NEET UG . NEET Chemistry . Chemistry . The P Block Elements Group 15 to 18

Chapter 21: The p-Block Elements (Group 15 to 18)

Ch 21

NEET Chemistry

NEET UG

"

Group 15 Elements

General Characteristics

  • Elements: N, P, As, Sb, Bi, Moscovium (synthetic, chemistry not well-known)

  • General electronic configuration: ns2np3

  • Known as pnictogens

Physical Properties

  • Atomic radii increase down the group; smaller than group 14 due to higher nuclear charge

  • Melting point increases from N to As, then decreases due to inert pair effect

  • Metallic character increases down the group

  • Ionization enthalpy decreases down the group; higher than group 14 due to half-filled p-orbital stability

  • Electronegativity decreases down the group

  • Allotropy present in all except nitrogen

Chemical Properties

  • Oxidation states: +3 state stability increases down the group; +5 state stability decreases due to inert pair effect

  • Halides: General formula EX3 or EX5

  • Halide stability order: NF3 > NCl3 > NBr3 (due to size differences)

  • Lewis acid strength: PCl3 > NBr3 > NCl3 > NF3 (decreases with increasing halogen electronegativity)

  • Halide bond angle: PF3 < PCl3 < PBr3 < PI3 (due to decreasing bond pair repulsions)

Hydrides (EH3)

  • Bond angle trend: NH3 > PH3 > AsH3 > SbH3 > BiH3

  • Basicity: NH3 > PH3; AsH3, SbH3, BiH3 are not basic

  • Boiling point order: PH3 < AsH3 < NH3 < SbH3 < BiH3

  • Melting point order: PH3 < AsH3 < SbH3 < NH3

  • Thermal stability: NH3 > PH3 > AsH3 > SbH3 > BiH3

  • Reducing character: NH3 < PH3 < AsH3 < SbH3 < BiH3

  • Solubility in water: NH3, PH3 soluble; AsH3, SbH3, BiH3 insoluble

Oxides

  • General formula: E2O3 or E2O5

  • Acidic strength of trioxides: N2O3 > P4O6 > As4O6 > Sb4O6 (decreases with decreasing electronegativity)

Oxides of Nitrogen

  • Sequence by increasing oxidation number: N2O (neutral), NO (neutral), N2O3, N2O4, N2O5

Reactivity with Metals

  • Form binary compounds with metals exhibiting -3 oxidation state, e.g., Ca3N2, Ca3P2, Na3As

Diagram 1 – NEET Chemistry The p-Block Elements (Group 15 to 18)Diagram 2 – NEET Chemistry The p-Block Elements (Group 15 to 18)Diagram 3 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Predict the oxidation state stability trend in group 15 elements.
    - +3 state stability increases down the group due to inert pair effect.
    - +5 state stability decreases down the group.

  • Ex 2: Arrange the hydrides NH3, PH3, AsH3 in order of basicity.
    - NH3 > PH3 > AsH3 (AsH3 is weakly basic or non-basic).

  • Ex 3: Write the formula of the binary compound formed between calcium and nitrogen.
    - Ca3N2 (calcium nitride).

Practice Set

  • Q1: Which element in group 15 has the highest electronegativity?
    A. Nitrogen
    B. Phosphorus
    C. Arsenic
    D. Bismuth

  • Q2: Which hydride has the highest boiling point?
    A. PH3
    B. NH3
    C. AsH3
    D. SbH3

  • Q3: Which oxide of nitrogen is neutral?
    A. N2O3
    B. NO2
    C. N2O
    D. N2O5

Answer Key

  • Q1: A. Nitrogen
    - Highest electronegativity due to smallest atomic size and highest nuclear charge.

  • Q2: B. NH3
    - Strong hydrogen bonding leads to highest boiling point.

  • Q3: C. N2O
    - N2O and NO are neutral oxides of nitrogen.

Memory Aids

  • Oxidation state trend: +3 state stability increases down group due to inert pair effect.

  • Hydride boiling point: NH3 highest due to hydrogen bonding.

  • Halide stability: NF3 > NCl3 > NBr3 (size difference effect).

Dinitrogen

Preparation of Nitrogen Gas (N2)

  • Ammonium chloride reacts with sodium nitrite:
    NH4Cl + NaNO2 → N2 + 2H2O + NaCl

  • Thermal decomposition of ammonium dichromate:
    (NH4)2Cr2O7 → Cr2O3 + N2 + 4H2O

  • Thermal decomposition of barium azide:
    Ba(N3)2 → Ba + 3N2

Chemical Properties of Nitrogen

  • Reacts with lithium to form lithium nitride:
    N2 + 6Li → 2Li3N

  • Reacts with magnesium to form magnesium nitride:
    N2 + 3Mg → Mg3N2

  • Reacts with oxygen at high temperature to form nitric oxide:
    N2 + O2 → 2NO (at high temperature)

  • Haber process for ammonia synthesis:
    N2 + 3H2 ⇌ 2NH3 (high pressure, temperature, catalyst)
    ΔH = -92 kJ/mol (exothermic)

Diagram 4 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the balanced equation for the reaction of nitrogen with lithium.
    Solution: N2 + 6Li → 2Li3N

  • Ex 2: Identify the product when nitrogen reacts with oxygen at high temperature.
    Solution: Nitric oxide (NO) is formed: N2 + O2 → 2NO

Practice Set

  • Q1: Which of the following is a method to prepare nitrogen gas?
    A. Thermal decomposition of ammonium dichromate
    B. Electrolysis of water
    C. Reaction of hydrogen with oxygen
    D. Combustion of methane

  • Q2: What is the product when nitrogen reacts with magnesium?
    A. MgN
    B. Mg3N2
    C. Mg2N3
    D. MgNO3

  • Q3: In the Haber process, which condition is NOT used?
    A. High pressure
    B. High temperature
    C. Catalyst
    D. Low pressure

Answer Key

  • Q1: A - Thermal decomposition of ammonium dichromate produces nitrogen gas.

  • Q2: B - Magnesium reacts with nitrogen to form magnesium nitride, Mg3N2.

  • Q3: D - Low pressure is not used; high pressure is essential in the Haber process.

Memory Aids

  • \"Li and Mg form nitrides with N2\" - remember alkali and alkaline earth metals react with nitrogen.

  • Haber process: N2 + 3H2 → 2NH3, high pressure & temperature, catalyst needed.

  • Decomposition of ammonium dichromate gives \"Cr2O3 + N2 + H2O\" - remember as a classic lab demonstration.

Ammonia Preparation

Laboratory Preparation

  • Ammonium salts react with alkali to release NH3 gas.

  • Reactions:

    • 2NH4Cl + Ca(OH)2 → 2NH3 + CaCl2 + 2H2O

    • (NH4)2SO4 + 2NaOH → 2NH3 + Na2SO4 + 2H2O

    • Mg3N2 + 6HCl → 3MgCl2 + 2NH3

  • Urea hydrolyzes in water to form ammonium carbonate, which decomposes to NH3, CO2, and H2O.

Diagram 5 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Manufacture (Haber's Process)

  • Large scale synthesis of NH3 from N2 and H2.

  • Reaction: N2 + 3H2 ⇌ 2NH3 + heat (ΔH° = -46.1 kJ/mol)

  • Conditions: 773 K, 200 atm, iron oxide catalyst with K2O and Al2O3 promoters.

Diagram 6 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for laboratory preparation of NH3 from ammonium chloride and calcium hydroxide.

    • 2NH4Cl + Ca(OH)2 → 2NH3 + CaCl2 + 2H2O

  • Ex 2: State the conditions for Haber’s process.

    • Temperature: 773 K, Pressure: 200 atm, Catalyst: Fe2O3 with K2O and Al2O3.

Practice Set

  • Q1: Which reagent is used with ammonium salts to prepare ammonia in the lab?

    • A. HCl

    • B. NaOH

    • C. H2SO4

    • D. CaCl2

  • Q2: In Haber’s process, the catalyst used is:

    • A. Platinum

    • B. Iron oxide

    • C. Copper

    • D. Zinc oxide

  • Q3: The reaction N2 + 3H2 ⇌ 2NH3 is:

    • A. Endothermic

    • B. Exothermic

    • C. Neither

    • D. Irreversible

Answer Key

  • Q1: B - Alkali (NaOH or Ca(OH)2) reacts with ammonium salts to release NH3.

  • Q2: B - Iron oxide catalyst is used in Haber’s process.

  • Q3: B - The reaction is exothermic (releases heat).

