NEET UG . NEET Chemistry . Chemistry . Thermodynamics

Chapter 5: Thermodynamics

Ch 5

NEET Chemistry

NEET UG

"

Introduction

Overview

  • Thermodynamics studies energy forms and transformations, mainly heat and work.

  • Laws apply only when systems are at or move between equilibrium states.

  • Chemical thermodynamics focuses on chemical changes and substances.

Solved Examples

  • Ex 1: Identify the type of thermodynamics studying heat in chemical reactions.
    Answer: Chemical thermodynamics.

Practice Set

  • Q1: Thermodynamics primarily studies:
    A) Electrical energy
    B) Energy transformations
    C) Nuclear reactions
    D) Mechanical forces

  • Q2: Laws of thermodynamics apply when the system is:
    A) Non-equilibrium
    B) Equilibrium
    C) Isolated only
    D) Closed only

  • Q3: Chemical thermodynamics deals with:
    A) Physical changes only
    B) Chemical changes only
    C) Mechanical work only
    D) Heat only

Answer Key

  • Q1: B - Thermodynamics studies energy transformations, especially heat and work.

  • Q2: B - Laws apply when systems are at or move between equilibrium states.

  • Q3: B - Chemical thermodynamics focuses on chemical changes and substances.

Memory Aids

  • Thermodynamics = Energy + Transformations.

  • Laws valid only at equilibrium.

  • Chemical thermodynamics = chemical changes only.

Thermodynamic Terms

Key Definitions

  • System: Part of universe under study; rest is surroundings.

  • Boundary: Real or imaginary surface separating system and surroundings.

  • Types of Systems:

    • Open: Exchange matter and energy.

    • Closed: Exchange energy only.

    • Isolated: No exchange of matter or energy.

Diagram 1 – NEET Chemistry Thermodynamics

Solved Examples

  • Ex 1: Classify a system that exchanges only energy.
    Answer: Closed system.

Practice Set

  • Q1: A system exchanging both matter and energy is:
    A) Closed
    B) Open
    C) Isolated
    D) Adiabatic

  • Q2: Which system exchanges neither matter nor energy?
    A) Open
    B) Closed
    C) Isolated
    D) Cyclic

  • Q3: Boundary is:
    A) Part of surroundings
    B) Surface separating system and surroundings
    C) The system itself
    D) Energy inside system

Answer Key

  • Q1: B - Open systems exchange both matter and energy.

  • Q2: C - Isolated systems exchange neither matter nor energy.

  • Q3: B - Boundary separates system from surroundings.

Memory Aids

  • Open = Both matter & energy exchange.

  • Closed = Only energy exchange.

  • Isolated = No exchange.

The State of the System

State and Processes

  • Thermodynamic state: Set of measurable properties (P, T, V, n) defining system.

  • State variables/functions: Properties depending only on state, not path.

  • Thermodynamic processes:

    • Isothermal: Constant temperature (ΔT=0)

    • Adiabatic: No heat exchange (q=0)

    • Isobaric: Constant pressure (ΔP=0)

    • Isochoric: Constant volume (ΔV=0)

    • Processes can be cyclic, reversible, or irreversible.

Diagram 2 – NEET Chemistry Thermodynamics
  • Reversible: direction may be reversed at any stage

  • Irreversible process : Proceeds only in one direction and cannot be reversed.

    Cyclic process : System returns to its original state after a number of steps. For such a process, ΔU =0 and ΔH =0.

  • Exothermic process : Accompanied by the evolution of heat.

  • Endothermic process : Accompanied by the absorption of heat.

Diagram 3 – NEET Chemistry Thermodynamics

Solved Examples

  • Ex 1: Identify process with no heat exchange.
    Answer: Adiabatic process.

  • Ex 2: Process at constant pressure is called?
    Answer: Isobaric process.

Practice Set

  • Q1: Which process occurs at constant volume?
    A) Isobaric
    B) Isochoric
    C) Isothermal
    D) Adiabatic

  • Q2: In which process is temperature constant?
    A) Isothermal
    B) Adiabatic
    C) Isobaric
    D) Irreversible

  • Q3: A cyclic process:
    A) Changes state variables permanently
    B) Returns system to original state
    C) Is always irreversible
    D) Has ΔU ≠ 0

Answer Key

  • Q1: B - Isochoric means constant volume.

  • Q2: A - Isothermal means constant temperature.

  • Q3: B - Cyclic process returns system to original state; ΔU=0.

Memory Aids

  • Isothermal = T constant.

  • Adiabatic = q=0, no heat exchange.

  • Isobaric = P constant.

  • Isochoric = V constant.

  • Cyclic = returns to start state.

Internal Energy as a State Function

Concepts and Laws

  • Internal energy (U): Total energy inside system (chemical, electrical, mechanical).

  • U changes when:

    • Heat (q) enters or leaves system.

    • Work (w) is done on or by system.

    • Matter enters or leaves system.

  • First law of thermodynamics: Energy of isolated system is constant (conservation of energy).

  • Mathematical form: ΔU = q + w or q = ΔU − w

  • q and w are path functions; ΔU is a state function.

  • Sign conventions:

    • Heat absorbed by system: +ve

    • Heat evolved by system: −ve

    • Work done on system: +ve

    • Work done by system: −ve

  • For adiabatic change (q=0): ΔU = wad

  • At constant volume (no work): ΔU = qv

Solved Examples

  • Ex 1: Calculate ΔU if system absorbs 100 J heat and does 40 J work.
    Solution: ΔU = q + w = 100 + (−40) = 60 J.

Practice Set

  • Q1: If system absorbs 50 J heat and work done on system is 20 J, ΔU is:
    A) 30 J
    B) 70 J
    C) −30 J
    D) −70 J

  • Q2: For adiabatic process, heat exchanged is:
    A) Positive
    B) Negative
    C) Zero
    D) Variable

  • Q3: Work done by system is 80 J and heat evolved is 30 J, ΔU is:
    A) +110 J
    B) −110 J
    C) +50 J
    D) −50 J

Answer Key

  • Q1: B - ΔU = q + w = 50 + 20 = 70 J.

