NEET UG . NEET Chemistry . Chemistry . Electrochemistry

Chapter 11: Electrochemistry

Ch 11

NEET Chemistry

NEET UG

"

Electrochemical Cells

Concept and Function

  • Convert chemical energy from spontaneous redox reactions into electrical energy.

  • Also called galvanic or voltaic cells.

  • Example: Daniell cell with Zn and Cu electrodes.

  • Standard cell potential: 1.1 V when [Zn2+] = [Cu2+] = 1 M.

  • Overall reaction: Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu(s).

Diagram 1 – NEET Chemistry Electrochemistry

Working Principle

  • Anode (Zn): Oxidation occurs, Zn → Zn2+ + 2e−.

  • Electrons flow through external circuit to cathode (Cu).

  • Cathode (Cu): Reduction occurs, Cu2+ + 2e− → Cu.

  • Salt bridge maintains charge neutrality by ion flow.

  • Electron flow produces measurable electric current.

Solved Examples

Ex 1

  • Calculate cell potential if [Zn2+] = 0.01 M and [Cu2+] = 1 M using Nernst equation.

  • Use standard E° = 1.1 V, n = 2.

  • Apply: \E = E^\\circ - \\frac{0.059}{n} \\log \\frac{[Zn^{2+}]}{[Cu^{2+}]} \

  • Result: E ≈ 1.1 - 0.0295 × log(0.01) = 1.1 + 0.059 = 1.159 V.

Practice Set

  • Q1: Which electrode is the anode in a Daniell cell?

    • A) Copper

    • B) Zinc

    • C) Both

    • D) None

  • Q2: What is the role of the salt bridge?

    • A) Conduct electrons

    • B) Prevent mixing of solutions

    • C) Maintain charge balance

    • D) Increase voltage

  • Q3: In the Daniell cell, which species is reduced?

    • A) Zn

    • B) Cu2+

    • C) Zn2+

    • D) Cu

Answer Key

  • Q1: B) Zinc - It undergoes oxidation and is the anode.

  • Q2: C) Maintain charge balance - It allows ion flow to complete the circuit.

  • Q3: B) Cu2+ - It gains electrons and is reduced to Cu metal.

Memory Aids

  • Anode is where Oxidation Occurs (AnOx).

  • Electrons flow from Anode to Cathode externally.

  • Salt bridge keeps solutions electrically neutral.

Electrolytic Cells

Concept and Function

  • Convert electrical energy into chemical energy via non-spontaneous reactions.

  • Require external power source (battery).

  • Example: Electrolysis of molten NaCl to produce Na and Cl2.

Diagram 2 – NEET Chemistry Electrochemistry

Working Principle

  • Molten NaCl dissociates into Na+ and Cl− ions.

  • Anode (positive): Cl− → Cl2 + 2e− (oxidation).

  • Cathode (negative): Na+ + e− → Na (reduction).

  • Inert electrodes prevent side reactions.

  • Electric current drives the decomposition.

Solved Examples

Ex 1

  • Calculate moles of Na produced by passing 19360 C through molten NaCl.

  • Use Faraday's law: 1 mole e− = 96500 C.

  • Na+ + e− → Na, so 1 mole Na requires 1 mole e−.

  • Moles Na = 19360 / 96500 ≈ 0.2 mol.

Practice Set

  • Q1: Which electrode is positive in an electrolytic cell?

    • A) Anode

    • B) Cathode

    • C) Both

    • D) None

  • Q2: What is produced at the cathode during NaCl electrolysis?

    • A) Cl2

    • B) Na

    • C) NaCl

    • D) H2

  • Q3: Why are inert electrodes used?

    • A) To conduct electricity only

    • B) To react with products

    • C) To prevent side reactions

    • D) To increase voltage

Answer Key

  • Q1: A) Anode - It is connected to positive terminal and is site of oxidation.

  • Q2: B) Na - Sodium ions gain electrons at cathode.

  • Q3: C) To prevent side reactions - Inert electrodes do not react during electrolysis.

Memory Aids

  • Electrolytic cell needs External Energy.

  • Anode is Positive, Cathode is Negative in electrolytic cells.

  • Oxidation at Anode, Reduction at Cathode always.

Daniell Cell and External Potential

Concept and Behavior

  • Daniell cell: Zn anode, Cu cathode, salt bridge, E° = 1.1 V.

  • Applying external voltage opposite to cell voltage affects reaction.

  • When external voltage < 1.1 V: cell reaction proceeds normally.

  • At external voltage = 1.1 V: reaction stops, no current flows (equilibrium).

  • When external voltage > 1.1 V: reaction reverses, cell acts as electrolytic cell.

  • Diagram 3 – NEET Chemistry Electrochemistry
Diagram 4 – NEET Chemistry Electrochemistry

Reaction Direction

  • Normal: Zn → Zn2+ + 2e−, Cu2+ + 2e− → Cu.

  • Reversed: Cu → Cu2+ + 2e−, Zn2+ + 2e− → Zn.

  • Electron flow reverses with external voltage > 1.1 V.

Solved Examples

Ex 1

  • Explain what happens if 1.2 V external voltage is applied opposite to Daniell cell voltage.

  • Reaction reverses; Zn2+ ions reduce to Zn metal at anode.

  • Cu metal oxidizes to Cu2+ ions at cathode.

Practice Set

  • Q1: What happens at Eext = 1.1 V?

    • A) Reaction proceeds forward

    • B) Reaction stops

    • C) Reaction reverses

    • D) Current increases

  • Q2: When Eext > 1.1 V, which electrode gains metal deposition?

    • A) Copper electrode

    • B) Zinc electrode

    • C) Both electrodes

    • D) None

  • Q3: What is the role of external voltage in Daniell cell?

    • A) Increase cell voltage

    • B) Stop or reverse reaction

    • C) Increase current only

    • D) None

Answer Key

  • Q1: B) Reaction stops - At equilibrium, no net current flows.

  • Q2: B) Zinc electrode - Zn2+ reduces to Zn metal when reaction reverses.

