NEET UG . NEET Chemistry . Chemistry . Haloalkanes and Haloarenes

Chapter 15: Haloalkanes and Haloarenes

Ch 15

NEET Chemistry

NEET UG

"

Introduction


Haloalkanes and Haloarenes



  • Haloalkanes: Alkanes with one or more hydrogens replaced by halogen atoms (-F, -Cl, -Br, -I).

  • Haloarenes: Benzene derivatives where a hydrogen atom is replaced by a halogen; general formula C6H5X.

  • Haloalkanes have halogen attached to sp3 hybridized carbon atoms.

  • Haloarenes have halogen attached to sp2 hybridized carbon atoms of the aromatic ring.

  • Many halogenated organic compounds occur naturally and have clinical uses.


Solved Examples



  • Ex 1: Identify the hybridization of carbon in chloromethane (CH3Cl).
    Step 1: Carbon in methane is sp3 hybridized.
    Step 2: Replacement of H by Cl does not change hybridization.
    Answer: Carbon is sp3 hybridized.

  • Ex 2: Determine if chlorobenzene is a haloalkane or haloarene.
    Step 1: Cl attached to benzene ring carbon (sp2 hybridized).
    Answer: Chlorobenzene is a haloarene.


Practice Set



  • Q1: Which hybridization is present in haloalkanes?
    A. sp
    B. sp2
    C. sp3
    D. sp3d

  • Q2: The general formula of haloarenes is:
    A. CnH2n+1X
    B. C6H5X
    C. CnH2nX
    D. CnH2n-2X

  • Q3: Which of the following is a haloalkane?
    A. Chlorobenzene
    B. Bromoethane
    C. Iodobenzene
    D. Fluorobenzene


Answer Key



  • Q1: C. sp3 - Haloalkanes have halogen attached to sp3 carbon atoms.

  • Q2: B. C6H5X - Haloarenes have halogen substituted on benzene ring.

  • Q3: B. Bromoethane - An alkane derivative with halogen attached to sp3 carbon.


Memory Aids



  • Haloalkanes = Halogen on sp3 carbon (alkane).

  • Haloarenes = Halogen on sp2 carbon (aromatic ring).

  • General formula: Haloalkanes vary; Haloarenes = C6H5X.


Classification


Types of Haloalkanes and Haloarenes


Diagram 1 – NEET Chemistry Haloalkanes and Haloarenes

  • Classified by number of halogen atoms: Mono-, Di-, Tri-halo compounds.

  • Classified by carbon-halogen bond hybridization: sp3 or sp2.

  • Monohalo compounds:

    • sp3 C–X: Alkyl halides (e.g., chloromethane)

    • sp2 C–X: Vinylic halides (e.g., vinyl chloride)



  • Dihalo compounds:

    • sp3 C–X: Allylic halides

    • sp2 C–X: Aryl halides (e.g., dichlorobenzene)



  • Trihalo compounds:

    • sp3 C–X: Benzylic halides (e.g., trichloromethane)




Solved Examples



  • Ex 1: Classify CH2=CHCl.
    Step 1: Halogen attached to sp2 carbon of alkene.
    Answer: Vinylic halide (monohalo, sp2 C–X).

  • Ex 2: Classify CCl3H.
    Step 1: Three halogens attached to sp3 carbon.
    Answer: Trihaloalkane (benzylic halide).


Practice Set



  • Q1: Which is a vinylic halide?
    A. CH3Cl
    B. CH2=CHCl
    C. C6H5Cl
    D. CH2Cl–CH3

  • Q2: Dichlorobenzene is classified as:
    A. Alkyl halide
    B. Allylic halide
    C. Aryl halide
    D. Benzylic halide

  • Q3: Trichloromethane (CHCl3) is an example of:
    A. Monohaloalkane
    B. Dihaloalkane
    C. Trihaloalkane
    D. Haloarene


Answer Key



  • Q1: B. CH2=CHCl - Halogen on sp2 carbon of alkene (vinylic halide).

  • Q2: C. Aryl halide - Halogen attached to aromatic ring carbon.

  • Q3: C. Trihaloalkane - Three halogens on sp3 carbon.


Memory Aids



  • Mono = one halogen; Di = two; Tri = three halogens.

  • sp3 C–X: Alkyl, allylic, benzylic halides.

  • sp2 C–X: Vinylic and aryl halides.

  • Benzylic halides have halogen on carbon adjacent to aromatic ring.



Nomenclature


Common and IUPAC Naming of Alkyl Halides



  • Common names: Alkyl group name + halide (e.g., ethyl bromide).

  • IUPAC names: Halosubstituted hydrocarbons (e.g., bromoethane).

  • Monohalogen benzene derivatives: Common and IUPAC names are identical.

  • Dihalogen benzene derivatives:

    • Common: Use prefixes o- (ortho), m- (meta), p- (para).

    • IUPAC: Use numbers 1,2-; 1,3-; 1,4- to indicate positions.




Diagram 2 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Name CH3CH2Br

    • Common: Ethyl bromide

    • IUPAC: Bromoethane



  • Ex 2: Name C6H4Br2 with bromines at 1,4 positions

    • Common: p-Dibromobenzene

    • IUPAC: 1,4-Dibromobenzene




Practice Set



  • Q1: What is the IUPAC name of CH3CH2Cl?

    • A. Ethyl chloride

    • B. Chloroethane

    • C. Ethane chloride

    • D. Chloromethane



  • Q2: The common name for 1,3-dibromobenzene is:

    • A. o-Dibromobenzene

    • B. m-Dibromobenzene

    • C. p-Dibromobenzene

    • D. 3,5-Dibromobenzene



  • Q3: Which is the correct IUPAC name for CH3C6H4Br with Br at position 2?

    • A. 2-Bromotoluene

    • B. o-Bromotoluene

    • C. Bromobenzene

    • D. 1-Bromotoluene




Answer Key



  • Q1: B - Chloroethane is the correct IUPAC name; common name is ethyl chloride.