Memory Aids

  • Ammonia lab prep: Ammonium salt + Alkali → NH3

  • Haber’s process: N2 + 3H2 ⇌ 2NH3, Fe catalyst, 773 K, 200 atm

  • Exothermic reaction: Heat released, equilibrium shifts left if temperature increases

Ammonia Structure

Molecular Geometry

  • NH3 is trigonal pyramidal with bond angle ~107.8°.

  • Nitrogen uses sp3 hybridization: 3 orbitals overlap with H 1s orbitals; 1 orbital holds lone pair.

  • Hydrogen bonding occurs in liquid and solid states.

Diagram 7 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Describe the shape and bond angle of NH3.

    • Trigonal pyramidal shape; bond angle 107.8° due to lone pair repulsion.

Practice Set

  • Q1: The hybridization of nitrogen in NH3 is:

    • A. sp

    • B. sp2

    • C. sp3

    • D. dsp2

  • Q2: The bond angle in ammonia is approximately:

    • A. 90°

    • B. 104.5°

    • C. 107.8°

    • D. 120°

  • Q3: The shape of NH3 molecule is due to:

    • A. Lone pair on nitrogen

    • B. Double bonds

    • C. Hydrogen bonding

    • D. Ionic bonding

Answer Key

  • Q1: C - Nitrogen is sp3 hybridized in NH3.

  • Q2: C - Bond angle is 107.8° due to lone pair repulsion.

  • Q3: A - Lone pair on nitrogen causes trigonal pyramidal shape.

Memory Aids

  • NH3 shape: Trigonal pyramidal due to 1 lone pair on N

  • Bond angle less than tetrahedral (109.5°) due to lone pair repulsion

  • Hydrogen bonding in liquid/solid states increases boiling point

Ammonia Basic Character

Lewis Base Behavior

  • NH3 donates lone pair of electrons, acting as a Lewis base.

  • In water, NH3 accepts H+ forming NH4+ and OH− ions.

  • Reaction: NH3 + H2O ⇌ NH4+ + OH−

Diagram 8 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Reaction with Heavy Metal Ions

  • Forms insoluble metal hydroxide precipitates with Fe3+, Zn2+, etc.

  • Examples:

    • FeCl3 + 3NH4OH → Fe(OH)3↓ + 3NH4Cl (brown ppt.)

    • ZnCl2 + 2NH4OH → Zn(OH)2↓ + 2NH4Cl (white ppt.)

Formation of Complex Compounds

  • NH3 forms stable soluble complexes with Ag+, Cu2+, Hg2+, etc.

  • Examples:

    • AgCl + 2NH4OH → [Ag(NH3)2]Cl + 2H2O (soluble)

    • Cu(OH)2 + (NH4)2SO4 + NH4OH → [Cu(NH3)4]SO4 + 4H2O (deep blue solution)

Solved Examples

  • Ex 1: Write the reaction of NH3 with water.

    • NH3 + H2O ⇌ NH4+ + OH−

  • Ex 2: Reaction of FeCl3 with NH4OH.

    • FeCl3 + 3NH4OH → Fe(OH)3↓ + 3NH4Cl (brown ppt.)

Practice Set

  • Q1: NH3 acts as a:

    • A. Lewis acid

    • B. Lewis base

    • C. Both

    • D. Neither

  • Q2: The precipitate formed when ZnCl2 reacts with NH4OH is:

    • A. ZnCl2

    • B. Zn(OH)2

    • C. ZnO

    • D. Zn(NH3)42+

  • Q3: The complex ion formed by NH3 with Ag+ is:

    • A. [Ag(NH3)]+

    • B. [Ag(NH3)2]+

    • C. [Ag(NH3)3]+

    • D. [Ag(NH3)4]+

Answer Key

  • Q1: B - NH3 donates lone pair, acts as Lewis base.

  • Q2: B - Zn(OH)2 is the white precipitate formed.

  • Q3: B - Diamminesilver(I) complex is [Ag(NH3)2]+.

Memory Aids

  • NH3 + H2O ⇌ NH4+ + OH−: Basic solution formation

  • NH3 forms insoluble metal hydroxides with Fe3+, Zn2+

  • Stable complexes: Ag+ forms [Ag(NH3)2]+, Cu2+ forms [Cu(NH3)4]2+

Nitrogen Hydrides

Types and Properties

  • Three main hydrides: NH3 (ammonia), N2H4 (hydrazine), N3H (hydrazoic acid).

  • NH3 and N2H4 are basic; N3H is distinctly acidic.

Solved Examples

  • Ex 1: Identify the acidic nitrogen hydride.

    • Hydrazoic acid (N3H) is acidic.

Practice Set

  • Q1: Which nitrogen hydride is acidic?

    • A. NH3

    • B. N2H4

    • C. N3H

    • D. None

  • Q2: Hydrazine (N2H4) is:

    • A. Acidic

    • B. Basic

    • C. Neutral

    • D. Amphoteric

  • Q3: The formula of hydrazoic acid is:

    • A. NH3

    • B. N2H4

    • C. N3H

    • D. NH2NH2

Answer Key

  • Q1: C - N3H (hydrazoic acid) is acidic.

  • Q2: B - Hydrazine is basic in nature.

  • Q3: C - Hydrazoic acid formula is N3H.

Memory Aids

  • NH3 and N2H4: Basic hydrides

  • N3H: Acidic hydride

  • Hydrazine = N2H4, Hydrazoic acid = N3H

Oxides of Nitrogen

Preparation and Properties

  • Nitrogen oxides are compounds of nitrogen and oxygen with varying oxidation states.

  • Common oxides include N2O, NO, N2O3, NO2, and N2O5.

  • Preparation methods vary: thermal decomposition, oxidation, and reduction reactions.

  • Physical states differ: gases (N2O, NO, NO2), liquids, or solids.

  • Acidic or neutral nature depends on oxide; e.g., N2O is neutral, NO2 is acidic.

Diagram 9 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the preparation reaction of nitric oxide (NO).

    • Reaction: N2 + O2 → 2NO (at high temperature)

  • Ex 2: Identify the oxidation state of nitrogen in N2O5.

    • Calculation: Let x = O.S. of N; 2x + 5(-2) = 0 ⇒ 2x -10 = 0 ⇒ x = +5

Practice Set

  • Q1: Which oxide of nitrogen is a colorless, neutral gas?

    • A. NO2

    • B. N2O

    • C. N2O5

    • D. NO

  • Q2: What is the oxidation state of nitrogen in NO2?

    • A. +2

    • B. +3

    • C. +4

    • D. +5

  • Q3: Which reaction correctly represents the preparation of nitrogen dioxide (NO2)?

    • A. 2NO + O2 → 2NO2

    • B. N2 + O2 → 2NO2

    • C. N2O5 → NO2 + O2

    • D. NO + N2O5 → NO2

Answer Key

  • Q1: B. N2O is colorless and neutral.

  • Q2: C. Nitrogen in NO2 has +4 oxidation state.

  • Q3: A. 2NO + O2 → 2NO2 is the correct preparation reaction.

Memory Aids

  • Remember: N2O (laughing gas) is neutral and colorless.

  • NO is formed by direct combination of N2 and O2 at high temperature.

  • NO2 is brown and acidic; formed by oxidation of NO.

Nitric Acid Preparation

Laboratory Preparation

  • React sodium nitrate (NaNO3) with concentrated sulfuric acid (H2SO4):

  • NaNO3 + 5H2SO4 → NaHSO4 + HNO3

Ostwald’s Process

  • Ammonia (NH3) oxidized to nitric acid using platinum/rhodium catalyst:

  • 1. 4NH3 + 5O2 → 4NO + 6H2O (catalyst, high T and P)

  • 2. 2NO + O2 → 2NO2

  • 3. 3NO2 + H2O → 2HNO3 + NO

  • NO is recycled; HNO3 concentrated by distillation (~68%) and dehydration with concentrated H2SO4 to 98%

Diagram 10 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for ammonia oxidation in Ostwald’s process.

  • Answer: 4NH3 + 5O2 → 4NO + 6H2O (with catalyst)

Practice Set

  • Q1: Which catalyst is used in Ostwald’s process?

  • A. Iron B. Platinum/rhodium C. Copper D. Nickel

  • Q2: What is the product when NaNO3 reacts with H2SO4?

  • A. NaHSO4 + HNO3 B. Na2SO4 + HNO3 C. NaNO2 + H2SO4 D. NaNO3 + H2O

  • Q3: What is the maximum concentration of HNO3 obtained by distillation before dehydration?