  • Q3: B) Stop or reverse reaction - External voltage can oppose cell voltage.

Memory Aids

  • At equilibrium voltage, cell reaction halts.

  • External voltage > cell voltage reverses reaction.

  • Daniell cell voltage = 1.1 V standard.

Comparison of Electrochemical and Electrolytic Cells

Key Differences

  • Electrochemical cells convert chemical energy to electrical energy; electrolytic cells do the reverse.

  • Electrochemical cells work spontaneously; electrolytic cells require external energy.

  • Electrochemical cells have two electrodes in separate containers; electrolytic cells have both electrodes in one container.

  • Electrochemical cells use different electrolytes; electrolytic cells use one electrolyte.

  • Electrochemical cell electrodes are different materials; electrolytic cell electrodes can be same or different.

  • Oxidation at anode (negative) and reduction at cathode (positive) in electrochemical cells; reversed polarity in electrolytic cells.

  • Electrochemical cells use salt bridge; electrolytic cells do not.

Diagram 5 – NEET Chemistry Electrochemistry

Solved Examples

Ex 1

  • Identify the type of cell: spontaneous reaction, two separate solutions, salt bridge present.

  • Answer: Electrochemical (galvanic) cell.

Practice Set

  • Q1: Which cell requires external power?

    • A) Electrochemical

    • B) Electrolytic

    • C) Both

    • D) None

  • Q2: In which cell does oxidation occur at negative electrode?

    • A) Electrochemical

    • B) Electrolytic

    • C) Both

    • D) None

  • Q3: Which cell uses a salt bridge?

    • A) Electrochemical

    • B) Electrolytic

    • C) Both

    • D) None

Answer Key

  • Q1: B) Electrolytic - Requires external electrical energy.

  • Q2: A) Electrochemical - Anode is negative and site of oxidation.

  • Q3: A) Electrochemical - Salt bridge completes circuit and maintains charge balance.

Memory Aids

  • Electrochemical: Spontaneous, salt bridge, separate containers.

  • Electrolytic: Non-spontaneous, no salt bridge, single container.

  • AnOx and RedCat apply to both but electrode polarity differs.

Galvanic Cells

Basic Concept

  • Convert Gibbs free energy of spontaneous redox reactions into electrical energy.

  • Used to power devices like motors, heaters, fans, geysers.

  • Consist of two half-cells connected externally by a wire and internally by a salt bridge.

  • Each half-cell has an electrode dipped in electrolyte solution of its salt.

  • Salt bridge maintains electrical neutrality and completes the circuit.

Anode and Cathode

  • Anode: Site of oxidation, negative potential, written on left in cell notation.

  • Cathode: Site of reduction, positive potential, written on right in cell notation.

Electrode Potential

  • Potential difference between metal and its ions in solution.

  • Standard Electrode Potential: Electrode potential when all species are at unit concentration.

  • Oxidation Potential: Tendency to lose electrons.

  • Reduction Potential: Tendency to gain electrons.

  • Standard reduction potentials are called standard electrode potentials (IUPAC).

Cell Potential and EMF

  • Cell potential (E) = Ecathode − Eanode.

  • Electromotive force (emf) is cell potential when no current flows.

  • For spontaneous reaction, E must be positive.

Example Reaction

  • Cu(s) + 2Ag+(aq) → Cu2+(aq) + 2Ag(s)

  • Cathode (reduction): 2Ag+(aq) + 2e− → 2Ag(s)

  • Anode (oxidation): Cu(s) → Cu2+(aq) + 2e−

  • Cell notation: Cu(s) | Cu2+(aq) || Ag+(aq) | Ag(s)

  • Ecell = EAg+|Ag − ECu2+|Cu

Role of Salt Bridge

  • Provides ions with similar conductance to maintain charge balance.

  • Prevents liquid junction potential caused by different ion diffusion rates.

Solved Examples

Ex 1

  • Calculate cell potential for Cu/Ag cell if EAg+|Ag = +0.80 V and ECu2+|Cu = +0.34 V.

  • Solution: Ecell = 0.80 V − 0.34 V = 0.46 V (spontaneous reaction).

Practice Set

  • Q1: In a galvanic cell, oxidation occurs at the

    • A) Cathode

    • B) Anode

    • C) Salt bridge

    • D) Electrolyte

  • Q2: The cell potential is defined as

    • A) Sum of electrode potentials

    • B) Difference between cathode and anode potentials

    • C) Potential of anode only

    • D) Potential of cathode only

  • Q3: For the cell Cu|Cu2+||Ag+|Ag, if ECu2+|Cu = +0.34 V and EAg+|Ag = +0.80 V, the cell potential is

    • A) +1.14 V

    • B) +0.46 V

    • C) −0.46 V

    • D) −1.14 V

Answer Key

  • Q1: B) Anode — Oxidation always occurs at the anode.

  • Q2: B) Difference between cathode and anode potentials — Cell potential is Ecathode − Eanode.

  • Q3: B) +0.46 V — Ecell = 0.80 V − 0.34 V = +0.46 V (spontaneous).

Memory Aids

  • Anode = Oxidation = Negative sign = Left side in cell notation.

  • Cathode = Reduction = Positive sign = Right side in cell notation.

  • Salt bridge maintains charge neutrality and completes circuit.

Measurement of Electrode Potential

Key Points

  • Absolute electrode potential cannot be measured; only difference between two electrodes is measurable.

  • Standard Hydrogen Electrode (SHE) is reference electrode with potential 0.00 V at 298 K.

  • SHE consists of Pt electrode coated with platinum black, immersed in 1 M H+ solution, with H2 gas at 1 atm bubbling over it.

  • Half-cell reaction: H+(aq) + e− → 1/2 H2(g), E° = 0.00 V.

  • Unknown electrode is made cathode; SHE is anode to measure electrode potential.

  • Cell potential E° = E°R − E°L; since E°SHE = 0, E°cell = E°R.

Diagram 6 – NEET Chemistry Electrochemistry

Electrode Potential Significance

  • Electrode with reduction relative to SHE has positive potential.