  • Q2: B - m-Dibromobenzene corresponds to 1,3-dibromobenzene.

  • Q3: A - 2-Bromotoluene is the correct IUPAC name indicating bromine at position 2.


Memory Aids



  • o-, m-, p- prefixes correspond to 1,2-; 1,3-; 1,4- positions on benzene ring.

  • Common name = Alkyl group + halide; IUPAC = Halosubstituted hydrocarbon.


Dihaloalkanes


Classification and Naming



  • Dihaloalkanes contain two halogen atoms of the same type.

  • Common names:

    • Geminal (gem-) dihalides: Both halogens on the same carbon; called alkylidene halides.

    • Vicinal (vic-) dihalides: Halogens on adjacent carbons; called alkylene dihalides.



  • IUPAC names: Both types named as dihaloalkanes with position numbers (e.g., 1,1-dichloroethane, 1,2-dichloroethane).


Diagram 3 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Name CH3CHCl2

    • Common: Ethylidene chloride (geminal)

    • IUPAC: 1,1-Dichloroethane



  • Ex 2: Name CH2ClCH2Cl

    • Common: Ethylene dichloride (vicinal)

    • IUPAC: 1,2-Dichloroethane




Practice Set



  • Q1: What is the common name for 1,1-dibromoethane?

    • A. Ethylene dibromide

    • B. Ethylidene dibromide

    • C. Ethane dibromide

    • D. Ethyl dibromide



  • Q2: Which compound is a vicinal dihalide?

    • A. 1,1-Dichloropropane

    • B. 1,2-Dichloropropane

    • C. 2,2-Dichloropropane

    • D. 3,3-Dichloropropane



  • Q3: Identify the IUPAC name of ethylene dichloride.

    • A. 1,1-Dichloroethane

    • B. 1,2-Dichloroethane

    • C. 2,2-Dichloroethane

    • D. 1,3-Dichloroethane




Answer Key



  • Q1: B - Ethylidene dibromide is the common name for 1,1-dibromoethane (geminal).

  • Q2: B - 1,2-Dichloropropane is vicinal (halogens on adjacent carbons).

  • Q3: B - 1,2-Dichloroethane is the IUPAC name for ethylene dichloride (vicinal).


Memory Aids



  • Geminal = same carbon (alkylidene halide); Vicinal = adjacent carbons (alkylene dihalide).

  • IUPAC uses numbering to specify halogen positions precisely.



Nature of C — X Bond


Bond Polarity and Electronegativity



  • Halogen atoms (X) are more electronegative than carbon (C).

  • Carbon-halogen bond is polar covalent.

  • Carbon atom carries partial positive charge (δ+).

  • Halogen atom carries partial negative charge (δ−).

  • Electron density shifts from carbon to halogen.


Diagram 4 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Identify the polarity in CH3Cl.

    • Cl is more electronegative than C.

    • Bond is polar with C δ+ and Cl δ−.




Practice Set



  • Q1: Which atom in alkyl halide carries partial positive charge?

    • A) Halogen

    • B) Carbon

    • C) Hydrogen

    • D) Oxygen



  • Q2: The polarity of C—X bond arises due to:

    • A) Equal electronegativity

    • B) Halogen more electronegative than carbon

    • C) Carbon more electronegative than halogen

    • D) Ionic bond formation



  • Q3: In CH3Br, the partial charges are:

    • A) C δ−, Br δ+

    • B) C δ+, Br δ−

    • C) Both neutral

    • D) Both positive




Answer Key



  • Q1: B — Carbon carries partial positive charge due to lower electronegativity.

  • Q2: B — Halogen is more electronegative, causing bond polarity.

  • Q3: B — Carbon is δ+ and bromine is δ− in polar bond.


Memory Aids



  • Remember: \"Electronegativity difference causes polarity\".

  • Halogen atoms pull electron density towards themselves.

  • Carbon always δ+ in C—X bond.


Bond Length and Enthalpy


Trend with Halogen Size



  • Bond length increases with halogen size: F < Cl < Br < I.

  • Bond enthalpy decreases as bond length increases.

  • Shorter bonds are stronger; longer bonds are weaker.

  • Example: C—F bond length = 139 pm, enthalpy = 452 kJ/mol.

  • C—I bond length = 214 pm, enthalpy = 234 kJ/mol.


Diagram 5 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Compare bond strength of C—Cl and C—I.

    • C—Cl bond is shorter and stronger than C—I bond.




Practice Set



  • Q1: Which bond has the highest bond enthalpy?

    • A) C—F

    • B) C—Cl

    • C) C—Br

    • D) C—I



  • Q2: As halogen size increases, bond length:

    • A) Decreases

    • B) Increases

    • C) Remains same

    • D) Varies irregularly



  • Q3: Which bond is weakest?

    • A) C—F

    • B) C—Cl

    • C) C—Br

    • D) C—I




Answer Key



  • Q1: A — C—F bond has highest bond enthalpy (452 kJ/mol).

  • Q2: B — Bond length increases with halogen size.

  • Q3: D — C—I bond is weakest due to longest bond length.


Memory Aids



  • Bond length ↑ → Bond enthalpy ↓

  • Fluorine forms shortest, strongest bonds.

  • Iodine forms longest, weakest bonds.


Dipole Moment Trends


Variation from F to I



  • Dipole moment depends on bond polarity and bond length.

  • Electronegativity decreases from F to I.

  • Bond length increases from F to I.

  • Dipole moments vary irregularly due to opposing effects.

  • Example values (Debye): CH3F (1.85), CH3Cl (1.86), CH3Br (1.75), CH3I (1.55).


Diagram 6 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Explain why CH3Cl has higher dipole moment than CH3F.

    • CH3Cl has longer bond length compensating lower electronegativity difference.