  • A. 50% B. 68% C. 85% D. 98%

Answer Key

  • Q1: B - Platinum/rhodium catalyst is used for ammonia oxidation.

  • Q2: A - Reaction produces NaHSO4 and HNO3.

  • Q3: B - Distillation concentrates HNO3 up to ~68% before dehydration.

Memory Aids

  • Ostwald’s process uses Pt/Rh catalyst for NH3 oxidation.

  • NaNO3 + H2SO4 → NaHSO4 + HNO3 (lab prep).

  • Distillation max ~68%, dehydration to 98% HNO3.

Nitric Acid Properties

Physical Properties

  • Pure HNO3 is colourless; impure appears yellow due to nitrogen oxides.

  • Gaseous HNO3 is planar molecule.

  • Molecular structure: bond lengths and angles define shape (H–O: 96 pm, angle 102°; N–O: 121 pm, angle 130°).

Diagram 11 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Chemical Properties

  • Strong oxidising agent; converts non-metals to highest oxyacids with evolution of NO and NO2 gases.

  • Examples:

  • I2 + 10HNO3 → 2HIO3 + 10NO2 + 4H2O

  • C + 4HNO3 → CO2 + 2H2O + NO2

  • S8 + 48HNO3 → 8H2SO4 + 48NO2 + 16H2O

  • P4 + 20HNO3 → 4H3PO4 + 20NO2 + 4H2O

Reactions with Metals

  • Acts as acid and oxidising agent; products depend on metal and acid concentration.

  • Very dilute HNO3: Mg, Mn produce H2 + metal nitrate; Fe, Zn, Sn produce NH4NO3 + metal nitrate.

  • Dilute HNO3: Pb, Cu, Ag, Hg produce NO + metal nitrate; Fe, Zn produce N2O + metal nitrate; Sn produces NH4NO3 + Sn nitrate.

  • Concentrated HNO3: Zn, Fe, Pb, Cu, Ag produce NO2 + metal nitrate; Sn produces NO2 + H2SnO3.

Diagram 12 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Brown Ring Test

  • Detects nitrate ion (NO3−):

  • NO3− + 3Fe2+ + 4H+ → NO + 3Fe3+ + 2H2O

  • [Fe(H2O)6]2+ + NO → [Fe(H2O)5(NO)]2+ + H2O (brown complex)

Solved Examples

  • Ex 1: Write the reaction of iodine with hot concentrated nitric acid.

  • Answer: I2 + 10HNO3 → 2HIO3 + 10NO2 + 4H2O

  • Ex 2: What gas is evolved when copper reacts with dilute nitric acid?

  • Answer: Nitric oxide (NO) gas is evolved.

Practice Set

  • Q1: What is the colour of pure nitric acid?

  • A. Yellow B. Colourless C. Brown D. Blue

  • Q2: Which gas is evolved when zinc reacts with concentrated nitric acid?

  • A. H2 B. NO C. NO2 D. N2O

  • Q3: In the brown ring test, the brown complex formed is due to coordination of NO with which ion?

  • A. Fe2+ B. Fe3+ C. Cu2+ D. Zn2+

Answer Key

  • Q1: B - Pure HNO3 is colourless; yellow colour indicates impurities.

  • Q2: C - Concentrated HNO3 with zinc produces NO2 gas.

  • Q3: A - Brown ring complex is [Fe(H2O)5(NO)]2+ with Fe2+.

Memory Aids

  • Pure HNO3 is colourless; yellow means nitrogen oxides present.

  • Brown ring test detects NO3− via Fe2+ complex.

  • Metal + HNO3 reaction products depend on acid concentration and metal type.

Phosphorus Allotropic Forms

White Phosphorus

  • Appearance: White translucent waxy solid, poisonous.

  • Solubility: Insoluble in water, soluble in CS2.

  • Structure: Consists of discrete tetrahedral P4 molecules with 60° bond angles causing angular strain.

  • Reactivity: Less stable, highly reactive due to strain.

  • Chemiluminescence: Glows in dark.

  • Reactions:

    • Dissolves in boiling NaOH (inert atmosphere) to give PH3:
      P4 + 3NaOH + 3H2O → PH3 + 3NaH2PO2 (Sodium hypophosphite)

    • Burns in air producing dense white fumes of P4O10:
      P4 + 5O2 → P4O10

Diagram 13 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Red Phosphorus

  • Preparation: Heating white phosphorus at 573 K in inert atmosphere for several days.

  • Appearance: Iron grey lustre, odourless, non-poisonous.

  • Solubility: Insoluble in water and CS2.

  • Structure: Polymeric chains of P4 tetrahedra.

  • Reactivity: Less reactive than white phosphorus, does not glow in dark.

  • Under high pressure, red phosphorus converts to black phosphorus phases.

Diagram 14 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Black Phosphorus

  • Forms:

    • α-Black Phosphorus: Formed by heating red phosphorus at 803 K in sealed tube; has opaque monoclinic or rhombohedral crystals; can sublime in air; does not oxidize in air.

    • β-Black Phosphorus: Prepared by heating white phosphorus at 473 K under high pressure; layered structure; does not burn in air up to 673 K.

Solved Examples

  • Ex 1: Write the reaction of white phosphorus with boiling NaOH in inert atmosphere.
    Solution: P4 + 3NaOH + 3H2O → PH3 + 3NaH2PO2

  • Ex 2: Describe the conversion of white phosphorus to red phosphorus.
    Solution: Heat white phosphorus at 573 K in inert atmosphere for several days to obtain red phosphorus.

Practice Set

  • Q1: Which allotrope of phosphorus glows in the dark?
    A. Red phosphorus
    B. White phosphorus
    C. Black phosphorus
    D. None

  • Q2: What is the product formed when white phosphorus burns in air?
    A. P4O6
    B. P4O10
    C. PH3
    D. P2O5

  • Q3: Which allotrope of phosphorus is obtained by heating white phosphorus at 573 K in inert atmosphere?
    A. Black phosphorus
    B. Red phosphorus
    C. White phosphorus
    D. Violet phosphorus

Answer Key

  • Q1: B. White phosphorus glows in the dark due to chemiluminescence.

  • Q2: B. White phosphorus burns in air to form P4O10.

  • Q3: B. Red phosphorus is formed by heating white phosphorus at 573 K in inert atmosphere.

Memory Aids

  • White phosphorus = P4 tetrahedral, reactive, glows.

  • Red phosphorus = polymeric chains, less reactive, no glow.

  • Black phosphorus = layered structure, stable, two forms α and β.

  • White P + NaOH + H2O → PH3 + Sodium hypophosphite.

  • White P + O2 → P4O10 (dense white fumes).

Phosphine

Preparation

  • From calcium phosphide: Ca3P2 + 6H2O → 3Ca(OH)2 + 2PH3

  • From calcium phosphide and hydrochloric acid: Ca3P2 + 6HCl → 3CaCl2 + 2PH3

  • From phosphonium iodide and KOH: PH4I + KOH → KI + H2O + PH3

  • From white phosphorus, sodium hydroxide and water: P4 + 3NaOH + 3H2O → 3NaH2PO2 + PH3

Properties

  • Colourless gas with a characteristic rotten fish smell

  • Highly poisonous

  • Decomposes on heating: 4PH3 Δ→ P4 + 6H2

  • Reacts with copper sulfate: 2PH3 + 3CuSO4 → Cu3P2 + 3H2SO4

  • Reacts with hydrobromic acid to form phosphonium bromide: PH3 + HBr → PH4Br

  • Reacts only with anhydrous HX (HCl, HBr, HI), not with aqueous HX because phosphonium halides decompose in water to regenerate PH3

Diagram 15 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for preparation of PH3 from calcium phosphide and water.
    Answer: Ca3P2 + 6H2O → 3Ca(OH)2 + 2PH3

  • Ex 2: What happens when PH3 is heated?
    Answer: 4PH3 Δ→ P4 + 6H2

Practice Set

  • Q1: Which of the following is a method to prepare phosphine?
    A. P4 + NaOH + H2O
    B. PH3 + H2O
    C. PH4Br + KOH
    D. PCl3 + H2O

  • Q2: Phosphine reacts with which acid only in anhydrous form?
    A. HCl
    B. HBr
    C. HI
    D. All of the above

  • Q3: On heating, phosphine decomposes to give:
    A. White phosphorus and hydrogen
    B. Red phosphorus and hydrogen
    C. Phosphorus pentoxide and hydrogen
    D. Phosphoric acid and hydrogen

Answer Key

  • Q1: A. P4 + NaOH + H2O; This reaction produces PH3 from white phosphorus.