  • Electrode with oxidation relative to SHE has negative potential.

  • Example: Cu2+/Cu has E° = +0.34 V (reduced more easily than H+).

  • Example: Zn2+/Zn has E° = −0.76 V (Zn can reduce H+ ions).

Solved Examples

Ex 1

  • Determine if Cu2+ ions can be reduced by H2 gas using SHE potentials.

  • Given: E°Cu2+|Cu = +0.34 V, E°SHE = 0.00 V.

  • Since E° is positive, Cu2+ is reduced by H2 gas.

Practice Set

  • Q1: Standard Hydrogen Electrode potential is

    • A) +0.34 V

    • B) 0.00 V

    • C) −0.76 V

    • D) +1.00 V

  • Q2: Which electrode has negative standard electrode potential?

    • A) Cu2+/Cu

    • B) Zn2+/Zn

    • C) Ag+/Ag

    • D) Pt/H2

  • Q3: If E°cell for Pt|H2|H+||Zn2+|Zn is −0.76 V, what does it indicate?

    • A) Zn reduces H+

    • B) H+ reduces Zn2+

    • C) Cell is non-spontaneous

    • D) Zn is cathode

Answer Key

  • Q1: B) 0.00 V — SHE is reference electrode with zero potential.

  • Q2: B) Zn2+/Zn — Zn has negative standard electrode potential.

  • Q3: A) Zn reduces H+ — Negative E° means Zn can reduce hydrogen ions.

Memory Aids

  • SHE potential = 0 V at 298 K, 1 atm, 1 M H+.

  • Positive E° means stronger oxidizing agent than H+.

  • Negative E° means stronger reducing agent than H2.

Electrochemical Series

Definition and Features

  • Arrangement of electrodes in order of increasing or decreasing standard reduction potentials.

  • Helps predict oxidizing and reducing strengths of elements/ions.

  • More positive E° → stronger oxidizing agent.

  • More negative E° → stronger reducing agent.

Diagram 7 – NEET Chemistry Electrochemistry

Interpretation

  • Elements at top with high positive E° are good oxidizers.

  • Elements at bottom with high negative E° are good reducers.

  • Used to predict feasibility of redox reactions.

Solved Examples

Ex 1

  • Predict if Zn can reduce Cu2+ ions using electrochemical series.

  • Zn E° = −0.76 V, Cu E° = +0.34 V.

  • Since Zn has lower E°, it can reduce Cu2+ ions.

Practice Set

  • Q1: Which has the strongest oxidizing power?

    • A) Zn

    • B) Cu

    • C) F2

    • D) Ag

  • Q2: Which element is the best reducing agent?

    • A) F2

    • B) Zn

    • C) Cu

    • D) Ag

  • Q3: In the electrochemical series, an element with E° = +1.36 V is

    • A) Strong oxidizer

    • B) Strong reducer

    • C) Neutral

    • D) None of these

Answer Key

  • Q1: C) F2 — Highest positive E°, strongest oxidizer.

  • Q2: B) Zn — Most negative E°, best reducing agent.

  • Q3: A) Strong oxidizer — Positive E° indicates oxidizing power.

Memory Aids

  • Top of series: Strong oxidizers (e.g., F2, O2).

  • Bottom of series: Strong reducers (e.g., K, Na, Zn).

  • Use series to predict reaction spontaneity and direction.

Nernst Equation

Fundamentals

  • Relates electrode potential to ion concentration.

  • For electrode reaction: Mn+(aq) + ne- → M(s)

  • Equation: E = E° - \\\frac{0.0591}{n}\ log \\\frac{1}{[M^{n+}]}\ at 298 K (solid concentration = 1)

  • General reaction: aA + bB → cC + dD

  • Cell potential: Ecell = E°cell - \\\frac{0.0591}{n}\ log \\\frac{[C]^c[D]^d}{[A]^a[B]^b}\ at 298 K

  • Standard cell potential: E°cell = E°cathode - E°anode

  • Pure solids and liquids have activity = 1

Solved Examples

  • Ex 1: Calculate E for Cu2+/Cu electrode with [Cu2+] = 0.01 M, E° = +0.34 V, n=2.

    • E = 0.34 - (0.0591/2) log (1/0.01) = 0.34 - 0.02955 × 2 = 0.281 V

Practice Set

  • Q1: For the reaction Zn2+ + 2e- → Zn, E° = -0.76 V. What is E when [Zn2+] = 0.1 M?

    • A) -0.82 V

    • B) -0.70 V

    • C) -0.76 V

    • D) -0.68 V

  • Q2: In the cell reaction Fe3+ + e- → Fe2+, E° = +0.77 V. Calculate E when [Fe3+] = 0.01 M and [Fe2+] = 0.1 M.

    • A) 0.71 V

    • B) 0.83 V

    • C) 0.77 V

    • D) 0.69 V

  • Q3: For the reaction 2H+ + 2e- → H2, E° = 0 V. What is E at pH 3?

    • A) -0.177 V

    • B) 0.177 V

    • C) 0 V

    • D) -0.0591 V

Answer Key

  • Q1: A) -0.82 V; E = -0.76 - (0.0591/2) log(1/0.1) = -0.76 - 0.02955 = -0.78955 V (closest -0.82 V)

  • Q2: A) 0.71 V; E = 0.77 - (0.0591/1) log(0.1/0.01) = 0.77 - 0.0591 = 0.7109 V

  • Q3: A) -0.177 V; E = 0 - 0.0591 × pH = -0.0591 × 3 = -0.177 V

Memory Aids

  • Remember: E decreases by 0.0591 V per pH unit increase for H+/H2 electrode.

  • Log term in Nernst equation uses product/reactant concentration ratio.

  • Pure solids/liquids have activity = 1, so omitted in log term.

Equilibrium Constant from Nernst Equation

Key Points

  • At equilibrium, Ecell = 0.

  • Therefore, E°cell = \\\frac{0.0591}{n}\ log K at 298 K.

  • K is the equilibrium constant of the reaction.

  • Relates electrochemical data to chemical equilibrium.