Practice Set



  • Q1: Dipole moment is a measure of:

    • A) Bond length only

    • B) Charge separation in molecule

    • C) Molecular weight

    • D) Number of bonds



  • Q2: Which molecule has highest dipole moment?

    • A) CH3F

    • B) CH3Cl

    • C) CH3Br

    • D) CH3I



  • Q3: Dipole moment variation from F to I is:

    • A) Regular increase

    • B) Regular decrease

    • C) Irregular due to size and electronegativity

    • D) Constant




Answer Key



  • Q1: B — Dipole moment measures charge separation.

  • Q2: B — CH3Cl has highest dipole moment (1.860 D).

  • Q3: C — Variation is irregular due to opposing factors.


Memory Aids



  • Dipole moment = Electronegativity difference × Bond length.

  • Opposite trends of size and electronegativity cause irregular dipole moments.

  • CH3Cl shows maximum dipole moment among alkyl halides.



Methods of Preparation of Haloalkanes


From Alcohols



  • Primary and secondary alcohols react with HCl in presence of ZnCl2 catalyst to form alkyl chlorides.

  • Tertiary alcohols react with concentrated HCl by simple shaking at room temperature.

  • Alkyl bromides are prepared by reacting alcohols with NaBr and H2SO4.

  • Phosphorus halides (PX3, X = Cl, Br) convert alcohols to alkyl halides (R–X).

  • Red phosphorus with halogens (Br2, I2) also converts alcohols to alkyl halides.

  • Other reagents: PCl5, SOCl2 with pyridine convert alcohols to alkyl chlorides.

  • Good yields of alkyl iodides (R–I) obtained by heating alcohols with NaI or KI in 95% ortho phosphoric acid.

  • Reactivity order with haloacid: tertiary > secondary > primary alcohols.


Diagram 7 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Convert 2° alcohol to alkyl chloride using HCl and ZnCl2.

  • Step 1: Mix 2° alcohol with HCl and anhydrous ZnCl2.

  • Step 2: Reaction proceeds via SN1/SN2 mechanism forming alkyl chloride.


Practice Set



  • Q1: Which reagent converts tertiary alcohol to alkyl chloride at room temperature?
    A. HCl + ZnCl2
    B. Concentrated HCl
    C. NaBr + H2SO4
    D. PCl5

  • Q2: Which reagent is used to prepare alkyl bromide from alcohol?
    A. NaI + H3PO4
    B. NaBr + H2SO4
    C. SOCl2 + pyridine
    D. HCl + ZnCl2

  • Q3: Order of reactivity of alcohols with haloacid is:
    A. 1° > 2° > 3°
    B. 3° > 2° > 1°
    C. 2° > 3° > 1°
    D. 1° > 3° > 2°


Answer Key



  • Q1: B - Tertiary alcohols react with concentrated HCl directly at room temperature.

  • Q2: B - NaBr with H2SO4 converts alcohols to alkyl bromides.

  • Q3: B - Reactivity order is tertiary > secondary > primary alcohols.


Memory Aids



  • Use ZnCl2 catalyst for 1° and 2° alcohols with HCl.

  • Tertiary alcohols react directly with concentrated HCl.

  • Phosphorus halides (PX3) are versatile for halide formation.


From Hydrocarbons


Free Radical Halogenation



  • Methane reacts with Cl2 under UV light or heat to form chloromethanes.

  • Chlorine splits into radicals initiating substitution of H by Cl.

  • Products: CH3Cl, CH2Cl2, CHCl3, CCl4 plus HCl byproduct.

  • Ease of H replacement: tertiary > secondary > primary.


Diagram 8 – NEET Chemistry Haloalkanes and Haloarenes

Addition to Alkenes



  • Alkenes react with HX (X = Cl, Br, I) adding across double bond.

  • Markovnikov's rule: H adds to carbon with more H, halogen to carbon with fewer H.

  • In presence of peroxide, HBr adds via Anti-Markovnikov rule.

  • Halogens (Br2) add to alkenes forming vicinal dihalides.


Diagram 9 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Chlorination of methane under UV light.

  • Step 1: UV light splits Cl2 into radicals.

  • Step 2: Cl radicals replace H atoms in methane stepwise.

  • Ex 2: Addition of HBr to propene in presence of peroxide.

  • Step 1: Peroxide initiates radical addition.

  • Step 2: Br adds to less substituted carbon (Anti-Markovnikov).


Practice Set



  • Q1: Which condition initiates free radical halogenation?
    A. Heat or UV light
    B. Acid catalyst
    C. Base catalyst
    D. High pressure

  • Q2: In addition of HBr to alkene with peroxide, halogen adds to:
    A. More substituted carbon
    B. Less substituted carbon
    C. Both carbons equally
    D. No addition occurs

  • Q3: Order of ease of H abstraction by Br2 at 400 K is:
    A. 1° > 2° > 3°
    B. 3° > 2° > 1°
    C. 2° > 3° > 1°
    D. Equal for all


Answer Key



  • Q1: A - Heat or UV light initiates radical formation.

  • Q2: B - Peroxide causes Anti-Markovnikov addition; halogen adds to less substituted carbon.

  • Q3: B - Br2 abstracts 3° H fastest, then 2°, then 1°.


Memory Aids



  • Free radical halogenation needs UV or heat.

  • Markovnikov addition: halogen to more substituted carbon.

  • Peroxide effect reverses Markovnikov rule for HBr.


Halogen Exchange


Finkelstein Reaction



  • Alkyl halide (R–X, X = Cl or Br) reacts with NaI in dry acetone.

  • NaI replaces Cl or Br with I forming alkyl iodide (R–I).

  • NaCl or NaBr precipitates out, driving reaction forward (Le Chatelier’s principle).


Diagram 10 – NEET Chemistry Haloalkanes and Haloarenes

Swarts Reaction



  • Alkyl halide (R–X, X = Cl or Br) reacts with AgF to form alkyl fluoride (R–F).

  • Silver halide (AgX) precipitates as byproduct.