  • Q2: C - Adiabatic means no heat exchange (q=0).

  • Q3: D - q = −30 J, w = −80 J (work done by system), ΔU = q + w = −110 J.

Memory Aids

  • ΔU = q + w (First law).

  • Heat in (+), heat out (−).

  • Work on system (+), work by system (−).

  • Adiabatic: q=0.

  • Constant volume: ΔU = qv.

Work

Isothermal Reversible Expansion of an Ideal Gas

  • Gas expands slowly in a cylinder with a frictionless piston; volume increases, pressure decreases.

  • Work done in infinitesimal expansion: \dw = -P_{ex} dV = -P dV \.

  • Total work from initial volume \V_i \ to final volume \V_f \: \w_{rev} = -nRT \\ln \\frac{V_f}{V_i} = nRT \\ln \\frac{P_i}{P_f} \.

  • Work done during isothermal compression: \w_{rev} = 2.303 nRT \\log \\frac{P_i}{P_f} \ (positive value).

Diagram 4 – NEET Chemistry ThermodynamicsDiagram 5 – NEET Chemistry Thermodynamics

Free Expansion

  • Expansion into vacuum (\P_{ex} = 0 \) is free expansion.

  • No work is done: \w = 0 \, whether reversible or irreversible.

  • Internal energy change: \\\Delta U = q - P_{ex} \\Delta V \.

  • At constant volume, \\\Delta U = q_v \.

Isothermal and Free Expansion of an Ideal Gas

  • Isothermal expansion into vacuum: \w = 0 \ since \P_{ex} = 0 \.

  • Isothermal irreversible change: \q = -P_{ex} (V_f - V_i) \.

  • Isothermal reversible change: \q = w = 2.303 nRT \\log \\frac{V_f}{V_i} \.

  • Adiabatic change: \q = 0 \, \\\Delta U = w_{ad} \.

Solved Examples

Ex 1: Calculate work done when 1 mole of ideal gas expands isothermally and reversibly from 10 L to 20 L at 300 K.

  • Use \w = -nRT \\ln \\frac{V_f}{V_i} \.

  • \w = -1 \\times 8.314 \\times 300 \\times \\ln(2) = -1729 \\text{ J} \.

Practice Set

  • Q1: Work done during isothermal reversible expansion is

    • A) Positive

    • B) Negative

    • C) Zero

    • D) Depends on gas

  • Q2: For free expansion of an ideal gas, work done is

    • A) Equal to \nRT \

    • B) Zero

    • C) Negative

    • D) Depends on volume

  • Q3: Work done in isothermal reversible compression from pressure \P_i \ to \P_f \ is

    • A) \2.303 nRT \\log \\frac{P_f}{P_i} \

    • B) \-2.303 nRT \\log \\frac{P_i}{P_f} \

    • C) \2.303 nRT \\log \\frac{P_i}{P_f} \

    • D) Zero

Answer Key

  • Q1: B - Work done by gas during expansion is negative (energy leaves system).

  • Q2: B - No work done in free expansion as external pressure is zero.

  • Q3: C - Work done in isothermal reversible compression is positive and given by \2.303 nRT \\log \\frac{P_i}{P_f} \.

Memory Aids

  • Isothermal expansion: work negative, volume ↑, pressure ↓.

  • Free expansion: no work done.

  • Compression work positive, opposite sign to expansion.

Enthalpy

Definition and Properties

  • Enthalpy (H) = Internal energy (U) + Pressure × Volume (PV).

  • Extensive and state function; absolute value unknown.

  • Change in enthalpy: \\\Delta H = \\Delta U + P \\Delta V \.

  • Exothermic: \\\Delta H < 0 \; Endothermic: \\\Delta H > 0 \.

Relation with Heat and Work

  • First law: \q = \\Delta U - w \, with \w = -P \\Delta V \.

  • At constant volume: \w = 0 \, so \q_v = \\Delta U \.

  • At constant pressure: \q_p = \\Delta U + P \\Delta V = \\Delta H \.

  • \P \\Delta V = \\Delta n_g RT \, where \\\Delta n_g \ = moles gaseous products - reactants.

  • Thus, \\\Delta H = \\Delta U + \\Delta n_g RT \.

  • If \\\Delta n_g > 0 \, then \\\Delta H > \\Delta U \; if \\\Delta n_g < 0 \, then \\\Delta H < \\Delta U \; if zero, \\\Delta H = \\Delta U \.

  • For reactions in solids/liquids or closed vessels (\\\Delta V = 0 \), \\\Delta H = \\Delta U \.

Solved Examples

Ex 1: For a reaction with \\\Delta U = -100 \\text{ kJ} \ and \\\Delta n_g = 2 \ at 298 K, calculate \\\Delta H \.

  • \\\Delta H = \\Delta U + \\Delta n_g RT = -100 + 2 \\times 8.314 \\times 298 / 1000 = -95.05 \\text{ kJ} \.

Practice Set

  • Q1: Enthalpy is

    • A) Extensive and state function

    • B) Intensive and state function

    • C) Extensive and path function

    • D) Intensive and path function

  • Q2: At constant pressure, heat absorbed equals

    • A) \\\Delta U \

    • B) \\\Delta H \

    • C) Work done

    • D) Zero

  • Q3: For a reaction with no gas volume change, \\\Delta H \ is

    • A) Greater than \\\Delta U \

    • B) Less than \\\Delta U \

    • C) Equal to \\\Delta U \

    • D) Zero

Answer Key

  • Q1: A - Enthalpy depends on system size and is a state function.

  • Q2: B - Heat at constant pressure equals enthalpy change.

  • Q3: C - No gas volume change means \\\Delta H = \\Delta U \.

Memory Aids

  • \H = U + PV \.

  • At constant P, \q_p = \\Delta H \.

  • Gas volume change affects \\\Delta H \ vs \\\Delta U \.

Heat Capacity

Definitions

  • Heat capacity (C): heat needed to raise temperature by 1°C.

  • Molar heat capacity (Cm): heat to raise 1 mole by 1°C, \C_m = C/n \.

  • Specific heat capacity (c): heat to raise 1 g by 1°C, \q = mc \\Delta T \.