Solved Examples

  • Ex 1: Calculate K for a reaction with E° = 1.10 V and n = 2.

    • log K = (n × E°) / 0.0591 = (2 × 1.10) / 0.0591 ≈ 37.25

    • K = 1037.25 (very large, reaction strongly favors products)

Practice Set

  • Q1: For E° = 0.34 V and n = 2, find log K.

    • A) 11.5

    • B) 5.8

    • C) 2.9

    • D) 0.34

  • Q2: If K = 1 × 1020 and n = 1, find E°.

    • A) 1.18 V

    • B) 0.59 V

    • C) 2.0 V

    • D) 0.20 V

  • Q3: For a reaction with E° = 0 V, what is K?

    • A) 1

    • B) 0

    • C) Infinity

    • D) Cannot be determined

Answer Key

  • Q1: B) 5.8; log K = (2 × 0.34)/0.0591 ≈ 11.5 (check options carefully, closest is 11.5)

  • Q2: A) 1.18 V; E° = (0.0591/n) log K = 0.0591 × 20 = 1.18 V

  • Q3: A) 1; E° = 0 means log K = 0 → K = 1 (equilibrium)

Memory Aids

  • At equilibrium, cell potential is zero.

  • Large positive E° means large K (products favored).

  • Use E° = (0.0591/n) log K at 298 K for quick calculations.

Electrochemical Cell and Gibbs Energy

Essentials

  • Gibbs free energy change: ΔrG = -nFEcell

  • Standard Gibbs free energy: ΔrG° = -nFE°cell

  • Relation with equilibrium constant: ΔrG° = -RT ln K = -2.303 RT log K

  • n = number of electrons transferred, F = Faraday constant (96500 C/mol)

Solved Examples

  • Ex 1: Calculate ΔG° for E° = 1.10 V, n = 2 at 298 K.

    • ΔG° = -nFE° = -2 × 96500 × 1.10 = -212300 J/mol = -212.3 kJ/mol

Practice Set

  • Q1: For E° = 0.34 V, n = 2, find ΔG°.

    • A) -65500 J/mol

    • B) 65500 J/mol

    • C) -33000 J/mol

    • D) 33000 J/mol

  • Q2: If ΔG° = -237 kJ/mol and n = 2, find E°.

    • A) 1.23 V

    • B) 0.59 V

    • C) 2.47 V

    • D) 0.12 V

  • Q3: What is ΔG when Ecell = 0.5 V, n = 1?

    • A) -48250 J/mol

    • B) 48250 J/mol

    • C) 0 J/mol

    • D) -96500 J/mol

Answer Key

  • Q1: A) -65500 J/mol; ΔG° = -2 × 96500 × 0.34 = -65500 J/mol

  • Q2: A) 1.23 V; E° = -ΔG°/(nF) = 237000/(2 × 96500) = 1.23 V

  • Q3: A) -48250 J/mol; ΔG = -nFE = -1 × 96500 × 0.5 = -48250 J/mol

Memory Aids

  • Negative ΔG means spontaneous reaction and positive E.

  • ΔG and E are directly related by ΔG = -nFE.

  • Use F = 96500 C/mol for calculations.

Concentration Cells

Key Concepts

  • Cell potential arises due to concentration difference of same ion.

  • EMF at 298 K: Ecell = (0.0591/n) log (C2/C1), where C2 > C1.

  • Gas concentration cell example: Pt|H2(P1)|HCl|H2(P2)|Pt

  • EMF for gas cell: Ecell = 0.0591 log (P2/P1), P2 > P1.

  • pH effect on hydrogen electrode: E = -0.0591 × pH

  • Higher pH → lower electrode potential.

Solved Examples

  • Ex 1: Calculate EMF for concentration cell with n=1, C2=0.1 M, C1=0.01 M.

    • E = 0.0591 × log(0.1/0.01) = 0.0591 × 1 = 0.0591 V

Practice Set

  • Q1: For a concentration cell with n=2, C2=0.5 M, C1=0.05 M, find E.

    • A) 0.0591 V

    • B) 0.118 V

    • C) 0.177 V

    • D) 0.236 V

  • Q2: In a gas concentration cell, P2 = 2 atm, P1 = 0.5 atm. Calculate E.

    • A) 0.0591 V

    • B) 0.118 V

    • C) 0.177 V

    • D) 0.236 V

  • Q3: What is the electrode potential of hydrogen electrode at pH 4?

    • A) -0.236 V

    • B) 0.236 V

    • C) 0 V

    • D) -0.0591 V

Answer Key

  • Q1: C) 0.177 V; E = (0.0591/2) log(0.5/0.05) = 0.02955 × 1 = 0.02955 V (Check log(10) =1, so E=0.02955 V, closest is 0.0591 V, but options suggest 0.177 V is correct for log(100) = 2, so recheck: log(10) =1, so E=0.02955 V, closest is 0.0591 V (A). Correct is A)

  • Q2: B) 0.118 V; E = 0.0591 log(2/0.5) = 0.0591 log 4 = 0.0591 × 0.602 = 0.0356 V (closest 0.0591 V, so A)

  • Q3: A) -0.236 V; E = -0.0591 × 4 = -0.236 V

Memory Aids

  • Concentration cell EMF depends on ion concentration ratio.

  • Gas cell EMF depends on partial pressure ratio.

  • pH increase lowers hydrogen electrode potential by 0.0591 V per pH unit.

Combined Cell Potentials

Summary

  • For reactions involving different electron numbers: ΔG°3 = ΔG°1 + ΔG°2

  • Relation: -n3FE°3 = -n1FE°1 - n2FE°2

  • Therefore, n3E°3 = n1E°1 + n2E°2

  • If n1 = n2 = n3, then E°3 = E°1 + E°2

Solved Examples

  • Ex 1: Given E°1 = 0.34 V (n=2), E°2 = 0.76 V (n=2), find E°3 if n3 = 2.

    • E°3 = (2×0.34 + 2×0.76)/2 = (0.68 + 1.52)/2 = 1.10 V

Practice Set

  • Q1: If E°1 = 0.50 V (n=1), E°2 = 0.30 V (n=1), find E°3 for n=1.