  • Other reagents: HgF2, CoF3, SbF5 can also be used.


Diagram 11 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Convert R–Cl to R–I using NaI in dry acetone.

  • Step 1: Mix R–Cl with NaI in dry acetone.

  • Step 2: R–I forms; NaCl precipitates out.

  • Ex 2: Prepare alkyl fluoride from R–Br using AgF.

  • Step 1: React R–Br with AgF.

  • Step 2: R–F forms; AgBr precipitates.


Practice Set



  • Q1: In Finkelstein reaction, solvent used is:
    A. Water
    B. Dry acetone
    C. Ethanol
    D. Benzene

  • Q2: Swarts reaction replaces halogen with:
    A. Chlorine
    B. Bromine
    C. Fluorine
    D. Iodine

  • Q3: Which salt precipitates in Finkelstein reaction?
    A. NaI
    B. NaCl or NaBr
    C. AgX
    D. KI


Answer Key



  • Q1: B - Dry acetone is used to precipitate NaCl/NaBr.

  • Q2: C - Swarts reaction replaces Cl or Br with fluorine.

  • Q3: B - NaCl or NaBr precipitates, driving reaction forward.


Memory Aids



  • Finkelstein: Halogen exchange using NaI in dry acetone.

  • Swarts: Halogen replaced by fluorine using AgF.

  • Precipitation of salt drives equilibrium forward.



Preparation of Haloarenes


From Hydrocarbons by Electrophilic Substitution



  • Aryl chlorides and bromides are prepared by electrophilic substitution of arenes with Cl2 or Br2.

  • Lewis acid catalysts like Fe or FeCl3 are used to activate halogens.

  • Reaction occurs in dark to prevent side reactions.

  • Example: Toluene reacts with X2 (Cl2/Br2) + Fe catalyst to give ortho- and para-halotoluene.

  • Ortho- and para-isomers differ in melting points, allowing easy separation.

  • Iodination is reversible; requires oxidising agents (HNO3, HIO4) to oxidise HI formed.

  • Fluoro compounds are not prepared by this method due to fluorine's high reactivity.


Diagram 12 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Toluene + Br2 / Fe → o-bromotoluene + p-bromotoluene

  • Step 1: Fe activates Br2 forming Br+.

  • Step 2: Electrophilic substitution at ortho and para positions relative to CH3.

  • Step 3: Products separated by melting point difference.


Practice Set



  • Q1: Which catalyst is used for electrophilic halogenation of benzene?

    A. FeCl3 B. AlCl3 C. Cu D. Zn

  • Q2: Why are fluoroarenes not prepared by direct halogenation?

    A. Low reactivity B. High reactivity of F2 C. No catalyst D. Fluorine is inert

  • Q3: Which oxidising agent is used to oxidise HI during iodination?

    A. HNO3 B. H2SO4 C. HCl D. NaOH


Answer Key



  • Q1: A. FeCl3 - Lewis acid catalyst activates halogen for electrophilic substitution.

  • Q2: B. High reactivity of F2 - Fluorine reacts violently, unsuitable for direct halogenation.

  • Q3: A. HNO3 - Strong oxidising agent to convert HI back to I2.


Memory Aids



  • FeCl3 activates Cl2/Br2 for aromatic substitution.

  • Toluene directs halogenation to ortho and para positions.

  • Iodination needs oxidising agent to prevent reversal.

  • Fluorine too reactive for direct aromatic substitution.


From Benzene Diazonium Chloride


Key Reactions Using Benzene Diazonium Chloride



  • Start with aniline (C6H5–NH2).

  • React with NaNO2 and HCl at 273–278 K to form benzene diazonium chloride (C6H5–N2+Cl−).

  • Balz-Schiemann reaction: Benzene diazonium chloride + NaNO2 + HBF4 → Fluorobenzene + N2 + BF3.

  • Sandmeyer's reaction: Benzene diazonium chloride + CuCl + HCl → Chlorobenzene + N2 + CuCl2.

  • Similarly, with CuBr + HBr → Bromobenzene + N2.

  • These reactions replace –NH2 with halogens or fluorine on benzene.


Diagram 13 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Preparation of chlorobenzene from aniline

  • Step 1: Aniline + NaNO2 + HCl (273 K) → Benzene diazonium chloride

  • Step 2: Benzene diazonium chloride + CuCl + HCl → Chlorobenzene + N2


Practice Set



  • Q1: What is the temperature range for diazotization?

    A. 273–278 K B. 300–310 K C. 250–260 K D. 280–290 K

  • Q2: Which reagent is used in Balz-Schiemann reaction?

    A. HBF4 B. HCl C. HBr D. HNO3

  • Q3: What is the gaseous product released in Sandmeyer's reaction?

    A. CO2 B. N2 C. H2 D. O2


Answer Key



  • Q1: A. 273–278 K - Low temperature needed to stabilize diazonium salt.

  • Q2: A. HBF4 - Used to form fluorobenzene in Balz-Schiemann reaction.

  • Q3: B. N2 - Nitrogen gas is released during Sandmeyer's reaction.


Memory Aids



  • Diazotization at low temperature (273–278 K) forms diazonium salt.

  • Balz-Schiemann reaction replaces –N2+ with F.

  • Sandmeyer's reaction replaces –N2+ with Cl or Br using Cu salts.

  • Nitrogen gas (N2) is always released in these reactions.



Physical Properties


General Characteristics



  • Pure alkyl halides are colourless; bromides and iodides develop colour on light exposure.

  • Many volatile halogen compounds have a sweet smell.

  • Methyl chloride, methyl bromide, ethyl chloride, and some chlorofluoromethanes are gases at room temperature; higher members are liquids or solids.


Boiling Points and Intermolecular Forces



  • Halogen derivatives have stronger dipole-dipole and van der Waals forces than parent hydrocarbons due to polarity and higher molecular mass.

  • Boiling points of alkyl halides are higher than hydrocarbons of similar molecular mass.