  • Q2: D. All of the above; PH3 reacts with anhydrous HCl, HBr, and HI only.

  • Q3: B. Red phosphorus and hydrogen; PH3 decomposes on heating to red phosphorus (P4) and H2.

Memory Aids

  • PH3 smells like rotten fish and is highly poisonous.

  • Phosphine reacts only with anhydrous HX, aqueous HX regenerates PH3.

  • Heating PH3 → red phosphorus + hydrogen gas.

Phosphorus Halides

Chemical Structures

  • PCl3: Phosphorus bonded to three chlorine atoms; trigonal pyramidal shape.

  • PCl5: Phosphorus bonded to five chlorine atoms; trigonal bipyramidal shape.

Preparation

  • PCl3: React white phosphorus (P4) with limited chlorine (Cl2).

  • PCl5: React PCl3 with excess chlorine or directly P4 with excess Cl2.

Chemical Properties

  • Hydrolysis: PCl3 + 3H2O → H3PO3 + 3HCl

  • PCl5 + H2O → POCl3 + 2HCl (partial hydrolysis)

  • Further hydrolysis of POCl3 gives H3PO4.

  • React with SO2 and Zn to form other phosphorus compounds.

  • React with organic compounds to introduce chlorine atoms.

Uses

  • PCl5: Chlorinating agent, dehydrating agent in organic synthesis.

  • PCl3: Precursor for organophosphorus compounds, insecticides, and plasticizers.

Diagram 16 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for preparation of PCl3 from white phosphorus.
    Step 1: P4 + 6Cl2 → 4PCl3

  • Ex 2: Show hydrolysis of PCl5.
    Step 1: PCl5 + H2O → POCl3 + 2HCl
    Step 2: POCl3 + 3H2O → H3PO4 + 3HCl

Practice Set

  • Q1: What is the shape of PCl5?
    A. Tetrahedral
    B. Trigonal bipyramidal
    C. Octahedral
    D. Square planar

  • Q2: Which reagent is used to prepare PCl3 from white phosphorus?
    A. Excess Cl2
    B. Limited Cl2
    C. H2O
    D. SO2

  • Q3: What is the product when PCl3 reacts with water?
    A. H3PO4
    B. H3PO3
    C. POCl3
    D. PCl5

Answer Key

  • Q1: B. Trigonal bipyramidal — PCl5 has five bonded atoms arranged in trigonal bipyramidal geometry.

  • Q2: B. Limited Cl2 — Limited chlorine reacts with P4 to form PCl3.

  • Q3: B. H3PO3 — PCl3 hydrolyzes to phosphorous acid (H3PO3).

Memory Aids

  • PCl3 = 3 chlorines, pyramidal shape, hydrolyzes to H3PO3.

  • PCl5 = 5 chlorines, trigonal bipyramidal, partial hydrolysis forms POCl3.

  • Preparation: Limited Cl2 → PCl3, Excess Cl2 → PCl5.

  • PCl5 used as chlorinating and dehydrating agent; PCl3 used in organic synthesis.

Oxoacids of Phosphorus

Overview

  • Oxoacids contain phosphorus bonded to oxygen and hydrogen atoms.

  • Phosphorus exhibits different oxidation states: +3 and +5 in oxoacids.

  • Common oxoacids include phosphorous acid (H3PO3) and phosphoric acid (H3PO4).

  • Structures vary: phosphorous acid has one P=O bond and two P–OH groups; phosphoric acid has one P=O and three P–OH groups.

  • Preparation methods involve hydrolysis of phosphorus halides or oxidation of phosphorus compounds.

Diagram 17 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the formula and oxidation state of phosphorus in phosphorous acid.
    - Formula: H3PO3
    - Oxidation state of P: +3

  • Ex 2: Describe the preparation of phosphoric acid.
    - React P4O10 with water:
    P4O10 + 6H2O → 4H3PO4

Practice Set

  • Q1: What is the oxidation state of phosphorus in H3PO4?
    A. +3
    B. +5
    C. +1
    D. 0

  • Q2: Which acid has the formula H3PO3?
    A. Phosphoric acid
    B. Phosphorous acid
    C. Hypophosphorous acid
    D. Perphosphoric acid

  • Q3: Which method is used to prepare phosphorous acid?
    A. Hydrolysis of PCl3
    B. Oxidation of PCl5
    C. Reaction of P4O10 with water
    D. Electrolysis of phosphates

Answer Key

  • Q1: B. +5
    Phosphorus in H3PO4 is in +5 oxidation state due to four oxygen atoms bonded.

  • Q2: B. Phosphorous acid
    H3PO3 is phosphorous acid with P in +3 state.

  • Q3: A. Hydrolysis of PCl3
    Phosphorous acid is prepared by hydrolyzing phosphorus trichloride (PCl3).

Memory Aids

  • Phosphorous acid (H3PO3) has P in +3 state; remember \"ous\" acids have lower oxidation states.

  • Phosphoric acid (H3PO4) has P in +5 state; \"ic\" acids have higher oxidation states.

  • Preparation: PCl3 + H2O → H3PO3; P4O10 + H2O → H3PO4.

Group 16 Elements

General Characteristics

  • Elements: Oxygen (O), Sulphur (S), Selenium (Se), Tellurium (Te), Polonium (Po), Livermorium (Lv).

  • Also called chalcogens.

  • Livermorium is synthetic, radioactive, with very short half-life; properties not well studied.

  • General electronic configuration: ns2np4.

  • Diagram 18 – NEET Chemistry The p-Block Elements (Group 15 to 18)
  • Atomic number and electronic complexity increase down the group.

Physical Properties

  • Atomic and ionic radii increase down the group.

  • Ionization enthalpy decreases down the group; lower than group 15 due to half-filled p-subshell stability in group 15.

  • Electronegativity decreases down the group.

  • Electron gain enthalpy: O less negative than S due to small size; from S to Po, becomes less negative.

  • Melting and boiling points increase down to Te; Po has lower m.pt. and b.pt. than Te.

  • Elemental states: O2 is diatomic with pπ–pπ multiple bonding; S, Se, Te form octatomic molecules (S8, Se8, Te8); all show allotropy.

Chemical Properties

  • Oxidation states:

    • Oxygen: -2, -1, -1/2, 0, +1, +2.

    • Others: -2, +2, +4, +6.

    • -2 state stability decreases down the group due to decreasing electronegativity.

    • +4 state stability increases; +6 state stability decreases due to inert pair effect.

  • Hydrides:

    • General formula: H2E.

    • Physical state: H2O is liquid; others are gases.

    • Boiling points: H2S < H2Se < H2Te < H2O.

    • Bond angles: H2O > H2S > H2Se > H2Te.

    • Reducing power: H2Te > H2Se > H2S > H2O.

    • Acidic character: H2O < H2S < H2Se < H2Te.

    • Thermal stability: H2O > H2S > H2Se > H2Te.

  • Oxides:

    • Form EO2 and EO3 types.

    • Both types are acidic.

    • Reducing property decreases from SO2 to TeO2.

  • Halides:

    • Types: EX6, EX4, EX2.

    • Stability order: F- > Cl- > Br- > I-.

    • Only hexafluorides are stable with octahedral geometry.

    • Tetrafluorides: SF4 (gas), SeF4 (liquid), TeF4 (solid); trigonal bipyramidal structure.

    • Dihalides have tetrahedral structure.

    • Monohalides exist as dimers.

Solved Examples

  • Ex 1: Write the general electronic configuration of group 16 elements.
    Answer: ns2np4.

  • Ex 2: Arrange the hydrides H2S, H2O, H2Se, H2Te in order of increasing boiling point.
    Answer: H2S < H2Se < H2Te < H2O.

  • Ex 3: Identify the oxidation states exhibited by oxygen.
    Answer: -2, -1, -1/2, 0, +1, +2.

Practice Set

  • Q1: Which element is not a member of group 16?
    A. Oxygen
    B. Sulphur
    C. Nitrogen
    D. Selenium

  • Q2: Which hydride has the highest thermal stability?
    A. H2S
    B. H2Se
    C. H2Te
    D. H2O

  • Q3: Which of the following halides has octahedral geometry?
    A. SF4
    B. SeF4
    C. TeF4
    D. SF6

Answer Key

  • Q1: C. Nitrogen is in group 15, not group 16.