  • Water's specific heat: 1 cal g-1 K-1 = 4.18 J g-1 K-1.

Relation Between Cp and Cv

  • \C_p = \\frac{\\Delta H}{\\Delta T} \, \C_v = \\frac{\\Delta U}{\\Delta T} \.

  • Difference: \C_p - C_v = R \ (ideal gas).

  • Ratio: \\\gamma = \\frac{C_p}{C_v} \.

  • Values: Monatomic gas \\\gamma = 1.66 \, Diatomic \1.40 \, Triatomic \1.30 \.

Solved Examples

Ex 1: Calculate \C_p \ if \C_v = 20.8 \\text{ J/mol·K} \ for an ideal gas.

  • \C_p = C_v + R = 20.8 + 8.314 = 29.1 \\text{ J/mol·K} \.

Practice Set

  • Q1: Heat capacity is

    • A) Heat per mole per °C

    • B) Heat per gram per °C

    • C) Heat to raise temperature by 1°C

    • D) Heat per volume per °C

  • Q2: For an ideal gas, \C_p - C_v = \

    • A) 0

    • B) R

    • C) \\\gamma \

    • D) 1

  • Q3: \\\gamma \ for diatomic gas is approximately

    • A) 1.66

    • B) 1.40

    • C) 1.30

    • D) 1.00

Answer Key

  • Q1: C - Heat capacity is heat required to raise temperature by 1°C.

  • Q2: B - Difference between \C_p \ and \C_v \ is gas constant R.

  • Q3: B - Diatomic gases have \\\gamma \\approx 1.40 \.

Memory Aids

  • \C_p - C_v = R \ for ideal gases.

  • \\\gamma \ decreases with molecular complexity.

  • Water has high specific heat capacity.

Efficiency of Heat Engine

Key Points

  • Efficiency \\\eta = \\frac{w}{q_2} = \\frac{T_2 - T_1}{T_2} = \\frac{q_2 - q_1}{q_2} \.

  • \q_2 \: heat absorbed at high temperature \T_2 \.

  • \q_1 \: heat rejected at low temperature \T_1 \.

  • \w \: net work done by engine.

  • Unit conversions: 1 J = 0.2390 cal, 1 cal = 4.184 J, 1 litre-atm = 101.3 J.

Solved Examples

Ex 1: Calculate efficiency of engine operating between 500 K and 300 K.

  • \eta=frac500−300500=0.4=40\\eta = \\frac{500 - 300}{500} = 0.4 = 40\\% \.

Practice Set

  • Q1: Efficiency of heat engine is

    • A) \\\frac{T_1}{T_2} \

    • B) \\\frac{T_2 - T_1}{T_2} \

    • C) \\\frac{T_2}{T_1} \

    • D) \\\frac{T_1 - T_2}{T_1} \

  • Q2: Heat rejected by engine is

    • A) \q_2 \

    • B) \q_1 \

    • C) Work done

    • D) Zero

  • Q3: If \q_2 = 1000 \\text{ J} \ and efficiency is 30%, work done is

    • A) 300 J

    • B) 700 J

    • C) 1300 J

    • D) 1000 J

Answer Key

  • Q1: B - Efficiency formula is \\\frac{T_2 - T_1}{T_2} \.

  • Q2: B - Heat rejected is \q_1 \ at low temperature.

  • Q3: A - Work done = efficiency × heat absorbed = 0.3 × 1000 = 300 J.

Memory Aids

  • Efficiency depends on temperature difference.

  • Heat rejected always less than heat absorbed.

Joule–Thomson Effect

Concept

  • Temperature change when gas expands adiabatically from high to low pressure through a small opening.

  • Joule-Thomson coefficient: \\\mu_{JT} = \\left( \\frac{\\partial T}{\\partial P} \\right)_H \.

  • For ideal gases, \\\mu_{JT} = 0 \; no temperature change on expansion.

Adiabatic Reversible Expansion

  • Relations: \PV^\\gamma = \\text{constant} \, \TV^{\\gamma -1} = \\text{constant} \, \T^\\gamma P^{1-\\gamma} = \\text{constant} \.

  • Work done: \w = \\frac{nR (T_1 - T_2)}{\\gamma - 1} \.

Solved Examples

Ex 1: Calculate work done when 1 mole of gas cools from 400 K to 300 K adiabatically with \\\gamma = 1.4 \.

  • \w = \\frac{1 \\times 8.314 \\times (400 - 300)}{1.4 - 1} = 2078.5 \\text{ J} \.

Practice Set

  • Q1: Joule-Thomson effect is zero for

    • A) Real gases

    • B) Ideal gases

    • C) Liquids

    • D) Solids

  • Q2: In adiabatic reversible expansion, \PV^\\gamma = \ ?

    • A) Variable

    • B) Constant

    • C) Zero

    • D) Infinity

  • Q3: Work done in adiabatic expansion depends on

    • A) Temperature difference and \\\gamma \

    • B) Pressure only

    • C) Volume only

    • D) None

Answer Key

  • Q1: B - Ideal gases show no Joule-Thomson effect.

  • Q2: B - \PV^\\gamma \ remains constant in adiabatic reversible expansion.

  • Q3: A - Work depends on temperature difference and heat capacity ratio \\\gamma \.

Memory Aids

  • Joule-Thomson effect zero for ideal gases.

  • Adiabatic expansion: \PV^\\gamma = \\text{constant} \.

  • Work formula involves \(T_1 - T_2)/(\\gamma -1) \.

Measurement of ΔU and ΔH: Calorimetry

Measurement of ΔU

  • Performed using a bomb calorimeter, a sealed vessel where volume is constant.

  • Formula: ΔU = C × Δt × (M / m)

  • Where:

    • m = mass of substance

    • M = molar mass of substance

    • C = heat capacity of calorimeter

    • Δt = temperature change observed

  • Measures internal energy change at constant volume.

Measurement of ΔH

  • Reaction carried out in an insulated calorimeter vessel.

  • Temperature rise or fall is recorded depending on exothermic or endothermic nature.

  • Measures enthalpy change at constant pressure.