  • For the same alkyl group, boiling points decrease in order: RI > RBr > RCl > RF due to increasing van der Waals forces with halogen size.

  • Boiling points of isomeric haloalkanes decrease with increased branching.

  • Isomeric dihalobenzenes have nearly same boiling points; para-isomers have higher melting points due to better crystal lattice symmetry.


Density and Solubility



  • Bromo, iodo, and polychloro derivatives are heavier than water; density increases with more carbon atoms, halogen atoms, and heavier halogens.

  • Example densities (g mL−1): n-C3H7Cl = 0.89, n-C3H7Br = 1.335, n-C3H7I = 1.747.

  • Haloalkanes are very slightly soluble in water but more soluble in organic solvents due to similar intermolecular attractions.


Photochemical Decomposition of Alkyl Iodides



  • Alkyl iodides become violet or brown on standing due to weak C–I bond breaking under sunlight.

  • Photochemical reaction: 2R–I \u00021hv\u00021 R–R + I2

  • Liberated iodine dissolves in alkyl iodide, imparting a dark colour.


Diagram 14 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Arrange the boiling points of CH3Cl, CH3Br, and CH3I.

  • Step 1: Identify halogen size and mass: I > Br > Cl.

  • Step 2: Boiling points increase with halogen size due to van der Waals forces.

  • Answer: CH3I > CH3Br > CH3Cl.

  • Ex 2: Explain why para-dihalobenzenes have higher melting points than ortho- and meta-isomers.

  • Step 1: Para-isomers are more symmetrical.

  • Step 2: Symmetry allows better packing in crystal lattice.

  • Answer: Higher melting points due to better lattice fitting.


Practice Set



  • Q1: Which alkyl halide is a gas at room temperature?

    • A. n-Butyl chloride

    • B. Methyl bromide

    • C. Ethyl iodide

    • D. Propyl chloride



  • Q2: Order the boiling points of the following: CH3Cl, CH3Br, CH3I, CH3F.

    • A. CH3F < CH3Cl < CH3Br < CH3I

    • B. CH3I < CH3Br < CH3Cl < CH3F

    • C. CH3Cl < CH3F < CH3Br < CH3I

    • D. CH3Br < CH3Cl < CH3F < CH3I



  • Q3: What causes the violet/brown colour in aged alkyl iodides?

    • A. Formation of alkyl radicals

    • B. Dissolved iodine from photochemical decomposition

    • C. Reaction with water

    • D. Oxidation by air




Answer Key



  • Q1: B. Methyl bromide is a gas at room temperature due to low molecular weight.

  • Q2: A. Boiling points increase with halogen size: F < Cl < Br < I.

  • Q3: B. Violet/brown colour is due to iodine formed by photochemical decomposition dissolving in alkyl iodide.


Memory Aids



  • Boiling point order: RI > RBr > RCl > RF (increasing van der Waals forces).

  • Para-isomers have higher melting points due to symmetry and better crystal packing.

  • Alkyl iodides decompose under light: 2R–I \u00021hv\u00021 R–R + I2, causing colour change.



Chemical Reactions


Reactions of Haloalkanes



  • Haloalkane reactions: (i) Nucleophilic substitution (ii) Elimination (iii) Reaction with metals


Nucleophilic Substitution Reactions


Key Points



  • C–X bond is highly polar due to electronegativity difference; polarity decreases F > Cl > Br > I.

  • Polarity causes nucleophilic substitution reactions.

  • Ambident nucleophiles (e.g., CN–, NO2–) can attack through different atoms, forming different products.

  • Two mechanisms: SN1 (unimolecular) and SN2 (bimolecular).

  • SN1: two-step, carbocation intermediate, rate depends on carbocation stability, weak nucleophiles preferred, racemization occurs.

  • SN2: one-step, nucleophile attacks opposite leaving group, rate depends on steric hindrance, strong nucleophiles preferred, inversion of configuration.

  • Reactivity order: R–I > R–Br > R–Cl > R–F.

  • Primary allylic and benzylic halides show higher SN1 reactivity due to resonance stabilization.


Solved Examples



  • Ex 1: SN2 reaction of CH3Br with OH– gives CH3OH with inversion of configuration.

  • Ex 2: SN1 reaction of (CH3)3CBr forms carbocation intermediate, then reacts with H2O to give (CH3)3COH racemic mixture.


Practice Set



  • Q1: Which halide undergoes SN1 fastest? A) CH3Cl B) (CH3)3CBr C) CH3Br D) C6H5Cl

  • Q2: In SN2 reaction, nucleophile attacks from: A) Same side as leaving group B) Opposite side C) Any side D) No attack

  • Q3: Ambident nucleophile CN– can form: A) Alkyl cyanide B) Alkyl isocyanide C) Both A and B D) None


Answer Key



  • Q1: B; tertiary halides form stable carbocations, favoring SN1.

  • Q2: B; SN2 involves backside attack causing inversion.

  • Q3: C; CN– attacks via C or N forming cyanides or isocyanides.


Memory Aids



  • SN1: 1 step rate, carbocation intermediate, racemization.

  • SN2: 2 molecules rate, backside attack, inversion.

  • Reactivity order: I > Br > Cl > F.

  • Ambident nucleophiles attack via different atoms.


Elimination Reactions


Key Points



  • Haloalkanes with β-hydrogen undergo dehydrohalogenation with alcoholic KOH on heating.

  • Elimination removes H from β-carbon and halogen from α-carbon forming alkene.

  • Saytzeff’s rule: major alkene has maximum alkyl substitution.


Diagram 15 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: 2-Bromobutane + alc. KOH → major: 2-butene, minor: 1-butene.