  • Q2: D. H2O has the highest thermal stability among group 16 hydrides.

  • Q3: D. SF6 is a hexafluoride with octahedral geometry; others have different structures.

Memory Aids

  • Group 16 elements = Chalcogens (\"ore-formers\").

  • Hydrides formula: H2E; boiling point order: H2S < H2Se < H2Te < H2O.

  • Oxidation states: O shows multiple states; others mainly -2, +2, +4, +6.

  • Hexafluorides are stable and octahedral; SF6 is a key example.

Dioxygen Preparation

Methods of Preparation

  • Heating oxo salts (chlorates, nitrates, permanganates) in lab produces O2.

  • Example: Decomposition of potassium chlorate (KClO3) with MnO2 catalyst:

    • 2KClO3 (heat, MnO2) → 2KCl + 3O2

    • MnO2 lowers decomposition temperature from 650 K to 523 K.

    • MnO2 must be carbon-free to avoid explosive mixtures.

  • Thermal decomposition of heavy metal oxides:

    • 2HgO (heat) → 2Hg + O2

    • 2Ag2O (heat) → 4Ag + O2

    • 2PbO2 (heat) → 2PbO + O2

  • Decomposition of hydrogen peroxide (H2O2) with MnO2 catalyst:

    • 2H2O2 (MnO2) → 2H2O + O2

  • Large scale: Electrolysis of water:

    • At cathode: 2H+ + 2e− → H2 (byproduct)

    • At anode: 2OH− → H2O + 1/2 O2 + 2e−

Solved Examples

Ex 1: Write the equation for oxygen preparation from potassium chlorate using MnO2.

Solution:

  • 2KClO3 (heat, MnO2) → 2KCl + 3O2

Ex 2: Write the reaction for oxygen release from hydrogen peroxide with MnO2.

Solution:

  • 2H2O2 (MnO2) → 2H2O + O2

Practice Set

Q1: Which catalyst is used in the decomposition of KClO3 to produce oxygen?

  • A. MnO2

  • B. Fe2O3

  • C. CuO

  • D. ZnO

Q2: What is the product formed when HgO is heated?

  • A. Hg + O2

  • B. HgO2

  • C. Hg2O

  • D. Hg + H2O

Q3: In the electrolysis of water, what gas is produced at the cathode?

  • A. O2

  • B. H2

  • C. CO2

  • D. Cl2

Answer Key

Q1: A. MnO2 - It acts as a catalyst lowering decomposition temperature.

Q2: A. Hg + O2 - Heating HgO decomposes it into mercury and oxygen.

Q3: B. H2 - Hydrogen gas is produced at the cathode during water electrolysis.

Memory Aids

  • MnO2 catalyzes KClO3 decomposition, lowers temperature.

  • Heavy metal oxides decompose on heating to metal + O2.

  • Electrolysis: Cathode → H2, Anode → O2.

Dioxygen Physical Properties

Key Physical Properties

  • Colourless, odourless, tasteless gas.

  • Paramagnetic due to 2 unpaired electrons in antibonding molecular orbitals.

Solved Examples

Ex 1: Why is O2 paramagnetic?

Solution:

  • O2 has 2 unpaired electrons in antibonding π* orbitals causing paramagnetism.

Practice Set

Q1: What is the magnetic property of dioxygen?

  • A. Diamagnetic

  • B. Paramagnetic

  • C. Ferromagnetic

  • D. Non-magnetic

Q2: Which of the following describes dioxygen?

  • A. Colourless, odourless, tasteless gas

  • B. Coloured, odourless gas

  • C. Colourless, odorous liquid

  • D. Coloured, odorous solid

Q3: The paramagnetism of O2 is due to:

  • A. Paired electrons in bonding orbitals

  • B. Unpaired electrons in antibonding orbitals

  • C. Absence of electrons

  • D. Presence of lone pairs

Answer Key

Q1: B. Paramagnetic - Due to unpaired electrons.

Q2: A. Colourless, odourless, tasteless gas - Standard physical description.

Q3: B. Unpaired electrons in antibonding orbitals - Cause paramagnetism.

Memory Aids

  • O2 is paramagnetic: remember \"two unpaired electrons\".

  • Physical state: colourless, odourless, tasteless gas.

Dioxygen Chemical Properties

Reactivity and Reactions

  • Reacts with most metals (except noble metals like Au, Pt) to form oxides.

  • Reacts with non-metals and some noble gases.

  • Examples of reactions:

    • Ca + O2 → CaO (basic oxide)

    • 4Al + 3O2 → 2Al2O3 (amphoteric oxide)

    • 4P + 5O2 → 2P2O5 (acidic oxide)

    • C + O2 → CO2 (acidic oxide)

    • 2ZnS + 3O2 → 2ZnO + 2SO2 (roasting)

    • CH4 + 2O2 → CO2 + 2H2O (combustion)

    • 2SO2 + O2 (V2O5 catalyst) → 2SO3 (catalytic oxidation)

    • 4HCl + O2 (CuCl2 catalyst) → 2Cl2 + 2H2O (catalytic oxidation)

Solved Examples

Ex 1: Write the reaction of aluminum with oxygen.

Solution:

  • 4Al + 3O2 → 2Al2O3

Ex 2: Write the reaction for catalytic oxidation of SO2 to SO3.

Solution:

  • 2SO2 + O2 (V2O5) → 2SO3

Practice Set

Q1: Which oxide formed by oxygen is amphoteric?

  • A. CaO

  • B. Al2O3

  • C. P2O5

  • D. CO2

Q2: What is the product of roasting zinc sulfide?

  • A. Zn + SO2

  • B. ZnO + SO2

  • C. ZnS + O2

  • D. ZnSO4

Q3: Which catalyst is used in the oxidation of SO2 to SO3?

  • A. CuCl2

  • B. V2O5

  • C. MnO2

  • D. Fe2O3

Answer Key

Q1: B. Al2O3 - Amphoteric oxide reacts with acids and bases.

Q2: B. ZnO + SO2 - Roasting converts ZnS to ZnO and SO2.

Q3: B. V2O5 - Catalyst for SO2 oxidation to SO3.

Memory Aids

  • Basic oxide: CaO; Amphoteric: Al2O3; Acidic: P2O5, CO2.

  • Roasting: ZnS + O2 → ZnO + SO2.

  • V2O5 catalyzes SO2 oxidation; CuCl2 catalyzes HCl oxidation.

Diagram 19 – NEET Chemistry The p-Block Elements (Group 15 to 18)Diagram 20 – NEET Chemistry The p-Block Elements (Group 15 to 18)Diagram 21 – NEET Chemistry The p-Block Elements (Group 15 to 18)Diagram 22 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Simple Oxides

Classification of Oxides (Based on Chemical Behaviour)

  • Oxides are compounds of oxygen with another element.

  • Simple oxides contain one metal + oxygen (e.g., MgO).

  • Mixed oxides contain two or more metals + oxygen (e.g., Pb3O4).

  • Acidic oxides react with water to form acids (e.g., SO2).

  • Basic oxides react with acids to form salts (e.g., Na2O).

  • Amphoteric oxides react with both acids and bases (e.g., Al2O3).

  • Neutral oxides do not react with acids or bases (e.g., CO).

Diagram 23 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Identify the type of oxide: MgO.
    Solution: MgO contains one metal and oxygen; it is a simple basic oxide.

  • Ex 2: Write the product when P4O10 reacts with water.
    Solution: P4O10 + 6H2O → 4H3PO4 (phosphoric acid).

Practice Set

  • Q1: Which oxide is amphoteric?
    A. Na2O
    B. Al2O3
    C. SO2
    D. CO

  • Q2: What is the product of N2O5 reacting with water?
    A. HNO2
    B. HNO3
    C. H2SO4
    D. H3PO4

  • Q3: Which oxide is neutral?
    A. CO
    B. SO3
    C. Na2O
    D. Al2O3

Answer Key

  • Q1: B. Al2O3 - It reacts with both acids and bases.

  • Q2: B. HNO3 - N2O5 + H2O → 2HNO3.

  • Q3: A. CO - Neutral oxide; does not react with acids or bases.

Memory Aids

  • Acidic oxides + water → acids (e.g., SO2, P4O10).

  • Basic oxides + water → bases (e.g., Na2O, CaO).

  • Amphoteric oxides react with both acids and bases (e.g., Al2O3).

  • Neutral oxides do not react with acids or bases (e.g., CO).

Acidic Oxides

Properties and Reactions

  • Dissolve in water to form acids.