Solved Examples

  • Ex 1: Calculate ΔU if 2 g of a substance (M = 50 g/mol) causes a 3°C rise in a calorimeter with heat capacity 100 J/°C.

    • ΔU = 100 × 3 × (50 / 2) = 7500 J

  • Ex 2: In a calorimeter, temperature falls by 2°C during a reaction. Is the reaction exothermic or endothermic?

    • Temperature fall indicates endothermic reaction.

Practice Set

  • Q1: Which calorimeter is used to measure ΔU?

    • A. Coffee cup calorimeter

    • B. Bomb calorimeter

    • C. Differential scanning calorimeter

    • D. Adiabatic calorimeter

  • Q2: In the formula ΔU = C × Δt × (M / m), what does C represent?

    • A. Molar mass of substance

    • B. Heat capacity of calorimeter

    • C. Mass of substance

    • D. Temperature change

  • Q3: A reaction in a calorimeter causes temperature to rise by 5°C. The heat capacity of calorimeter is 200 J/°C. If 4 g of substance (M = 40 g/mol) reacted, calculate ΔU.

    • A. 10000 J

    • B. 1000 J

    • C. 5000 J

    • D. 2500 J

Answer Key

  • Q1: B. Bomb calorimeter - It operates at constant volume to measure ΔU.

  • Q2: B. Heat capacity of calorimeter - C is the calorimeter's heat capacity.

  • Q3: A. 10000 J - ΔU = 200 × 5 × (40 / 4) = 10000 J.

Memory Aids

  • Bomb calorimeter = constant volume → measures ΔU.

  • Insulated vessel calorimeter = constant pressure → measures ΔH.

  • ΔU formula: Heat capacity × temperature change × (molar mass / mass).

Enthalpy Change, Reaction Enthalpy

Definition and Calculation

  • Reaction enthalpy (ΔrH): Enthalpy change during a chemical reaction.

  • Calculated as: ΔrH = ΣaiHproducts − ΣbiHreactants

  • a and b are stoichiometric coefficients of products and reactants.

  • Example: CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)

    • ΔrH = [Hm(CO2) + 2Hm(H2O)] − [Hm(CH4) + 2Hm(O2)]

  • Hm = molar enthalpy.

  • Standard enthalpy of reaction: Enthalpy change when all substances are in their standard states (pure form at 1 bar).

Enthalpy Changes During Phase Transformations

  • Enthalpy of fusion (ΔfusH°): Solid → Liquid at melting point.

    • Example: H2O(s) → H2O(l) at 273 K; ΔfusH° = +6.0 kJ mol−1

  • Enthalpy of vaporisation (ΔvapH°): Liquid → Vapour at boiling point.

    • Example: H2O(l) → H2O(g) at 373 K; ΔvapH° = +40.79 kJ mol−1

  • Enthalpy of sublimation (ΔsubH°): Solid → Vapour directly.

    • Example: Iodine sublimation ΔsubH° = +62.4 kJ mol−1

    • Relation: ΔsubH° = ΔfusH° + ΔvapH°

  • Enthalpy of formation (ΔfH°): Formation of 1 mole of substance from elements in standard states.

    • Example: Cgraphite(s) + 2H2(g) → CH4(g); ΔfH° = −74.8 kJ mol−1

Hess’s Law of Constant Heat Summation

  • If a reaction occurs in multiple steps, total enthalpy change equals sum of enthalpy changes of steps at same temperature.

  • Mathematically: ΔrH = ΔrH1 + ΔrH2 + ΔrH3

Diagram 6 – NEET Chemistry Thermodynamics

Solved Examples

  • Ex 1: Calculate ΔrH for CH4 combustion if Hm(CO2) = −393.5 kJ/mol, Hm(H2O) = −285.8 kJ/mol, Hm(CH4) = −74.8 kJ/mol, Hm(O2) = 0 kJ/mol.

    • ΔrH = [−393.5 + 2(−285.8)] − [−74.8 + 2(0)] = −890.3 kJ/mol

  • Ex 2: Using Hess’s law, find ΔrH for A → B given ΔrH1 (A → C) = +50 kJ, ΔrH2 (C → D) = −30 kJ, ΔrH3 (D → B) = +20 kJ.

    • ΔrH = 50 − 30 + 20 = +40 kJ

Practice Set

  • Q1: What is the enthalpy change called when one mole of a solid converts to liquid at melting point?

    • A. Enthalpy of vaporisation

    • B. Enthalpy of fusion

    • C. Enthalpy of sublimation

    • D. Enthalpy of formation

  • Q2: For the reaction Cgraphite(s) + O2(g) → CO2(g), the ΔfH° is −393.5 kJ/mol. What does this represent?

    • A. Enthalpy of vaporisation of CO2

    • B. Enthalpy of formation of CO2

    • C. Enthalpy of fusion of graphite

    • D. Enthalpy of sublimation of CO2

  • Q3: Using Hess’s law, if ΔrH for A → C is +60 kJ, C → D is −25 kJ, and D → B is +15 kJ, find ΔrH for A → B.

    • A. +100 kJ

    • B. +50 kJ

    • C. +40 kJ

    • D. −20 kJ

Answer Key

  • Q1: B. Enthalpy of fusion is the heat required to convert solid to liquid at melting point.

  • Q2: B. Enthalpy of formation is heat change when 1 mole of compound forms from elements in standard states.

  • Q3: C. ΔrH = 60 − 25 + 15 = +50 kJ (corrected: sum is +50 kJ, so option B is correct)

Memory Aids

  • Enthalpy of fusion: solid to liquid (melting).

  • Enthalpy of vaporisation: liquid to gas (boiling).

  • Enthalpy of sublimation: solid to gas directly; equals fusion + vaporisation enthalpies.

  • Hess’s law: total enthalpy change independent of path; sum of steps.

Enthalpy of Combustion

Definition and Key Points

  • Change in enthalpy when 1 mole of a substance burns completely in oxygen.

  • Example: C(s) + O2(g) → CO2(g); ΔcH° = –393.5 kJ mol–1

  • ΔcH° is always negative (exothermic reaction).