Practice Set



  • Q1: Product of elimination from 2-chloropropane with alc. KOH? A) Propene B) Propane C) Propan-2-ol D) No reaction

  • Q2: According to Saytzeff’s rule, major product is the alkene with: A) Least alkyl groups B) Most alkyl groups C) No double bond D) Triple bond

  • Q3: Which reagent favors elimination over substitution? A) Dilute KOH B) Alc. KOH C) H2SO4 D) NaCl


Answer Key



  • Q1: A; elimination forms propene.

  • Q2: B; more substituted alkene is major.

  • Q3: B; alcoholic KOH favors elimination.


Memory Aids



  • Elimination: β-H and halogen removed, forms alkene.

  • Saytzeff’s rule: major alkene = most substituted.

  • Alc. KOH → elimination; aq. KOH → substitution.


Reactions with Metals


Key Points



  • R–X + Mg (dry ether) → R–MgX (Grignard reagent).

  • R–X + Li (dry ether) → R–Li (organolithium compound).

  • 2 R–X + 2 Na (dry ether) → R–R + 2 NaX (Wurtz reaction).

  • Grignard reagents react with proton donors to form hydrocarbons.


Solved Examples



  • Ex 1: C2H5Br + Mg → C2H5MgBr (Grignard reagent).

  • Ex 2: 2 C2H5Br + 2 Na → C4H10 + 2 NaBr (Wurtz reaction).


Practice Set



  • Q1: Grignard reagent is formed by reaction of alkyl halide with: A) Na B) Mg C) Li D) K

  • Q2: Wurtz reaction joins: A) Two alkyl halides B) Alkyl halide and metal C) Two metals D) Alkyl halide and water

  • Q3: Organolithium compounds are formed by reaction of alkyl halide with: A) Li B) Na C) Mg D) K


Answer Key



  • Q1: B; Grignard reagents form with Mg.

  • Q2: A; Wurtz reaction couples two alkyl halides.

  • Q3: A; organolithium formed with Li.


Memory Aids



  • Grignard: R–X + Mg → R–MgX.

  • Wurtz: 2 R–X + 2 Na → R–R + 2 NaX.

  • Organolithium: R–X + Li → R–Li.


Nucleophilic Substitution in Haloarenes


Key Points



  • Haloarenes less reactive than haloalkanes due to partial double bond character of C–X bond (resonance).

  • C–X bond less polar; sp2 carbon more electronegative than sp3.

  • Phenyl cation unstable; SN1 mechanism not favored.

  • Electron-rich nucleophiles repel electron-rich aromatic ring.

  • Replacement of Cl by OH requires harsh conditions (NaOH, 623 K, 300 atm).

  • Electron withdrawing groups (-NO2) at ortho/para increase reactivity.


Diagram 16 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Chlorobenzene + NaOH (623 K, 300 atm) → Phenol.

  • Ex 2: 2,4-Dinitrochlorobenzene + NaOH → 2,4-Dinitrophenol.


Practice Set



  • Q1: Why are haloarenes less reactive in nucleophilic substitution? A) Strong C–X bond B) Resonance stabilization C) Less polar bond D) All

  • Q2: Replacement of Cl by OH in chlorobenzene requires: A) Room temp B) High temp and pressure C) Acidic medium D) No reaction

  • Q3: Electron withdrawing groups on haloarenes: A) Decrease reactivity B) Increase reactivity C) No effect D) Make it explosive


Answer Key



  • Q1: D; all factors reduce reactivity.

  • Q2: B; harsh conditions needed.

  • Q3: B; increase reactivity by stabilizing intermediate.


Memory Aids



  • Haloarenes: C–X bond partial double bond, less reactive.

  • OH substitution needs harsh conditions.

  • -NO2 groups increase reactivity.


Electrophilic Substitution in Haloarenes


Key Points



  • Halogen's inductive effect (–I) decreases electron density; haloarenes less reactive than benzene.

  • Halogen's resonance effect (+M) increases electron density at ortho and para positions.

  • Haloarenes are deactivating but ortho/para directing.

  • Halogenation with Cl2/FeCl3 gives dihalobenzenes (major para, minor ortho).

  • Nitration with conc. HNO3/H2SO4 gives o- and p-halonitrobenzenes.

  • Sulphonation with conc. H2SO4 gives o- and p-halo benzene sulfonic acids.

  • Friedel-Crafts alkylation/acylation gives o- and p-haloalkyl/acetophenones.


Diagram 17 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Chlorobenzene + Cl2/FeCl3 → 1,4-Dichlorobenzene (major) + 1,2-Dichlorobenzene (minor).

  • Ex 2: Chlorobenzene + HNO3/H2SO4 → 1-chloro-4-nitrobenzene (major) + 1-chloro-2-nitrobenzene (minor).

  • Ex 3: Chlorobenzene + CH3Cl/AlCl3 → 1-chloro-4-methylbenzene (major) + 1-chloro-2-methylbenzene (minor).


Practice Set



  • Q1: Halogens in haloarenes are: A) Activating B) Deactivating C) Neutral D) Explosive

  • Q2: Major product in chlorobenzene nitration is: A) Ortho B) Meta C) Para D) None

  • Q3: Friedel-Crafts alkylation of chlorobenzene gives: A) Meta product B) Ortho and para products C) Only para D) No reaction


Answer Key



  • Q1: B; halogens deactivate benzene ring.

  • Q2: C; para product is major due to sterics.

  • Q3: B; both ortho and para products formed.


Memory Aids



  • Halogens: –I effect deactivates, +M effect ortho/para directs.

  • Electrophilic substitution: major para product.

  • Friedel-Crafts: ortho/para substitution.



Polyhalogen Compounds


Definition and Examples



  • Carbon compounds containing more than one halogen atom.

  • Examples: CHCl3 (Chloroform), CH2Cl2 (Dichloromethane).


Solved Examples



  • Ex 1: Identify the halogen atoms in CHI3.
    Answer: Iodine atoms (3 atoms).


Practice Set



  • Q1: Which of the following is a polyhalogen compound?

    A. CH4

    B. CHCl3

    C. C2H6

    D. C2H5OH

  • Q2: Polyhalogen compounds contain how many halogen atoms?

