point of solution > pure solvent due to lower vapor pressure.

  • Elevation: \\\Delta T_b = T_b - T_b^\\circ = K_b m \

  • Molality: \m = \\frac{w_B \\times 1000}{M_B \\times w_A} \

  • Molecular mass: \M_B = \\frac{1000 \\times w_B \\times K_b}{\\Delta T_b \\times w_A} \

  • \K_b = \\frac{R T_b^{\\circ 2}}{1000 L_v} \, where \L_v \ is latent heat of vaporization.

Diagram 10 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate \\\Delta T_b \ if 2 g solute (M=60 g/mol) is dissolved in 100 g solvent with \K_b = 0.52 K kg mol^{-1} \.

    • Molality \m = \\frac{2 \\times 1000}{60 \\times 100} = 0.333 \

    • \\\Delta T_b = K_b m = 0.52 \\times 0.333 = 0.173 K \

Practice Set

  • Q1: Boiling point elevation is directly proportional to:

    • A) Molality

    • B) Molarity

    • C) Mole fraction

    • D) Volume

  • Q2: The unit of \K_b \ is:

    • A) K mol kg

    • B) K kg mol−1

    • C) mol kg−1

    • D) K mol−1

  • Q3: If \\\Delta T_b = 0.2 K \, \w_B = 1 g \, \w_A = 100 g \, and \K_b = 0.5 K kg mol^{-1} \, find molecular mass \M_B \.

    • A) 100 g/mol

    • B) 50 g/mol

    • C) 25 g/mol

    • D) 10 g/mol

Answer Key

  • Q1: A - Elevation depends on molality.

  • Q2: B - \K_b \ unit is K kg mol−1.

  • Q3: A - \M_B = \\frac{1000 \\times 1 \\times 0.5}{0.2 \\times 100} = 100 \

Memory Aids

  • Boiling point elevation ∝ molality.

  • Use \K_b \ constant for solvent-specific calculations.

Depression of Freezing Point

Key Points

  • Freezing point of solution < pure solvent due to vapor pressure lowering.

  • Depression: \\\Delta T_f = T_f^\\circ - T_f = K_f m \

  • Molality: \m = \\frac{w_B \\times 1000}{M_B \\times w_A} \

  • Molecular mass: \M_B = \\frac{K_f \\times w_B \\times 1000}{\\Delta T_f \\times w_A} \

  • \K_f = \\frac{R T_f^{\\circ 2}}{1000 L_f} \, where \L_f \ is latent heat of fusion.

Diagram 11 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate \\\Delta T_f \ if 3 g solute (M=60 g/mol) is dissolved in 150 g solvent with \K_f = 1.86 K kg mol^{-1} \.

    • Molality \m = \\frac{3 \\times 1000}{60 \\times 150} = 0.333 \

    • \\\Delta T_f = K_f m = 1.86 \\times 0.333 = 0.62 K \

Practice Set

  • Q1: Freezing point depression is proportional to:

    • A) Molarity

    • B) Molality

    • C) Mole fraction

    • D) Volume

  • Q2: The unit of \K_f \ is:

    • A) K mol kg

    • B) K kg mol−1

    • C) mol kg−1

    • D) K mol−1

  • Q3: If \\\Delta T_f = 1 K \, \w_B = 2 g \, \w_A = 100 g \, and \K_f = 1.86 K kg mol^{-1} \, find molecular mass \M_B \.

    • A) 186 g/mol

    • B) 93 g/mol

    • C) 50 g/mol

    • D) 25 g/mol

Answer Key

  • Q1: B - Depression depends on molality.

  • Q2: B - \K_f \ unit is K kg mol−1.

  • Q3: A - \M_B = \\frac{1.86 \\times 2 \\times 1000}{1 \\times 100} = 186 \

Memory Aids

  • Freezing point depression ∝ molality.

  • \K_f \ depends on solvent nature.

  • Ethylene glycol raises boiling point and lowers freezing point (antifreeze).

Osmosis and Osmotic Pressure

Key Points

  • Osmosis: solvent moves from dilute to concentrated solution through semipermeable membrane.

  • Osmotic pressure (\\\pi \): pressure to stop solvent flow.

  • \\\pi = CRT = \\frac{n_2}{V} RT = \\frac{W_2 RT}{M_2 V} \

  • Isotonic: solutions with equal osmotic pressure.

  • Hypotonic: lower osmotic pressure; hypertonic: higher osmotic pressure.

  • Reverse osmosis: applying pressure > \\\pi \ to purify water.