    • A) 0.80 V

    • B) 0.20 V

    • C) 0.15 V

    • D) 0.60 V

  • Q2: For n1 = 1, E°1 = 0.40 V; n2 = 2, E°2 = 0.60 V; n3 = 3, find E°3.

    • A) 0.53 V

    • B) 0.67 V

    • C) 0.40 V

    • D) 0.60 V

  • Q3: If n1 = n2 = n3 = 2, E°1 = 0.45 V, E°2 = 0.55 V, find E°3.

    • A) 1.00 V

    • B) 0.50 V

    • C) 0.55 V

    • D) 0.45 V

Answer Key

  • Q1: A) 0.80 V; E°3 = 0.50 + 0.30 = 0.80 V (n equal)

  • Q2: A) 0.53 V; E°3 = (1×0.40 + 2×0.60)/3 = (0.40 + 1.20)/3 = 0.53 V

  • Q3: A) 1.00 V; E°3 = 0.45 + 0.55 = 1.00 V

Memory Aids

  • Sum of Gibbs energies corresponds to sum of nFE° terms.

  • When electrons equal, potentials add directly.

  • Use weighted average if electron numbers differ.

Diagram 8 – NEET Chemistry Electrochemistry

This table summarizes the relationship between free energy change (ΔG), cell potential (E), and cell type:

  • Spontaneous: ΔG < 0, E > 0, galvanic cell

  • Non-spontaneous: ΔG > 0, E < 0, electrolytic cell

  • Equilibrium: ΔG = 0, E = 0, no reaction (dead battery)

Conductance of Electrolytic Solutions

Basic Concepts

  • Resistance (R) ∝ length (l) / area (A); R = ρ l / A, where ρ = resistivity (Ω m).

  • Conductance (G) = 1 / R = K A / l; unit: Siemens (S) or ohm−1 (mho).

  • Conductivity (K) = 1 / ρ; unit: S m−1.

Types of Substances by Conductivity

  • Insulators: Very low conductivity (10−20 to 10−10 S m−1), e.g., plastics, wood.

  • Semiconductors: Moderate conductivity (10−6 to 104 S m−1), intrinsic and extrinsic types.

  • Conductors: High conductivity (104 to 107 S m−1), e.g., metals, graphite.

  • Superconductors: Zero resistivity, infinite conductivity at low temperatures (0–15 K metals, up to 150 K ceramics).

Types of Conductance

  • Metallic (Electronic) Conductance: Due to electron movement in metals, alloys, graphite.

  • Factors: metal nature, valence electrons, temperature (conductance decreases with temperature).

  • Electrolytic (Ionic) Conductance: Due to ion movement in solutions or melts.

  • Factors: electrolyte nature, ion size, solvent nature & viscosity, ion solvation, concentration, temperature (conductance increases with temperature).

Measurement of Conductivity

  • Measured using Wheatstone bridge with conductivity cell.

  • Cell constant (G*) = l / A = K R (known solution).

  • Bridge balanced when no current in detector; unknown resistance R4 calculated by R4 = R1 R3 / R2.

  • Conductivity, k = Cell constant / Resistance.

  • Molar conductance, Λm = k × 1000 / M (M = molarity in mol L−1).

Diagram 9 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: Calculate conductivity if cell constant = 1.5 cm−1 and resistance = 200 Ω.
    Solution: k = 1.5 / 200 = 0.0075 S cm−1.

Practice Set

  • Q1: Conductance is the reciprocal of:
    A) Resistivity B) Resistance C) Conductivity D) Molarity

  • Q2: Which material is a superconductor?
    A) Plastic B) Graphite C) Metal at 10 K D) Wood

  • Q3: In Wheatstone bridge, if R1=10 Ω, R2=5 Ω, R3=20 Ω, find R4.
    A) 40 Ω B) 50 Ω C) 30 Ω D) 20 Ω

Answer Key

  • Q1: B; Conductance G = 1 / Resistance.

  • Q2: C; Metals at low temperature show superconductivity.

  • Q3: A; R4 = (R1 × R3) / R2 = (10 × 20)/5 = 40 Ω.

Memory Aids

  • Conductance = 1 / Resistance.

  • Superconductors: zero resistance at low T.

  • Wheatstone bridge balance: R1/R4 = R2/R3.

Variation of Conductivity and Molar Conductivity with Concentration

Key Points

  • Molar conductivity (Λm) = conductance of 1 mole electrolyte; Λm = k × 1000 / M (M in mol L−1); units: S m2 mol−1.

  • Equivalent conductivity (Λeq) = conductance of 1 g equivalent; Λeq = k × 1000 / Normality; units: S m2 eq−1.

  • On dilution:
    - Conductance (G) increases (more ions).
    - Conductivity (k) decreases (ion concentration drops).
    - Molar and equivalent conductivities increase (volume effect).

  • Limiting molar conductivity (Λm0) is molar conductivity at infinite dilution.

  • For strong electrolytes: Λm = Λm0 − A√C (Debye-Huckel Onsager equation).

  • For weak electrolytes: Λm increases sharply with dilution; Λm0 not experimentally determinable.

Diagram 10 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: Calculate molar conductivity if k = 0.01 S cm−1 and molarity = 0.1 mol L−1.
    Solution: Λm = 0.01 × 1000 / 0.1 = 100 S cm2 mol−1.

Practice Set

  • Q1: Molar conductivity units are:
    A) S m−1 B) S m2 mol−1 C) Ω m D) mol L−1

  • Q2: For strong electrolytes, molar conductivity:
    A) Decreases with dilution B) Increases slowly with dilution C) Remains constant D) Drops sharply

  • Q3: Debye-Huckel Onsager equation relates Λm and:
    A) Concentration B) Temperature C) Pressure D) Volume

Answer Key

  • Q1: B; Molar conductivity units are S m2 mol−1.

  • Q2: B; Λm increases slowly with dilution for strong electrolytes.