    A. One

    B. Two or more

    C. None

    D. Only fluorine

  • Q3: Which of the following is NOT a polyhalogen compound?

    A. CCl4

    B. CHBr3

    C. CH3Cl

    D. CF2Cl2


Answer Key



  • Q1: B - CHCl3 contains multiple halogen atoms.

  • Q2: B - Polyhalogen compounds have two or more halogen atoms.

  • Q3: C - CH3Cl has only one halogen atom, not polyhalogen.


Memory Aids



  • Polyhalogen = multiple halogen atoms attached to carbon.

  • Common halogens: Cl, Br, I, F.

  • Look for compounds with 2 or more halogen atoms for polyhalogen.



Dichloromethane (Methylene Chloride), CH2Cl2


Uses



  • Widely used as a solvent.

  • Used as a paint remover.

  • Used as a propellant in aerosol sprays.


Harmful Effects



  • Harms the human central nervous system.

  • Low exposure causes slight hearing and vision impairment.

  • High exposure causes dizziness, nausea, tingling, numbness in fingers and toes.

  • Direct skin contact causes burning and redness.

  • Contact with eyes can burn the cornea.


Solved Examples



  • Ex 1: Name one use of CH2Cl2.
    Answer: Solvent or paint remover.


Practice Set



  • Q1: What is a common use of dichloromethane?

    A. Fuel

    B. Solvent

    C. Food additive

    D. Fertilizer

  • Q2: Which system does CH2Cl2 harm?

    A. Digestive

    B. Central nervous

    C. Respiratory

    D. Circulatory

  • Q3: What effect does high exposure to CH2Cl2 cause?

    A. Improved vision

    B. Dizziness and numbness

    C. Increased appetite

    D. Skin whitening


Answer Key



  • Q1: B - Dichloromethane is widely used as a solvent.

  • Q2: B - It harms the central nervous system.

  • Q3: B - High exposure causes dizziness and numbness.


Memory Aids



  • CH2Cl2 = solvent + paint remover + aerosol propellant.

  • Harmful to CNS; watch for dizziness and skin burns.



Trichloromethane (Chloroform), CHCl3


Uses



  • Major use: production of freon refrigerant R-22.

  • Solvent for resins, rubbers, oils, fats, alkaloids, iodine.

  • Used in preparation of chloretone (drug) and chloropicrin (insecticide).

  • Used to preserve anatomical specimens.


Harmful Effects



  • Oxidised to phosgene (COCl2), a poisonous gas causing liver and kidney damage.

  • Inhaling vapours depresses central nervous system causing dizziness, fatigue, headache.


Diagram 18 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Write the reaction of chloroform with oxygen under light.
    Answer: 2 CHCl3 + O2 \u00021hv\u00021 2 COCl2 + 2 HCl


Practice Set



  • Q1: What is the major use of chloroform?

    A. Fuel

    B. Refrigerant production

    C. Food preservative

    D. Fertilizer

  • Q2: Phosgene gas formed from chloroform causes damage to?

    A. Heart

    B. Liver and kidney

    C. Lungs

    D. Brain

  • Q3: Which of the following is a photochemical reaction?

    A. CHCl3 + O2 \u00021hv\u00021 COCl2 + HCl

    B. CH4 combustion

    C. NaCl dissolution

    D. H2O electrolysis


Answer Key



  • Q1: B - Chloroform is used to produce freon refrigerant R-22.

  • Q2: B - Phosgene causes liver and kidney damage.

  • Q3: A - Chloroform oxidation under light is a photochemical reaction.


Memory Aids



  • Chloroform \u00021hv\u00021 phosgene + HCl (toxic).

  • Used in refrigerant production and solvents.



Triiodomethane (Iodoform), CHI3


Uses



  • Used as antiseptic in wound dressing (liberates iodine).

  • Used as methylating agent in organic synthesis.

  • Replaced due to objectionable smell by other iodine formulations.


Solved Examples



  • Ex 1: Why is iodoform replaced in antiseptics?
    Answer: Due to its bad smell.


Practice Set



  • Q1: Iodoform is mainly used as?

    A. Solvent

    B. Antiseptic

    C. Fuel

    D. Fertilizer

  • Q2: Iodoform liberates which element for antiseptic action?

    A. Chlorine

    B. Iodine

    C. Fluorine

    D. Bromine

  • Q3: Why is iodoform replaced in medical use?

    A. Toxicity

    B. Objectionable smell

    C. Expensive

    D. Unstable


Answer Key



  • Q1: B - Used as antiseptic.

  • Q2: B - Liberates iodine.

  • Q3: B - Replaced due to bad smell.


Memory Aids



  • Iodoform = antiseptic with iodine release.

  • Smell is main drawback.



Tetrachloromethane (Carbon Tetrachloride), CCl4


Uses



  • Manufacture of refrigerants and aerosol propellants.

  • Synthesis of chlorofluorocarbons and pharmaceuticals.

  • Used as cleaning agent and spot remover.

  • Used as fire extinguisher (pyrene).


Harmful Effects



  • Causes liver cancer in humans.

  • Common effects: dizziness, nausea, vomiting.

  • Can cause permanent nerve damage leading to coma or death.

  • May irritate eyes.

  • Depletes ozone layer.


Solved Examples



  • Ex 1: Name a use of CCl4 in fire safety.
    Answer: Fire extinguisher (pyrene).


Practice Set



  • Q1: Carbon tetrachloride is used as?

    A. Food additive

    B. Fire extinguisher

    C. Fertilizer

    D. Fuel

  • Q2: Which organ is mainly affected by CCl4 toxicity?

    A. Heart

    B. Liver

    C. Brain

    D. Lungs

  • Q3: What environmental harm does CCl4 cause?

    A. Acid rain

    B. Ozone depletion

    C. Global warming

    D. Water pollution


Answer Key



  • Q1: B - Used as fire extinguisher.