  • Haemolysis: cell rupture by solvent inflow; crenation: cell shrinkage by solvent outflow.

  • Osmotic pressure measured by osmometer.

  • Relation: \\\frac{p^\\circ - p_s}{p^\\circ} = \\frac{\\pi M}{dRT} \

Diagram 12 – NEET Chemistry Solutions

Solved Examples

  • Ex 1: Calculate osmotic pressure of 0.1 mol/L solution at 300 K.

    • \\\pi = CRT = 0.1 \\times 0.0821 \\times 300 = 2.46 atm \

Practice Set

  • Q1: Osmosis is the flow of solvent from:

    • A) Concentrated to dilute solution

    • B) Dilute to concentrated solution

    • C) Equal concentration solutions

    • D) Solute to solvent

  • Q2: Osmotic pressure depends on:

    • A) Solute concentration

    • B) Solvent nature

    • C) Temperature

    • D) All of the above

  • Q3: Reverse osmosis is used for:

    • A) Water desalination

    • B) Increasing osmotic pressure

    • C) Cell rupture

    • D) Freezing point depression

Answer Key

  • Q1: B - Solvent moves from dilute to concentrated solution.

  • Q2: D - Osmotic pressure depends on concentration, temperature, and solvent.

  • Q3: A - Reverse osmosis purifies water by desalination.

Memory Aids

  • Osmosis: solvent moves to higher solute concentration.

  • Osmotic pressure = pressure to stop osmosis.

  • Reverse osmosis = water purification method.

Abnormal Molar Masses

Concept Overview

  • Abnormal molar mass occurs when substances associate or dissociate in solution, altering the expected molecular mass.

  • Determined by colligative properties, the observed molar mass differs from theoretical values.

  • van't Hoff factor (i) quantifies this effect:
    i = (Observed colligative property) / (Calculated colligative property) = Mc / Mo

  • Interpretation of i:
    • i < 1 indicates association (fewer particles)
    • i > 1 indicates dissociation (more particles)

  • Modified colligative property equations:
    • Relative lowering of vapor pressure: \\\frac{p_1^\\circ - p_1}{p_1^\\circ} = i \\frac{n_2}{n_1} \
    • Boiling point elevation: \\\Delta T_b = i K_b m \
    • Freezing point depression: \\\Delta T_f = i K_f m \
    • Osmotic pressure: \\\pi = i \\frac{n_2 R T}{V} \

  • Comparison of observed and normal colligative properties:
    • Observed < Normal → Association
    • Observed > Normal → Dissociation

  • For electrolyte AxBy dissociating with degree of dissociation α:
    • Total particles after dissociation: \i = \\alpha (x + y - 1) + 1 \

  • For association of n molecules:
    • Total particles after association: \i = 1 - \\alpha + \\frac{\\alpha}{n} \

Solved Examples

  • Ex 1: Calculate van't Hoff factor for NaCl dissociating completely.
    Solution: NaCl → Na+ + Cl−, total particles = 2
    i = 2 (complete dissociation)

  • Ex 2: A solute shows observed molar mass 60 g/mol, theoretical 90 g/mol.
    Calculate i and identify association/dissociation.
    i = 90/60 = 1.5 > 1 → Dissociation

Practice Set

  • Q1: What is the van't Hoff factor for glucose (non-electrolyte) in solution?
    A) 0.5 B) 1 C) 2 D) 3

  • Q2: If observed freezing point depression is less than calculated, the solute is:
    A) Dissociated B) Associated C) Ionized D) Neutral

  • Q3: Electrolyte A2B dissociates as A2B → 2A+ + B2− with α = 0.6.
    Calculate van't Hoff factor i.
    A) 2.2 B) 2.6 C) 3.0 D) 1.6

Answer Key

  • Q1: B) 1
    Glucose does not dissociate; i = 1.

  • Q2: B) Associated
    Lower observed colligative property indicates association (i < 1).

  • Q3: B) 2.6
    i = α(x + y - 1) + 1 = 0.6(2 + 1 - 1) + 1 = 0.6(2) + 1 = 2.2 + 1 = 2.6

Memory Aids

  • van't Hoff factor i < 1 → Association (particles combine)

  • van't Hoff factor i > 1 → Dissociation (particles split)

  • For electrolyte dissociation: i = α(total ions - 1) + 1

  • For association: i = 1 - α + α/n

Diagram 13 – NEET Chemistry Solutions"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View
Solutions Notes – NEET Chemistry | Prepzy