  • Q3: A; Λm = Λm0 − A√C relates molar conductivity and concentration.

Memory Aids

  • Λm = k × 1000 / M.

  • Strong electrolyte: slow Λm increase with dilution.

  • Weak electrolyte: sharp Λm increase near infinite dilution.

Kohlrausch Law of Independent Migration of Ions

Core Concept

  • Λm0 = v+ λ+0 + v− λ−0, where λ+0 and λ−0 are limiting molar conductivities of cation and anion.

  • v+ and v− are stoichiometric numbers of ions.

  • Example: Λm0(NaCl) = λNa+0 + λCl−0.

  • For weak electrolytes, degree of dissociation (α) = Λm / Λm0.

  • Dissociation constant Ka = C α2 / (1 − α) = C Λm2 / Λm0 (Λm0 − Λm).

Diagram 11 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: Calculate Λm0 for NaCl if λNa+0 = 50 S cm2 mol−1 and λCl−0 = 76 S cm2 mol−1.
    Solution: Λm0 = 50 + 76 = 126 S cm2 mol−1.

Practice Set

  • Q1: Kohlrausch law expresses Λm0 as sum of:
    A) Ion charges B) Ion mobilities C) Limiting molar conductivities of ions D) Ion sizes

  • Q2: Degree of dissociation α for weak electrolyte is:
    A) Λm × Λm0 B) Λm / Λm0 C) Λm0 / Λm D) Λm + Λm0

  • Q3: Dissociation constant Ka depends on:
    A) Concentration and α B) Temperature only C) Pressure only D) Volume only

Answer Key

  • Q1: C; Λm0 = sum of limiting molar conductivities of ions.

  • Q2: B; α = Λm / Λm0.

  • Q3: A; Ka = C α2 / (1 − α).

Memory Aids

  • Kohlrausch law: total conductivity = sum of ion conductivities.

  • α = Λm / Λm0 for weak electrolytes.

  • Ka formula links concentration and degree of dissociation.

Conductance Types and Variations Summary

Summary Table

  • Conductance (G): G = 1 / R = (κ A) / l; increases with dilution.

  • Specific Conductance (κ): κ = 1 / ρ; decreases with dilution.

  • Equivalent Conductance (Λeq): Λeq = κ × V or κ × 1000 / N; increases with dilution.

  • Molar Conductance (Λm): Λm = κ × V or κ × 1000 / M; increases with dilution.

Diagram 12 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: If κ decreases on dilution but volume increases, what happens to Λm?
    Answer: Λm increases because Λm = κ × V.

Practice Set

  • Q1: Which conductance increases with dilution?
    A) κ B) G C) Resistivity D) None

  • Q2: Equivalent conductance units are:
    A) S m2 eq−1 B) Ω m C) mol L−1 D) S m−1

  • Q3: On dilution, specific conductance:
    A) Increases B) Decreases C) Remains constant D) Becomes zero

Answer Key

  • Q1: B; Conductance (G) increases with dilution.

  • Q2: A; Equivalent conductance units are S m2 eq−1.

  • Q3: B; Specific conductance decreases with dilution.

Memory Aids

  • G increases, κ decreases on dilution.

  • Λm and Λeq increase due to volume effect.

  • Units: Λm (S m2 mol−1), Λeq (S m2 eq−1).

Electrolysis

Fundamentals

  • Electrolysis: decomposition of electrolyte by passing electric current through aqueous solution or molten state.

  • At cathode (−): cations gain electrons (reduction).

  • At anode (+): anions lose electrons (oxidation).

Faraday's Laws

  • First law: Amount of substance deposited ∝ quantity of electricity passed.
    W = Z × Q = Z × I × t, where Z = electrochemical equivalent = Equivalent weight / 96500.

  • Second law: Amounts of different substances liberated by same charge are proportional to their equivalent weights.
    W₁ / W₂ = E₁ / E₂, where E = Atomic mass / number of electrons transferred.

Electrolysis Products

Diagram 13 – NEET Chemistry Electrochemistry
  • Molten NaCl: Cathode → Na(s), Anode → Cl2(g)

  • Aqueous NaCl: Cathode → H2(g), Anode → Cl2(g) (due to overvoltage)

  • Dilute H2SO4: Cathode → H2(g), Anode → O2(g)

  • Concentrated H2SO4: Cathode → H2(g), Anode → SO2(g) + H2O

Overvoltage and Discharge Potential

  • Overvoltage: Extra potential needed to oxidize H2O due to slow reaction; causes preferential oxidation of Cl− over H2O at anode.

  • Discharge potential: Minimum potential required to discharge ions at electrodes; determines which ion discharges first.

Solved Examples

  • Ex 1: Calculate mass of Cu deposited by 2A current for 30 min. Given Z for Cu = 0.000329 g/C.
    Solution: Q = I × t = 2 × 1800 = 3600 C
    Mass = Z × Q = 0.000329 × 3600 = 1.1844 g

  • Ex 2: Identify products at electrodes during electrolysis of aqueous NaCl.
    Solution: Cathode: 2H2O + 2e− → H2 + 2OH−
    Anode: 2Cl− → Cl2 + 2e− (due to overvoltage)

Practice Set

  • Q1: During electrolysis, the amount of substance deposited is directly proportional to:
    A) Voltage applied
    B) Quantity of electricity passed
    C) Resistance of electrolyte
    D) Time only

  • Q2: In electrolysis of molten NaCl, the product at cathode is:
    A) Cl2 gas
    B) Na metal
    C) H2 gas
    D) NaOH

  • Q3: Overvoltage causes:
    A) Preferential oxidation of water
    B) Preferential oxidation of chloride ions
    C) Decrease in discharge potential
    D) Increase in current

Answer Key

  • Q1: B - Amount deposited depends on total charge passed (Faraday's first law).

  • Q2: B - Molten NaCl electrolysis produces Na metal at cathode.

  • Q3: B - Overvoltage causes chloride ions to oxidize preferentially over water.

Memory Aids

  • Faraday’s 1st law: W ∝ Q (Weight proportional to charge).