  • Q2: B - Causes liver cancer.

  • Q3: B - Depletes ozone layer.


Memory Aids



  • CCl4 = fire extinguisher + liver toxin + ozone depleter.

  • Watch for dizziness and nerve damage symptoms.



Freons


Definition and Preparation



  • Chlorofluorocarbon compounds of methane and ethane with chlorine and fluorine.

  • Example: CF2Cl2 (Freon-12).

  • Prepared by Swarts reaction: CCl4 + 2 AgF2 \u00021\u00021 CCl2F2 + 2 AgCl.


Properties and Uses



  • Extremely stable, unreactive, non-toxic, non-corrosive gases.

  • Easily liquefiable.

  • Used as aerosol propellants, refrigerants, and in air conditioning.


Harmful Effects



  • Stable freons diffuse unchanged into stratosphere.

  • Initiate free radical chain reactions with ozone, causing ozone layer depletion.


Solved Examples



  • Ex 1: Write the Swarts reaction for Freon-12.
    Answer: CCl4 + 2 AgF2 \u00021\u00021 CCl2F2 + 2 AgCl


Practice Set



  • Q1: Freons are mainly used as?

    A. Fertilizers

    B. Refrigerants

    C. Fuels

    D. Solvents

  • Q2: Freons cause environmental harm by?

    A. Acid rain

    B. Ozone depletion

    C. Water pollution

    D. Soil erosion

  • Q3: Which reaction is used to prepare Freon-12?

    A. Swarts reaction

    B. Wurtz reaction

    C. Friedel-Crafts

    D. Cannizzaro


Answer Key



  • Q1: B - Used as refrigerants.

  • Q2: B - Cause ozone layer depletion.

  • Q3: A - Prepared by Swarts reaction.


Memory Aids



  • Freons = stable CFCs used in cooling.

  • Swarts reaction replaces Cl with F.

  • Environmental hazard: ozone depletion.



p, p’-Dichlorodiphenyl Trichloroethane (DDT)


Preparation and Properties



  • Prepared by condensation of chloral with chlorobenzene in presence of conc. H2SO4.

  • Powerful insecticide effective against mosquitoes and lice.


Harmful Effects



  • Insects have developed resistance to DDT.

  • Highly toxic to fish.

  • Chemically stable and fat soluble.

  • Not rapidly metabolised; accumulates in fatty tissues.

  • Bioaccumulation leads to increased concentration over time.


Diagram 19 – NEET Chemistry Haloalkanes and Haloarenes

Solved Examples



  • Ex 1: Name the reactants for DDT preparation.
    Answer: Chloral and chlorobenzene.


Practice Set



  • Q1: DDT is mainly used as?

    A. Fertilizer

    B. Insecticide

    C. Solvent

    D. Fuel

  • Q2: Which is a harmful effect of DDT?

    A. Rapid metabolism

    B. Resistance in insects

    C. Water purification

    D. Increased plant growth

  • Q3: DDT accumulates in?

    A. Muscle tissue

    B. Fatty tissue

    C. Bone

    D. Blood plasma


Answer Key



  • Q1: B - Used as insecticide.

  • Q2: B - Insects developed resistance.

  • Q3: B - Deposited in fatty tissues.


Memory Aids



  • DDT = insecticide, fat soluble, bioaccumulates.

  • Resistance and toxicity to aquatic life are key concerns.



Polyhalogen Compounds Table


Diagram 20 – NEET Chemistry Haloalkanes and Haloarenes

Summary



  • Table lists important polyhalogen compounds with formula and uses.

  • Examples include chloretone (drug), phosgene (poison gas), freon (refrigerant), tear gas, insecticides, antiseptics, anesthetics, fire extinguishers, solvents.

  • Shows diverse applications in medicine, industry, and agriculture.


Solved Examples



  • Ex 1: Identify the compound used as a fire extinguisher.
    Answer: Carbon tetrachloride (pyrene).


Practice Set



  • Q1: Which compound is used as an insecticide?

    A. Phosgene

    B. DDT

    C. Freon

    D. Chloretone

  • Q2: Phosgene is used as?

    A. Refrigerant

    B. Poisonous gas

    C. Solvent

    D. Antiseptic

  • Q3: Which compound is a hypnotic drug?

    A. Chloretone

    B. DDT

    C. Freon

    D. Phosgene


Answer Key



  • Q1: B - DDT is an insecticide.

  • Q2: B - Phosgene is a poisonous gas.

  • Q3: A - Chloretone is a hypnotic drug.


Memory Aids



  • Match compound to use: DDT-insecticide, Phosgene-poison, Freon-refrigerant.

  • Remember chloretone as drug, pyrene as fire extinguisher.



Distinction Between Chloroform and Iodoform


Key Difference



  • Iodoform on heating with AgNO3 gives yellow precipitate of AgI.

  • Chloroform does not give this test due to its stable nature.


Solved Examples



  • Ex 1: What precipitate forms when iodoform reacts with AgNO3?
    Answer: Yellow AgI precipitate.


Practice Set



  • Q1: Which compound gives yellow precipitate with AgNO3?

    A. Chloroform

    B. Iodoform

    C. Dichloromethane

    D. Carbon tetrachloride

  • Q2: Why does chloroform not give AgI precipitate?

    A. It is unstable

    B. It is stable

    C. It contains iodine

    D. It reacts with water

  • Q3: The yellow precipitate formed is?

    A. AgCl

    B. AgBr

    C. AgI

    D. AgF


Answer Key



  • Q1: B - Iodoform gives yellow AgI precipitate.

  • Q2: B - Chloroform is stable and does not react.

  • Q3: C - Yellow precipitate is silver iodide (AgI).


Memory Aids



  • Iodoform test: Yellow AgI precipitate with AgNO3.

  • Chloroform is stable; no precipitate formed.

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View
Haloalkanes and Haloarenes Notes – NEET Chemistry | Prepzy