  • Examples and reactions:
    P4O10 + 6H2O → 4H3PO4
    N2O5 + H2O → 2HNO3
    2NO2 + H2O → HNO2 + HNO3
    P4O6 + 6H2O → 4H3PO3

  • Acidic strength order for dioxides: SO2 > SeO2 > TeO2 > PoO2

  • Acidic strength order for trioxides: SO3 > SeO3 > TeO3

Solved Examples

  • Ex 1: Write the acid formed when P4O10 reacts with water.
    Solution: Phosphoric acid (H3PO4).

  • Ex 2: Predict the product of N2O5 + H2O.
    Solution: Nitric acid (HNO3).

Practice Set

  • Q1: Which oxide forms HNO3 on reaction with water?
    A. N2O5
    B. SO2
    C. CO2
    D. NO

  • Q2: Arrange the acidic strength of dioxides in decreasing order.
    A. TeO2 > SO2 > SeO2
    B. SO2 > SeO2 > TeO2
    C. SeO2 > SO2 > TeO2
    D. PoO2 > TeO2 > SO2

  • Q3: Which acid is formed from P4O6 + H2O?
    A. H3PO4
    B. H3PO3
    C. HNO3
    D. H2SO4

Answer Key

  • Q1: A. N2O5 - Reacts with water to form nitric acid.

  • Q2: B. SO2 > SeO2 > TeO2 - Correct acidic strength order.

  • Q3: B. H3PO3 - Phosphorous acid formed from P4O6.

Memory Aids

  • Acidic oxides + H2O → corresponding acids.

  • Stronger acidity: SO > Se > Te > Po in oxides.

  • Phosphorus oxides: P4O10 → H3PO4, P4O6 → H3PO3.

Basic Oxides

Properties and Reactions

  • Dissolve in water to form bases (alkalis).

  • Examples and reactions:
    Na2O + H2O → 2NaOH
    K2O + H2O → 2KOH
    CaO + H2O → Ca(OH)2

  • React with acids to form salts and water.

Solved Examples

  • Ex 1: Write the base formed when Na2O reacts with water.
    Solution: Sodium hydroxide (NaOH).

  • Ex 2: Write the product of CaO + H2O.
    Solution: Calcium hydroxide Ca(OH)2.

Practice Set

  • Q1: Which oxide forms KOH on reaction with water?
    A. K2O
    B. CO2
    C. SO3
    D. Al2O3

  • Q2: What is the product of CaO + H2O?
    A. CaO
    B. Ca(OH)2
    C. CaH2
    D. CaOH

  • Q3: Which of the following is a basic oxide?
    A. SO2
    B. Na2O
    C. CO
    D. Al2O3

Answer Key

  • Q1: A. K2O - Reacts with water to form KOH.

  • Q2: B. Ca(OH)2 - Calcium hydroxide formed.

  • Q3: B. Na2O - Basic oxide.

Memory Aids

  • Basic oxides + H2O → alkalis (NaOH, KOH, Ca(OH)2).

  • Alkali metals and alkaline earth metals form basic oxides.

Amphoteric Oxides

Properties and Reactions

  • React with both acids and bases.

  • Example: Aluminum oxide (Al2O3).

  • Reactions:
    Al2O3 + 6HCl → 2AlCl3 + 3H2O
    Al2O3 + 6NaOH + 3H2O → 2Na3[Al(OH)6]
    Al2O3 + 2NaOH → 2NaAlO2 + H2O (Sodium aluminate)

Solved Examples

  • Ex 1: Write the product when Al2O3 reacts with HCl.
    Solution: Aluminum chloride (AlCl3) and water.

  • Ex 2: Write the product when Al2O3 reacts with NaOH.
    Solution: Sodium aluminate (NaAlO2) and water.

Practice Set

  • Q1: Which oxide reacts with both acids and bases?
    A. Na2O
    B. SO2
    C. Al2O3
    D. CO

  • Q2: What is formed when Al2O3 reacts with NaOH?
    A. NaCl
    B. NaAlO2
    C. AlCl3
    D. NaOH

  • Q3: Write the balanced reaction of Al2O3 with HCl.
    A. Al2O3 + 6HCl → 2AlCl3 + 3H2O
    B. Al2O3 + 2HCl → 2AlCl + H2O
    C. Al2O3 + HCl → AlCl + H2O
    D. Al2O3 + 3HCl → AlCl3 + H2O

Answer Key

  • Q1: C. Al2O3 - Amphoteric oxide.

  • Q2: B. NaAlO2 - Sodium aluminate formed.

  • Q3: A. Al2O3 + 6HCl → 2AlCl3 + 3H2O - Correct balanced reaction.

Memory Aids

  • Amphoteric oxides react with acids and bases.

  • Al2O3 is a classic amphoteric oxide.

  • Reactions produce salts like AlCl3 and sodium aluminate.

Ozone

Preparation

  • Ozone (O3) is prepared by passing oxygen gas (O2) through an electric discharge.

  • Electric discharge breaks O=O bonds in O2 molecules into oxygen atoms.

  • Oxygen atoms recombine with O2 molecules to form ozone: 3O2 \\\xrightarrow{electric\\ discharge} \ 2O3.

Diagram 24 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Properties

  • Ozone is a pale blue gas, dark blue liquid, and violet-black solid.

  • Decomposes to oxygen and atomic oxygen: O3 \\\rightarrow \ O2 + O.

  • Strong oxidizing agent: PbS + 4O3 \\\rightarrow \ PbSO4 + 4O2.

  • Can act as a reducing agent: 2I− + H2O + O3 \\\rightarrow \ 2OH− + I2 + O2.

  • Used for estimation of ozone by titrating I2 with sodium thiosulphate.

  • Reacts with nitric oxide: NO + O3 \\\rightarrow \ NO2 + O2.

Structure

  • Central oxygen atom in ozone is sp2 hybridized.

  • Ozone has an angular (bent) shape.

  • Ozone is a resonance hybrid of two structures with alternating single and double bonds.

  • O–O bond lengths are equal (~128 pm) due to resonance.

Diagram 25 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for ozone preparation from oxygen.
    Answer: 3O2 \\\xrightarrow{electric\\ discharge} \ 2O3.

  • Ex 2: Show the reaction of ozone with PbS.
    Answer: PbS + 4O3 \\\rightarrow \ PbSO4 + 4O2.

Practice Set

  • Q1: What is the hybridization of the central oxygen atom in ozone?
    A. sp
    B. sp2
    C. sp3
    D. sp3d

  • Q2: Which of the following reactions represents ozone acting as an oxidizing agent?
    A. 2I− + H2O + O3 \\\rightarrow \ 2OH− + I2 + O2
    B. PbS + 4O3 \\\rightarrow \ PbSO4 + 4O2
    C. NO + O3 \\\rightarrow \ NO2 + O2
    D. O3 \\\rightarrow \ O2 + O

  • Q3: Calculate the number of ozone molecules formed when 9 molecules of oxygen react under electric discharge.
    A. 6
    B. 9
    C. 3
    D. 12

Answer Key

  • Q1: B. sp2 hybridization gives ozone its angular shape.

  • Q2: B. PbS + 4O3 \\\rightarrow \ PbSO4 + 4O2 shows ozone as oxidizing agent.

  • Q3: A. Using 3O2 \\\rightarrow \ 2O3, 9 O2 molecules produce 6 O3 molecules.

Memory Aids

  • Ozone preparation: \"3 oxygen molecules make 2 ozone molecules with electric spark.\"

  • Ozone structure: \"Resonance makes bonds equal and shape bent (sp2 hybrid).\"

  • Oxidizing action: PbS + O3 \\\rightarrow \ PbSO4 + O2 (remember PbS to PbSO4).

Sulphur Allotropic Forms

Rhombic Sulphur (α-sulphur)

  • Consists of S8 molecules; yellow crystals.

  • Melting point: 385.8 K; specific gravity: 2.06.

  • Formed by evaporating solution of roll sulphur in CS2.

  • Insoluble in water; slightly soluble in benzene, alcohol, ether.

  • Readily soluble in carbon disulfide (CS2).

Monoclinic Sulphur (β-sulphur)

  • Also S8 molecules; colourless needle-shaped crystals.

  • Melting point: 393 K; specific gravity: 1.98.

  • Soluble in CS2.

Structural Details

  • S8 ring in both rhombic and monoclinic sulphur is puckered and crown-shaped.

  • Cyclo S6 ring has a chair form.