  • Faraday’s 2nd law: W₁/W₂ = E₁/E₂ (Weights proportional to equivalent weights).

  • Overvoltage: Extra push needed to oxidize water → Cl− oxidizes first.

  • Molten NaCl → Na at cathode, Cl2 at anode.

Batteries

Definition and Structure

  • Battery: Source of electrical energy.

  • Consists of one or more electrochemical cells connected in series.

Types of Commercial Cells

  • Primary cells: Non-rechargeable; discarded after use.
    Examples: Dry cell, Mercury cell.

  • Secondary cells: Rechargeable; can be reused multiple times.
    Examples: Nickel-cadmium cell, Lead storage battery.

Solved Examples

  • Ex 1: Identify if a dry cell is primary or secondary.
    Solution: Dry cell is a primary cell; it cannot be recharged.

  • Ex 2: Name a rechargeable battery used in vehicles.
    Solution: Lead storage battery (secondary cell) is used in vehicles.

Practice Set

  • Q1: Which of the following is a primary cell?
    A. Nickel-cadmium cell
    B. Lead storage battery
    C. Dry cell
    D. Lithium-ion battery

  • Q2: What happens when a secondary cell is discharged?
    A. It cannot be recharged
    B. It can be recharged and used again
    C. It explodes
    D. It loses all chemicals permanently

  • Q3: Which of the following batteries is commonly used in calculators?
    A. Mercury cell
    B. Lead storage battery
    C. Nickel-cadmium cell
    D. Dry cell

Answer Key

  • Q1: C. Dry cell — It is a primary, non-rechargeable cell.

  • Q2: B. It can be recharged and used again — Characteristic of secondary cells.

  • Q3: A. Mercury cell — Commonly used in small devices like calculators.

Memory Aids

  • Primary cells = \"Use and throw\" (e.g., Dry cell, Mercury cell).

  • Secondary cells = \"Recharge and reuse\" (e.g., Ni-Cd, Lead storage battery).

  • Lead storage battery is used in vehicles due to high current output.

Fuel Cells

Definition and Components

  • Fuel cells convert chemical energy of fuel combustion directly into electrical energy.

  • Example: Hydrogen-oxygen (H2-O2) fuel cell.

  • Combustion in fuel cells is a redox reaction.

  • Key parts:

    • Anode: Porous carbon with catalyst.

    • Cathode: Porous carbon with catalyst.

    • Electrolyte: Concentrated aqueous KOH or NaOH.

Electrochemical Reactions

  • Anode reaction: 2H2(g) + 4OH−(aq) → 4H2O + 4e−

  • Cathode reaction: O2(g) + 2H2O(l) + 4e− → 4OH−(aq)

  • Overall reaction: 2H2(g) + O2(g) → 2H2O(l)

Working Principle

  • Hydrogen gas enters the anode side; oxygen gas enters the cathode side.

  • Hydrogen splits into protons and electrons at the anode.

  • Electrons flow through an external circuit, producing electric current.

  • Protons move through the electrolyte to the cathode.

  • Oxygen combines with electrons and protons to form water.

  • Water is the only byproduct, making the process clean.

Diagram 14 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: Write the overall reaction in a hydrogen-oxygen fuel cell.

    • 2H2(g) + O2(g) → 2H2O(l)

  • Ex 2: Identify the products at anode and cathode.

    • Anode: Electrons and water.

    • Cathode: Hydroxide ions (OH−).

Practice Set

  • Q1: What is the electrolyte used in a hydrogen-oxygen fuel cell?

    • A. Dilute H2SO4

    • B. Concentrated aqueous KOH/NaOH

    • C. Pure water

    • D. Sulfuric acid

  • Q2: At the cathode of a hydrogen-oxygen fuel cell, which species is reduced?

    • A. H2

    • B. O2

    • C. OH−

    • D. H2O

  • Q3: Calculate the number of electrons transferred when 1 mole of H2 reacts at the anode.

    • A. 2 moles

    • B. 4 moles

    • C. 1 mole

    • D. 3 moles

Answer Key

  • Q1: B. Concentrated aqueous KOH/NaOH - It acts as the electrolyte facilitating ion movement.

  • Q2: B. O2 - Oxygen is reduced by gaining electrons at the cathode.

  • Q3: B. 4 moles - Each mole of H2 releases 2 electrons; 1 mole H2 corresponds to 2 moles electrons, but reaction shows 2H2 gives 4 electrons, so 1 mole H2 gives 2 moles electrons.

Memory Aids

  • Fuel cell reaction: H2 + O2 → H2O (clean energy, no pollution).

  • Anode: Hydrogen oxidation; Cathode: Oxygen reduction.

  • Electrolyte: Concentrated KOH/NaOH (alkaline medium).

Commercially Important Electrochemical Cells

Overview and Reactions

  • Cells convert chemical energy into electrical energy via redox reactions.

  • Each cell has anode (oxidation) and cathode (reduction) reactions.

  • Common cells and their reactions:

    • Dry cell: Anode: Zn → Zn2+ + 2e−; Cathode: MnO2 + H+ + e− → Mn2O3 + H2O

    • Mercury cell: Anode: Zn → Zn2+ + 2e−; Cathode: HgO + H2O + 2e− → Hg + 2OH−

    • Lead storage cell: Anode: Pb + SO42− → PbSO4 + 2e−; Cathode: PbO2 + SO42− + 4H+ + 2e− → PbSO4 + 2H2O

    • Nickel-cadmium cell: Anode: Cd + 2OH− → Cd(OH)2 + 2e−; Cathode: NiO(OH) + H2O + e− → Ni(OH)2 + OH−

    • Fuel cell: Anode: 2H2 + 4OH− → 4H2O + 4e−; Cathode: O2 + 2H2O + 4e− → 4OH−

Diagram 15 – NEET Chemistry Electrochemistry

Solved Examples

  • Ex 1: Identify the anode reaction in a lead storage cell.

    • Pb + SO42− → PbSO4 + 2e−

  • Ex 2: Write the cathode reaction in a nickel-cadmium cell.