Solved Examples

  • Ex 1: Calculate heat released when 2 moles of carbon burn.

    • ΔcH° for 1 mole C = –393.5 kJ

    • For 2 moles: Heat = 2 × (–393.5) = –787 kJ

Practice Set

  • Q1: What is the sign of enthalpy of combustion?

    • A) Positive

    • B) Negative

    • C) Zero

    • D) Depends on substance

  • Q2: Combustion of 1 mole of methane releases –890 kJ. What is ΔcH°?

    • A) +890 kJ mol–1

    • B) –890 kJ mol–1

    • C) 0 kJ mol–1

    • D) +393.5 kJ mol–1

  • Q3: Which of the following has the most negative enthalpy of combustion?

    • A) C2H6

    • B) C3H8

    • C) C4H10

    • D) CH4

Answer Key

  • Q1: B) Negative – Combustion releases heat, so enthalpy change is negative.

  • Q2: B) –890 kJ mol–1 – Given heat released equals enthalpy of combustion.

  • Q3: C) C4H10 – Larger hydrocarbons release more heat on combustion.

Memory Aids

  • Combustion = burning → always exothermic → ΔH negative.

  • More carbon atoms → more negative ΔcH°.

Enthalpy of Atomization

Definition and Key Points

  • Energy change when 1 mole of bonds breaks to form gaseous atoms.

  • Example: CH4(g) → C(g) + 4H(g); ΔaH = 1665 kJ mol–1

  • Bond dissociation enthalpy is related; it is energy to break 1 mole of covalent bonds in gas phase.

Solved Examples

  • Ex 1: Calculate bond dissociation enthalpy of H–H if H2 → 2H requires 436 kJ.

    • Bond dissociation enthalpy = 436 kJ mol–1

Practice Set

  • Q1: Enthalpy of atomization is always:

    • A) Negative

    • B) Positive

    • C) Zero

    • D) Depends on compound

  • Q2: Which process represents atomization?

    • A) H2O(l) → H2O(g)

    • B) CH4(g) → C(g) + 4H(g)

    • C) NaCl(s) → Na+(g) + Cl–(g)

    • D) C(graphite) → C(diamond)

  • Q3: Bond dissociation enthalpy is related to:

    • A) Energy to form bonds

    • B) Energy to break bonds

    • C) Energy of phase change

    • D) Energy of ionization

Answer Key

  • Q1: B) Positive – Energy is required to break bonds.

  • Q2: B) CH4(g) → C(g) + 4H(g) – Breaking bonds to atoms.

  • Q3: B) Energy to break bonds – Bond dissociation enthalpy is bond breaking energy.

Memory Aids

  • Atomization = bond breaking → always endothermic (+ΔH).

  • Bond dissociation enthalpy = energy to break 1 mole of bonds.

Bond Enthalpy

Definition and Key Points

  • Standard enthalpy change related to bond enthalpies of reactants and products.

  • Formula: ΔrH° = Σ bond enthalpiesreactants – Σ bond enthalpiesproducts

  • Used to estimate enthalpy changes in gas phase reactions.

Solved Examples

  • Ex 1: Calculate ΔrH° for H2 + Cl2 → 2HCl given:

    • H–H = 436 kJ/mol, Cl–Cl = 243 kJ/mol, H–Cl = 431 kJ/mol

    • ΔrH° = (436 + 243) – 2×431 = 679 – 862 = –183 kJ/mol

Practice Set

  • Q1: Bond enthalpy is the energy required to:

    • A) Form bonds

    • B) Break bonds

    • C) Ionize atoms

    • D) Change phase

  • Q2: For reaction A–B + C–D → A–D + C–B, ΔrH° is:

    • A) Sum bonds broken – sum bonds formed

    • B) Sum bonds formed – sum bonds broken

    • C) Sum bonds broken + sum bonds formed

    • D) Zero

  • Q3: Calculate ΔrH° for H2 + F2 → 2HF given H–H=436, F–F=158, H–F=565 kJ/mol.

    • A) –542 kJ/mol

    • B) +542 kJ/mol

    • C) –158 kJ/mol

    • D) +158 kJ/mol

Answer Key

  • Q1: B) Break bonds – Bond enthalpy is bond breaking energy.

  • Q2: A) Sum bonds broken – sum bonds formed – standard formula.

  • Q3: A) –542 kJ/mol – (436+158) – 2×565 = 594 – 1130 = –542 kJ/mol.

Memory Aids

  • ΔH = bonds broken – bonds formed.

  • Breaking bonds requires energy (+), forming bonds releases energy (–).

Lattice Enthalpy

Definition and Key Points

  • Enthalpy change when 1 mole of ionic solid dissociates into gaseous ions.

  • Calculated using Born–Haber cycle.

  • Example for NaCl:

    • ΔfH°(NaCl) = ΔsubH°(Na) + ½ ΔdissH°(Cl2) + ΔionH°(Na) + ΔegH°(Cl) + ΔlatticeH°(NaCl)

Diagram 7 – NEET Chemistry Thermodynamics

Solved Examples

  • Ex 1: Use Born–Haber cycle to find lattice enthalpy if other values are known.

    • Rearrange formula to find ΔlatticeH°.

Practice Set

  • Q1: Lattice enthalpy is energy:

    • A) Released when ions form solid

    • B) Required to dissociate solid into ions

    • C) Required to vaporize solid

    • D) Released when atoms ionize

  • Q2: Born–Haber cycle helps to calculate:

    • A) Ionization energy

    • B) Lattice enthalpy

    • C) Bond enthalpy

    • D) Enthalpy of combustion

  • Q3: Which step is NOT part of Born–Haber cycle for NaCl?

    • A) Sublimation of Na

    • B) Dissociation of Cl2

    • C) Ionization of Cl

    • D) Electron gain by Cl

Answer Key

  • Q1: B) Required to dissociate solid into ions – lattice enthalpy is dissociation energy.

  • Q2: B) Lattice enthalpy – Born–Haber cycle calculates lattice enthalpy.

  • Q3: C) Ionization of Cl – Cl gains electron, does not lose (ionization is for Na).

Memory Aids

  • Born–Haber cycle = sum of steps to form ionic solid.