Hydrogen Sulfide (H2S)

  • Also called sulphurated hydrogen.

  • Poisonous; fatal in large amounts.

  • Antidote: dilute chlorine oxidizes H2S to sulphur.

  • Reaction: H2S + Cl2 → 2HCl + S

Solved Examples

  • Ex 1: Identify the form of sulphur with melting point 393 K.
    Answer: Monoclinic sulphur (β-sulphur).

  • Ex 2: Write the reaction of H2S with chlorine.
    Answer: H2S + Cl2 → 2HCl + S.

Practice Set

  • Q1: Which sulphur allotrope is yellow and has a melting point of 385.8 K?
    A. Monoclinic sulphur
    B. Rhombic sulphur
    C. Cyclo S6
    D. Amorphous sulphur

  • Q2: What is the shape of the S8 ring in rhombic sulphur?
    A. Chair form
    B. Planar ring
    C. Puckered crown shape
    D. Linear chain

  • Q3: What is the product formed when H2S reacts with chlorine?
    A. HCl and SO2
    B. HCl and S
    C. H2SO4
    D. H2O and S

Answer Key

  • Q1: B. Rhombic sulphur - It is yellow and melts at 385.8 K.

  • Q2: C. Puckered crown shape - S8 rings in rhombic sulphur have this shape.

  • Q3: B. HCl and S - Reaction: H2S + Cl2 → 2HCl + S.

Memory Aids

  • Rhombic sulphur: \"R\" for \"Yellow\" (think of ripe yellow rhombus).

  • S8 ring shape: \"Crown\" shape for both rhombic and monoclinic.

  • H2S antidote: Chlorine \"cleans\" H2S by oxidation.

Sulphur Dioxide

Preparation

  • Direct combustion: S + O2 → SO2

  • Laboratory: Sodium sulfite reacts with acid: SO32- + 2H+ → H2O + SO2

  • Industrial by-product: Roasting of pyrite ore: 4FeS2 + 11O2 → 2Fe2O3 + 8SO2

Physical Properties

  • Colourless gas with pungent smell

  • Highly soluble in water

  • Liquefies at room temperature under 2 atm pressure

  • Boiling point: 263 K

Chemical Properties

  • Reacts with water to form sulfurous acid: SO2 + H2O → H2SO3

  • Reacts with NaOH to form sodium sulfite: SO2 + 2NaOH → Na2SO3 + H2O

  • Sodium sulfite reacts with SO2 and water to form sodium bisulfite: Na2SO3 + SO2 + H2O → 2NaHSO3

  • Reacts with chlorine to form sulfuryl chloride: SO2 + Cl2 → SO2Cl2

  • Oxidation to sulfur trioxide in presence of V2O5 catalyst: 2SO2 + O2 → 2SO3

Diagram 26 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Bleaching Action

  • SO2 acts as a bleaching agent by reducing coloured compounds:

  • SO2 + 2H2O → H2SO4 + 2[H]

  • Coloured matter + [H] → Colourless matter

Reducing Nature

  • Reduces Fe3+ to Fe2+: 2Fe3+ + SO2 + 2H2O → 2Fe2+ + SO42- + 4H+

  • Reduces permanganate ion: 5SO2 + 2MnO4- + 2H2O → 5SO42- + 4H+ + 2Mn2+

Structure

  • SO2 molecule is angular (bent shape)

  • Resonance hybrid of two canonical forms with alternating double and single bonds between S and O atoms

  • Lone pairs on sulfur and oxygen atoms contribute to resonance

  • Resonance explains equal bond lengths and molecular properties

Diagram 27 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction for laboratory preparation of SO2.

  • Solution: Sodium sulfite reacts with acid: SO32- + 2H+ → H2O + SO2

  • Ex 2: Show the reaction of SO2 with NaOH.

  • Solution: SO2 + 2NaOH → Na2SO3 + H2O

Practice Set

  • Q1: Which of the following is a method of SO2 preparation?
    A. S + O2 → SO2
    B. 2SO2 + O2 → 2SO3
    C. SO2 + Cl2 → SO2Cl2
    D. SO3 + H2O → H2SO4

  • Q2: SO2 acts as a bleaching agent because it:
    A. Oxidizes coloured matter
    B. Reduces coloured matter
    C. Forms SO3
    D. Reacts with NaOH

  • Q3: Which statement about SO2 structure is correct?
    A. Linear molecule
    B. Resonance hybrid with angular shape
    C. No lone pairs on sulfur
    D. Single bond only between S and O

Answer Key

  • Q1: A. S + O2 → SO2 is the direct preparation method.

  • Q2: B. SO2 reduces coloured matter, causing bleaching.

  • Q3: B. SO2 is an angular molecule and a resonance hybrid.

Memory Aids

  • SO2 preparation: \"Burning Sulfur\" (S + O2)

  • Bleaching action: SO2 reduces coloured compounds to colourless

  • Structure: Remember \"Bent SO2 with resonance\"

Oxoacids of Sulphur

Structures and Composition

  • Sulphurous acid (H2SO3): Sulfur bonded to 3 oxygen atoms and 2 hydrogens.

  • Sulphuric acid (H2SO4): Sulfur bonded to 4 oxygen atoms and 2 hydrogens.

  • Peroxodisulphuric acid (H2S2O8): Two sulfur atoms connected by an O–O bond, with additional oxygens and hydrogens.

  • Pyrosulphuric acid (Oleum, H2S2O7): Two sulfur atoms connected by one oxygen atom, plus more oxygens and hydrogens.

Diagram 28 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Identify the number of sulfur atoms in H2S2O8.
    Step 1: Look at formula H2S2O8.
    Step 2: Count sulfur atoms = 2.

  • Ex 2: Differentiate between the oxygen linkage in peroxodisulphuric acid and pyrosulphuric acid.
    Step 1: Peroxodisulphuric acid has O–O (peroxo) bond.
    Step 2: Pyrosulphuric acid has single O bridge between sulfurs.

Practice Set

  • Q1: Which acid contains a peroxide (O–O) bond?
    A. Sulphurous acid
    B. Sulphuric acid
    C. Peroxodisulphuric acid
    D. Pyrosulphuric acid

  • Q2: What is the molecular formula of Oleum?
    A. H2SO3
    B. H2SO4
    C. H2S2O7
    D. H2S2O8

  • Q3: How many oxygen atoms are bonded directly to sulfur in sulphuric acid?
    A. 2
    B. 3
    C. 4
    D. 5

Answer Key

  • Q1: C. Peroxodisulphuric acid contains the O–O peroxide bond, unique among these acids.

  • Q2: C. Oleum is pyrosulphuric acid with formula H2S2O7.

  • Q3: C. Sulphuric acid has 4 oxygen atoms bonded directly to sulfur.

Memory Aids

  • \"Peroxo\" means O–O bond: only peroxodisulphuric acid has it.

  • Oleum = Pyrosulphuric acid = two sulfurs + one bridging oxygen.

  • Sulphuric acid has one more oxygen than sulphurous acid.

Sulphuric Acid

General Information

  • Also called oil of vitriol and known as the king of chemicals.

  • Chemical formula: H2SO4.

Preparation (Contact Process)

  • Step 1: Sulfur (S) burns in oxygen (O2) to form sulfur dioxide (SO2).

  • Step 2: SO2 oxidizes to sulfur trioxide (SO3) using V2O5 catalyst.

  • Step 3: SO3 reacts with H2SO4 to form oleum (H2S2O7).

  • Step 4: Oleum is diluted with water to produce concentrated sulfuric acid.

Diagram 29 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Physical Properties

  • Colorless, dense, oily liquid.

  • Specific gravity: 1.8 at 298 K.

  • Dissolution in water is highly exothermic; always add acid to water with stirring.

Chemical Properties

  • Strong dibasic acid: loses two protons stepwise forming HSO4− and SO42−.

  • Reacts with bases (e.g., NaOH) to form normal and acid sulfates.

  • Reacts with metal halides (MX) to produce hydrogen halides (HX) and metal sulfates (M2SO4).

  • Acts as a strong dehydrating agent, removing water from organic compounds (e.g., sugars) leaving carbon.

  • Reacts with metals like Cu and S producing CuSO4, SO2, and H2O.

  • Reacts with carbon to produce CO2, SO2, and H2O.