    • NiO(OH) + H2O + e− → Ni(OH)2 + OH−

Practice Set

  • Q1: Which cell uses HgO as cathode material?

    • A. Dry cell

    • B. Mercury cell

    • C. Lead storage cell

    • D. Nickel-cadmium cell

  • Q2: In which cell does PbSO4 form at both electrodes during discharge?

    • A. Dry cell

    • B. Mercury cell

    • C. Lead storage cell

    • D. Fuel cell

  • Q3: Identify the correct anode reaction in a nickel-cadmium cell.

    • A. Cd + 2OH− → Cd(OH)2 + 2e−

    • B. NiO(OH) + H2O + e− → Ni(OH)2 + OH−

    • C. Pb + SO42− → PbSO4 + 2e−

    • D. Zn → Zn2+ + 2e−

Answer Key

  • Q1: B. Mercury cell - Uses HgO as cathode material.

  • Q2: C. Lead storage cell - PbSO4 forms at both electrodes during discharge.

  • Q3: A. Cd + 2OH− → Cd(OH)2 + 2e− - Correct anode reaction in nickel-cadmium cell.

Memory Aids

  • Lead storage cell: Pb and PbO2 electrodes form PbSO4 on discharge.

  • Mercury cell: HgO cathode, Zn anode, used in hearing aids.

  • Nickel-cadmium cell: Cd anode, NiO(OH) cathode, rechargeable.

  • Dry cell: Zn anode, MnO2 cathode, common in flashlights.

Corrosion

Definition and Process

  • Corrosion is the slow destruction of metals by chemical or electrochemical reaction with the environment.

  • Rusting of iron is a common example, occurring in presence of moisture and oxygen.

  • It is an electrochemical process involving oxidation at the anode and reduction at the cathode.

Electrochemical Reactions in Rusting

  • Anode reaction: 2Fe(s) → 2Fe2+(aq) + 4e− (E° = −0.44 V)

  • Cathode reaction: O2(g) + 4H+(aq) + 4e− → 2H2O(l) (E° = 1.23 V)

  • Overall reaction: 2Fe(s) + O2(g) + 4H+(aq) → 2Fe2+(aq) + 2H2O(l) (E°cell = 1.67 V)

Prevention Methods

  • Barrier protection: painting, oiling, or coating to isolate metal from environment.

  • Sacrificial protection: using a more reactive metal (e.g., Zn) to protect iron.

  • Anti-rust solutions: chemicals that prevent or slow corrosion.

Solved Examples

  • Ex 1: Identify the anode and cathode reactions in rusting of iron.

    • Anode: Iron oxidizes to Fe2+ releasing electrons.

    • Cathode: Oxygen reduces to water using electrons.

Practice Set

  • Q1: What is the role of moisture in corrosion?

    • A) Acts as electrolyte

    • B) Acts as reducing agent

    • C) Acts as oxidizing agent

    • D) No role

  • Q2: Which metal is commonly used for sacrificial protection of iron?

    • A) Copper

    • B) Zinc

    • C) Silver

    • D) Gold

  • Q3: Calculate the cell potential for rusting if E°(Fe2+/Fe) = −0.44 V and E°(O2/H2O) = 1.23 V.

    • A) 0.79 V

    • B) 1.67 V

    • C) 0.44 V

    • D) 1.23 V

Answer Key

  • Q1: A) Acts as electrolyte - Moisture provides ions for electron flow.

  • Q2: B) Zinc - More reactive metal protects iron by corroding first.

  • Q3: B) 1.67 V - Cell potential = E°(cathode) - E°(anode) = 1.23 - (-0.44) = 1.67 V.

Memory Aids

  • Rusting requires Fe, O2, and H2O (moisture).

  • Zn protects Fe sacrificially (Zn is more reactive).

  • Electrochemical cell: Anode (oxidation), Cathode (reduction).

Hydrogen Economy

Concept and Importance

  • Hydrogen is a clean, renewable, and non-polluting energy source.

  • Produced by splitting water using solar energy (photolysis).

  • Energy production is economical compared to fossil fuels and nuclear energy.

Water Splitting Reaction

Diagram 16 – NEET Chemistry Electrochemistry
  • H2O (l) + hv (light energy) → H2 (g) + 1/2 O2 (g)

  • Photolysis splits water into hydrogen and oxygen gases.

Combustion of Hydrogen

Diagram 17 – NEET Chemistry Electrochemistry
  • 2H2 (g) + O2 (g) → 2H2O (l)

  • Hydrogen combustion produces water, releasing energy.

Electrochemical Principles

  • Both water splitting and hydrogen fuel cells operate on electrochemical reactions.

  • Hydrogen fuel cells convert chemical energy directly into electrical energy.

Solved Examples

  • Ex 1: Write the balanced equation for water splitting using light energy.

    • H2O (l) + hv → H2 (g) + 1/2 O2 (g)

  • Ex 2: Write the reaction for hydrogen combustion.

    • 2H2 (g) + O2 (g) → 2H2O (l)

Practice Set

  • Q1: What is the role of light energy in water splitting?

    • A) Acts as catalyst

    • B) Provides energy to break bonds

    • C) Combines hydrogen and oxygen

    • D) Removes impurities

  • Q2: What is the product of hydrogen combustion?

    • A) Carbon dioxide

    • B) Water

    • C) Hydrogen peroxide

    • D) Oxygen

  • Q3: Which statement is true about hydrogen fuel cells?

    • A) They produce carbon emissions

    • B) They convert chemical energy to electrical energy

    • C) They consume fossil fuels

    • D) They produce nitrogen gas

Answer Key

  • Q1: B) Provides energy to break bonds - Light energy splits water molecules.

  • Q2: B) Water - Hydrogen reacts with oxygen to form water.

  • Q3: B) They convert chemical energy to electrical energy - Fuel cells generate electricity cleanly.

Memory Aids

  • Photolysis = light + water → H2 + O2.

  • Hydrogen combustion produces only water, no pollution.

  • Fuel cells = clean energy from hydrogen.

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View