  • Lattice enthalpy = energy to break ionic solid into gaseous ions.

Enthalpy of Solution

Definition and Key Points

  • Enthalpy change when 1 mole of substance dissolves in solvent.

  • Formula: ΔsolH° = ΔlatticeH° + ΔhydH°

  • Usually positive (endothermic) for ionic compounds.

  • Solubility increases with temperature if ΔsolH° is positive.

  • High lattice enthalpy may prevent dissociation.

Solved Examples

  • Ex 1: Calculate ΔsolH° if lattice enthalpy = +780 kJ/mol and hydration enthalpy = –720 kJ/mol.

    • ΔsolH° = 780 + (–720) = +60 kJ/mol (endothermic)

Practice Set

  • Q1: Enthalpy of solution is:

    • A) Heat change on dissolving 1 mole solute

    • B) Heat change on melting solute

    • C) Heat change on vaporizing solute

    • D) Heat change on ionization

  • Q2: If lattice enthalpy > hydration enthalpy, solution process is:

    • A) Exothermic

    • B) Endothermic

    • C) No change

    • D) Spontaneous

  • Q3: Solubility of salts generally increases with temperature because:

    • A) ΔsolH° is negative

    • B) ΔsolH° is positive

    • C) Lattice enthalpy decreases

    • D) Hydration enthalpy increases

Answer Key

  • Q1: A) Heat change on dissolving 1 mole solute – definition of enthalpy of solution.

  • Q2: B) Endothermic – lattice enthalpy > hydration enthalpy means heat absorbed.

  • Q3: B) ΔsolH° is positive – endothermic dissolution increases with temperature.

Memory Aids

  • ΔsolH° = lattice + hydration enthalpy.

  • Positive ΔsolH° → solubility ↑ with temperature.

Enthalpy of Dilution

Definition and Key Points

  • Heat change when additional solvent is added to a solution at constant T and P.

  • Heat withdrawn from surroundings (usually exothermic).

  • Depends on original concentration of solution.

Solved Examples

  • Ex 1: Adding water to concentrated acid releases heat (exothermic dilution).

Practice Set

  • Q1: Enthalpy of dilution is heat change when:

    • A) Solute dissolves

    • B) Solvent evaporates

    • C) More solvent added to solution

    • D) Solution freezes

  • Q2: Enthalpy of dilution depends on:

    • A) Temperature only

    • B) Original concentration

    • C) Volume only

    • D) Pressure only

  • Q3: Dilution of concentrated acid is usually:

    • A) Endothermic

    • B) Exothermic

    • C) No heat change

    • D) Spontaneous

Answer Key

  • Q1: C) More solvent added to solution – definition of enthalpy of dilution.

  • Q2: B) Original concentration – affects heat change on dilution.

  • Q3: B) Exothermic – heat released when acid diluted.

Memory Aids

  • Dilution = adding solvent → heat change depends on concentration.

  • Concentrated acids release heat on dilution.

Enthalpy of Neutralisation

Definition and Key Points

  • Heat change when 1 gram equivalent of acid neutralizes 1 gram equivalent of base in dilute solution.

  • Example: HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l); ΔneuH = –57.1 kJ mol–1

  • Usually exothermic (heat released).

Solved Examples

  • Ex 1: Calculate heat released when 0.5 mole HCl neutralizes NaOH.

    • Heat = 0.5 × (–57.1) = –28.55 kJ

Practice Set

  • Q1: Enthalpy of neutralisation is heat change when:

    • A) Acid reacts with base

    • B) Acid dissolves in water

    • C) Base melts

    • D) Salt forms solid

  • Q2: Neutralisation of strong acid and strong base releases:

    • A) Heat

    • B) No heat

    • C) Heat absorbed

    • D) Gas

  • Q3: ΔneuH for HCl + NaOH is approximately:

    • A) –57 kJ/mol

    • B) +57 kJ/mol

    • C) 0 kJ/mol

    • D) –393 kJ/mol

Answer Key

  • Q1: A) Acid reacts with base – definition of enthalpy of neutralisation.

  • Q2: A) Heat – neutralisation is exothermic.

  • Q3: A) –57 kJ/mol – standard enthalpy of neutralisation for strong acid-base.

Memory Aids

  • Neutralisation = acid + base → salt + water + heat.

  • Strong acid + strong base → ΔH ≈ –57 kJ/mol.

Enthalpy of Transition

Definition and Key Points

  • Enthalpy change when 1 mole of substance changes from one allotrope to another.

  • Example: C(graphite) → C(diamond); ΔtransH = 1.9 kJ mol–1

Solved Examples

  • Ex 1: Calculate heat required to convert 2 moles graphite to diamond.

    • Heat = 2 × 1.9 = 3.8 kJ

Practice Set

  • Q1: Enthalpy of transition involves change in:

    • A) Phase

    • B) Allotropic form

    • C) Ionization state

    • D) Chemical composition

  • Q2: Transition enthalpy for graphite to diamond is:

    • A) Negative

    • B) Positive

    • C) Zero

    • D) Very large

  • Q3: Which is more stable allotrope of carbon at room temperature?

    • A) Diamond

    • B) Graphite

    • C) Both equal

    • D) Depends on pressure

Answer Key

  • Q1: B) Allotropic form – transition between allotropes.

  • Q2: B) Positive – energy required to convert graphite to diamond.

  • Q3: B) Graphite – more stable at room temperature.

Memory Aids

  • Transition = allotrope change.

  • Graphite more stable than diamond at normal conditions.

Enthalpy of Hydration

Definition and Key Points

  • Heat change when 1 mole of anhydrous substance combines with water to form hydrated compound.

  • Example: CuSO4(s) + 5H2O → CuSO4·5H2O(s); ΔhydH = –78.2 kJ mol–1

  • Usually exothermic (heat released).

Solved Examples

  • Ex 1: Calculate heat released when 3 moles CuSO4 hydrate.

    • Heat = 3 × (–78.2) = –234.6 kJ

Practice Set

  • Q1: Enthalpy of hydration is heat change when:

    • A) Hydrated compound loses water

    • B) Anhydrous compound gains water

    • C) Compound melts

    • D) Compound vaporizes

  • Q2: Hydration enthalpy is usually:

    • A) Positive

    • B) Negative

    • C) Zero

    • D) Variable

  • Q3: Which compound forms pentahydrate on hydration?

    • A) CuSO4

    • B) NaCl

    • C) MgSO4

    • D) KCl

Answer Key

  • Q1: B) Anhydrous compound gains water – definition of enthalpy of hydration.

  • Q2: B) Negative – hydration releases heat.

  • Q3: A) CuSO4 – forms CuSO4·5H2O.

Memory Aids

  • Hydration = water addition → heat released.

  • CuSO4 commonly forms pentahydrate.

Spontaneity

Definition and Characteristics

  • Spontaneous process: occurs without external influence, irreversible.

  • Reversal requires external work.

Entropy (S)

  • Measure of disorder/randomness in a system.

  • For reversible process: \\\Delta S = \\frac{q_{rev}}{T} \.

  • Total entropy change for spontaneous process: \\\Delta S_{total} = \\Delta S_{system} + \\Delta S_{surroundings} > 0 \.

  • At equilibrium, entropy is maximum and \\\Delta S = 0 \.

  • Entropy change during phase changes:

    • Fusion: \\\Delta S = \\frac{\\Delta H_{fus}}{T_m} \

    • Vaporization: \\\Delta S = \\frac{\\Delta H_{vap}}{T_b} \

    • Sublimation: \\\Delta S = \\frac{\\Delta H_{sub}}{T} \

  • \T_m \: melting point, \T_b \: boiling point, \T \: sublimation temperature.

  • Entropy change of reaction: \\\Delta_r S^\\circ = \\sum S^\\circ_{products} - \\sum S^\\circ_{reactants} \.

Diagram 8 – NEET Chemistry Thermodynamics

Solved Examples

  • Ex 1: Calculate entropy change when 1 mole of ice melts at 273 K, \\\Delta H_{fus} = 6.01 \\text{ kJ/mol} \.

    • \\\Delta S = \\frac{\\Delta H_{fus}}{T_m} = \\frac{6010}{273} = 22.02 \\text{ J/K} \

Practice Set

  • Q1: Entropy change for vaporization is given by?

    • A. \\\frac{\\Delta H_{vap}}{T_b} \

    • B. \\\frac{\\Delta H_{fus}}{T_m} \

    • C. \\\frac{\\Delta H_{sub}}{T} \

    • D. \\\Delta H_{vap} \\times T_b \

  • Q2: For a spontaneous process, total entropy change is?

    • A. Zero

    • B. Negative

    • C. Positive

    • D. Undefined

  • Q3: At equilibrium, entropy change is?

    • A. Positive

    • B. Negative

    • C. Zero

    • D. Infinite

Answer Key

  • Q1: A - Entropy change for vaporization is heat absorbed divided by boiling point.

  • Q2: C - Spontaneous processes have positive total entropy change.

  • Q3: C - At equilibrium, entropy change is zero.

Memory Aids

  • Entropy increases with phase change: solid < liquid < gas.

  • Spontaneous process: total entropy change > 0.

  • At equilibrium: entropy change = 0.

Gibbs Free Energy

Definition and Equations

  • Gibbs free energy (G): energy available to do useful work.

  • Formula: \G = H - TS \.

  • Standard free energy change: \\\Delta_r G^\\circ = \\sum \\Delta_f G^\\circ_{products} - \\sum \\Delta_f G^\\circ_{reactants} \.

  • Gibbs–Helmholtz equation: \\\Delta G = \\Delta H - T \\Delta S \.

  • Relation with emf: \\\Delta G^\\circ = -nFE^\\circ \, where \E^\\circ \ is standard emf.

Gibbs Energy and Spontaneity

  • \\\Delta G < 0 \: spontaneous process.

  • \\\Delta G > 0 \: non-spontaneous process.

  • \\\Delta G = 0 \: equilibrium.

Effect of Temperature on Spontaneity

Diagram 9 – NEET Chemistry Thermodynamics
  • \\\Delta H < 0, \\Delta S > 0 \: spontaneous at all temperatures.

  • \\\Delta H < 0, \\Delta S < 0 \: spontaneous at low temperatures.

  • \\\Delta H > 0, \\Delta S > 0 \: spontaneous at high temperatures.

  • \\\Delta H > 0, \\Delta S < 0 \: never spontaneous.

Solved Examples

  • Ex 1: Calculate \\\Delta G \ at 298 K for a reaction with \\\Delta H = -40 \\text{ kJ} \ and \\\Delta S = -100 \\text{ J/K} \.

    • Convert \\\Delta S \ to kJ/K: \-0.1 \\text{ kJ/K} \.

    • \\\Delta G = -40 - 298 \\times (-0.1) = -40 + 29.8 = -10.2 \\text{ kJ} \ (spontaneous).

Practice Set

  • Q1: For \\\Delta G < 0 \, the process is?

    • A. Non-spontaneous

    • B. Spontaneous

    • C. At equilibrium

    • D. Irreversible

  • Q2: Gibbs free energy equation is?

    • A. \G = H + TS \

    • B. \G = H - TS \

    • C. \G = TS - H \

    • D. \G = H / TS \

  • Q3: If \\\Delta H > 0 \ and \\\Delta S < 0 \, reaction is?

    • A. Spontaneous at high T

    • B. Spontaneous at low T

    • C. Never spontaneous

    • D. Always spontaneous

Answer Key

  • Q1: B - Negative \\\Delta G \ means spontaneous.

  • Q2: B - Gibbs free energy formula is \G = H - TS \.

  • Q3: C - Reaction is never spontaneous if \\\Delta H > 0 \ and \\\Delta S < 0 \.

Memory Aids

  • \"G = H minus TS\" for free energy.

  • Spontaneity depends on signs of \\\Delta H \ and \\\Delta S \ and temperature.

  • Remember: Negative \\\Delta G \ = spontaneous.

Thermodynamics Laws

Second Law

  • For spontaneous processes, total entropy change \\\Delta S_{total} > 0 \.

Third Law

  • Entropy of pure crystalline substance approaches zero as temperature approaches absolute zero (0 K).

Additional Notes on Entropy

  • More symmetrical molecules have lower entropy than less symmetrical ones with similar mass and heat capacity.

  • Simple structured solids have lower entropy than complex structured solids.

  • Stretching rubber band decreases entropy (more ordered macromolecules).

  • Boiling egg increases entropy (protein denaturation to random coils).

  • Entropy of liquids/solids not much affected by pressure changes.

Entropy Change of Ideal Gas (1 mole)

  • \\\Delta S = C_V \\ln \\frac{T_2}{T_1} + R \\ln \\frac{V_2}{V_1} = C_P \\ln \\frac{T_2}{T_1} + R \\ln \\frac{P_1}{P_2} \

  • Isothermal: \\\Delta S_T = R \\ln \\frac{V_2}{V_1} = R \\ln \\frac{P_1}{P_2} \

  • Isochoric: \\\Delta S_V = C_V \\ln \\frac{T_2}{T_1} = C_V \\ln \\frac{P_2}{P_1} \

  • Isobaric: \\\Delta S_P = C_P \\ln \\frac{T_2}{T_1} = C_P \\ln \\frac{V_2}{V_1} \

Gibbs Helmholtz Equations

  • \\\Delta G = \\Delta H + T \\left[ \\frac{d(\\Delta G)}{dT} \\right]_P \

  • \\\frac{\\Delta G - \\Delta H}{T} = \\left[ \\frac{d(\\Delta G)}{dT} \\right]_P \

  • \-\\Delta S = \\left[ \\frac{d(\\Delta G)}{dT} \\right]_P \

Solved Examples

  • Ex 1: Calculate entropy change for 1 mole ideal gas expanding isothermally from 2 L to 4 L.

    • \\\Delta S = R \\ln \\frac{V_2}{V_1} = 8.314 \\times \\ln 2 = 5.76 \\text{ J/K} \

Practice Set

  • Q1: Entropy change for isothermal expansion is?

    • A. \C_V \\ln \\frac{T_2}{T_1} \

    • B. \R \\ln \\frac{V_2}{V_1} \

    • C. \C_P \\ln \\frac{T_2}{T_1} \

    • D. Zero

  • Q2: According to third law, entropy at 0 K is?

    • A. Infinite

    • B. Zero for pure crystalline substance

    • C. Negative

    • D. Undefined

  • Q3: Gibbs Helmholtz equation relates \\\Delta G \ with?

    • A. \\\Delta H \ and temperature derivative of \\\Delta G \

    • B. Pressure only

    • C. Volume only

    • D. Entropy only

Answer Key

  • Q1: B - Isothermal entropy change depends on volume change.

  • Q2: B - Entropy of pure crystalline substance approaches zero at 0 K.

  • Q3: A - Gibbs Helmholtz relates \\\Delta G \, \\\Delta H \, and temperature derivative.

Memory Aids

  • Entropy change formulas depend on process type (isothermal, isochoric, isobaric).

  • Third law: entropy zero at absolute zero for perfect crystals.

  • Gibbs Helmholtz links free energy change with enthalpy and temperature.

Gibbs Energy Change and Equilibrium

Relation between Gibbs Energy and Equilibrium Constant

  • Gibbs energy change for a reaction, ΔrG°, is linked to equilibrium constant K by:
    ΔrG° = –2.303 RT log K

  • R = gas constant, T = temperature in Kelvin

  • Negative ΔrG° means reaction favors products (K > 1)

  • Positive ΔrG° means reaction favors reactants (K < 1)

  • ΔrG° = 0 means equilibrium with equal reactants and products (K = 1)

Gibbs Energy and Equilibrium States

Diagram 10 – NEET Chemistry Thermodynamics
  • ΔG° = 0, log K = 0, K = 1: Reactants and products are in equal amounts at equilibrium

  • ΔG° < 0, log K > 0, K > 1: Reaction favors products; exothermic reaction

  • ΔG° > 0, log K < 0, K < 1: Reaction favors reactants; endothermic reaction

Solved Examples

  • Ex 1: Calculate ΔrG° at 298 K if K = 103.
    Step 1: Use ΔrG° = –2.303 RT log K
    Step 2: R = 8.314 J/mol·K, T = 298 K, log 103 = 3
    Step 3: ΔrG° = –2.303 × 8.314 × 298 × 3 = –17,100 J/mol (–17.1 kJ/mol)

  • Ex 2: For a reaction with ΔrG° = +5 kJ/mol at 298 K, find K.
    Step 1: Rearrange: log K = –ΔrG° / (2.303 RT)
    Step 2: log K = –5000 / (2.303 × 8.314 × 298) = –0.875
    Step 3: K = 10–0.875 ≈ 0.133 (favors reactants)

Practice Set

  • Q1: If ΔrG° = 0, what is the value of K?
    A. 0
    B. 1
    C. >1
    D. <1

  • Q2: For an exothermic reaction with K = 100 at 298 K, what is the sign of ΔrG°?
    A. Positive
    B. Negative
    C. Zero
    D. Cannot determine

  • Q3: Calculate ΔrG° at 300 K if K = 0.01. (R = 8.314 J/mol·K)
    A. +22.8 kJ/mol
    B. –22.8 kJ/mol
    C. +11.4 kJ/mol
    D. –11.4 kJ/mol

Answer Key

  • Q1: B. 1 — ΔrG° = 0 means log K = 0, so K = 1.

  • Q2: B. Negative — K > 1 implies ΔrG° < 0, favoring products.

  • Q3: A. +22.8 kJ/mol — ΔrG° = –2.303 × 8.314 × 300 × log 0.01 = +22,800 J/mol.

Memory Aids

  • ΔrG° = –2.303 RT log K: Negative ΔG means product-favored (K > 1)

  • K = 1 when ΔG = 0: equilibrium with equal reactants and products

  • Exothermic reactions usually have negative ΔG and K > 1

  • Endothermic reactions usually have positive ΔG and K < 1

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View
Thermodynamics Notes – NEET Chemistry | Prepzy