Diagram 30 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction of SO2 to SO3 in the contact process.
    Answer: SO2 + 1/2 O2 \u000210 V2O5 catalyst \u000214 SO3

  • Ex 2: Reaction of concentrated H2SO4 with sugar (C12H22O11).
    Answer: C12H22O11 + H2SO4 (conc.) \u000214 12 C + 11 H2O (dehydration)

Practice Set

  • Q1: What is the catalyst used in the contact process?
    A. Fe2O3   B. V2O5   C. MnO2   D. Pt

  • Q2: Which product is formed when SO3 reacts with H2SO4?
    A. Sulfuric acid   B. Oleum   C. Sulfur dioxide   D. Sulfur trioxide

  • Q3: Concentrated H2SO4 acts as a dehydrating agent with sugar. What is the main product?
    A. CO2   B. Carbon   C. Water   D. Glucose

Answer Key

  • Q1: B. V2O5 - It catalyzes SO2 oxidation to SO3.

  • Q2: B. Oleum - SO3 reacts with H2SO4 to form oleum (H2S2O7).

  • Q3: B. Carbon - H2SO4 removes water from sugar leaving carbon.

Memory Aids

  • Contact process catalyst: \"V for Vanadium\".

  • Always add acid to water to avoid splashing.

  • Oleum = SO3 + H2SO4.

  • H2SO4 is dibasic: loses 2 protons stepwise.

  • Dehydration of sugar by H2SO4 leaves black carbon.

Group 17 Elements

Overview

  • Members: Fluorine (F), Chlorine (Cl), Bromine (Br), Iodine (I), Astatine (At), Tennessine (Ts).

  • Known as halogens (Greek: halo = salt, genes = born).

  • Highly reactive non-metallic elements; At and Ts are radioactive.

  • General electronic configuration: ns2np5.

Diagram 31 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Physical Properties

  • Atomic and ionic radii increase down the group; halogens are smallest atoms in their periods.

  • Ionisation enthalpy is high but decreases down the group.

  • Electronegativity decreases down the group; Fluorine is the most electronegative.

  • Electron gain enthalpy increases from F to Cl, then decreases to I; F's smaller value due to small size and electron repulsion.

  • Bond dissociation enthalpy increases from F2 to Cl2, then decreases for Br2 and I2; F–F bond weaker due to lone pair repulsions.

  • Melting and boiling points increase down the group.

Chemical Properties

  • Oxidation states: F only -1; others show -1, +1, +3, +5, +7.

  • Higher oxidation states (+1 to +7) seen in fluorides, oxides, and oxoacids of Cl, Br, I.

  • Oxidising power decreases down the group: F2 > Cl2 > Br2 > I2.

Hydrogen Halides

  • Reactivity order to form HX: F2 > Cl2 > Br2 > I2.

  • Boiling points: HF > HI > HBr > HCl.

  • Melting points: HI > HF > HBr > HCl.

  • Bond lengths: HI > HBr > HCl > HF.

  • Bond dissociation enthalpy: HF > HCl > HBr > HI.

  • Acidic strength: HI > HBr > HCl > HF.

  • Thermal stability: HF > HCl > HBr > HI.

  • Reducing power: HI > HBr > HCl > HF.

Oxides

  • Fluorine forms OF2 and O2F2 (oxygen fluorides).

  • Other halogens form oxides with oxidation states from +1 to +7.

Metal Halides

  • Ionic character order: MF > MCl > MBr > MI.

  • Halides in higher oxidation states are more covalent than those in lower states.

  • Iodine does not displace Cl or Br from their halides but displaces them from their oxysalts.

  • Example reaction: 2KCO3 + I2 → 2KIO3 + Cl2.

Solved Examples

Ex 1

Write the general electronic configuration of halogens.

Solution: ns2np5

Ex 2

Arrange halogens in order of oxidising power.

Solution: F2 > Cl2 > Br2 > I2

Ex 3

Predict the product of reaction: 2KCO3 + I2 → ?

Solution: 2KIO3 + Cl2

Practice Set

  • Q1: Which halogen has the highest electronegativity?
    A. Chlorine
    B. Fluorine
    C. Bromine
    D. Iodine

  • Q2: Which hydrogen halide has the highest acidic strength?
    A. HF
    B. HCl
    C. HBr
    D. HI

  • Q3: Which halogen shows only -1 oxidation state?
    A. Chlorine
    B. Bromine
    C. Fluorine
    D. Iodine

Answer Key

  • Q1: B. Fluorine — It is the most electronegative element in the group.

  • Q2: D. HI — Acidic strength increases down the group; HI is strongest acid.

  • Q3: C. Fluorine — Only shows -1 oxidation state due to high electronegativity.

Memory Aids

  • Halogen order in oxidising power: F2 > Cl2 > Br2 > I2.

  • Acidic strength of HX: HI > HBr > HCl > HF.

  • General electronic configuration: ns2np5.

  • Ionic character decreases down the group: MF > MCl > MBr > MI.

Chlorine Preparation

Industrial Methods

  • MnO2 + 4HCl → MnCl2 + 2H2O + Cl2

  • KMnO4 + 8HCl → KCl + MnCl2 + 4H2O + 5Cl2

  • NaCl + H2SO4 + MnO2 → NaHSO4 + MnCl2 + Cl2

  • Deacon’s process: 4HCl + O2 (CuCl2 catalyst) → 2Cl2 + 2H2O

Diagram 32 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Electrolytic Process

  • Electrolysis of brine (concentrated NaCl solution)

  • Chlorine gas is liberated at the anode

Solved Examples

  • Ex 1: Write the reaction for chlorine production using MnO2 and HCl.
    Answer: MnO2 + 4HCl → MnCl2 + 2H2O + Cl2

Practice Set

  • Q1: Which catalyst is used in Deacon’s process?
    A. CuCl2
    B. FeCl3
    C. MnO2
    D. KMnO4

  • Q2: Chlorine is liberated at which electrode during brine electrolysis?
    A. Cathode
    B. Anode
    C. Both electrodes
    D. None

  • Q3: Identify the product formed when KMnO4 reacts with HCl.
    A. KCl + MnCl2 + Cl2
    B. KCl + MnO2 + Cl2
    C. KCl + MnCl2 + H2
    D. KCl + MnO2 + H2

Answer Key

  • Q1: A - CuCl2 acts as catalyst in Deacon’s process for oxidation of HCl to Cl2.

  • Q2: B - Chlorine gas is liberated at the anode during electrolysis of brine.

  • Q3: A - KMnO4 reacts with HCl to form KCl, MnCl2, and Cl2.

Memory Aids

  • Deacon’s process uses CuCl2 catalyst.

  • Electrolysis of brine: Anode → Cl2, Cathode → H2.

  • MnO2 + HCl → Cl2 + MnCl2 + H2O (common lab prep).

Chlorine Physical Properties

Key Characteristics

  • Greenish-yellow gas with pungent, suffocating odor

  • Density about 2.5 times that of air

  • Liquefies easily to greenish-yellow liquid

  • Boiling point: 239 K (-34 °C)

  • Soluble in water forming a pale green solution

Solved Examples

  • Ex 1: What is the color and odor of chlorine gas?
    Answer: Greenish-yellow with pungent, suffocating odor.

Practice Set

  • Q1: Chlorine gas is:
    A. Colorless and odorless
    B. Greenish-yellow with pungent odor
    C. Blue with sweet odor
    D. Red with no odor

  • Q2: The boiling point of chlorine is:
    A. 273 K
    B. 239 K
    C. 300 K
    D. 200 K

  • Q3: Chlorine gas is approximately how many times heavier than air?
    A. 1.5
    B. 2.5
    C. 3.5
    D. 4.5

Answer Key

  • Q1: B - Chlorine is greenish-yellow with a pungent odor.

  • Q2: B - Chlorine boils at 239 K (-34 °C).

  • Q3: B - Chlorine is about 2.5 times heavier than air.

Memory Aids

  • Chlorine color: Greenish-yellow (think \"green\" like leaves).

  • Boiling point below room temp: 239 K (~ -34 °C).

  • Heavier than air: 2.5 times.

Chlorine Chemical Properties

Reactions with Metals and Non-metals

  • 2Al + 3Cl2 → 2AlCl3

  • P4 + 6Cl2 → 4PCl3

  • 2Na + Cl2 → 2NaCl

  • S8 + 4Cl2 → 4S2Cl2

  • 2Fe + 3Cl2 → 2FeCl3

Reactions with Hydrogen Compounds

  • H2S + Cl2 → 2HCl + S

  • C10H16 + 8Cl2 → 16HCl + 10C

Reaction with Ammonia

  • 8NH3 + 3Cl2 → 6NH4Cl + N2 (excess NH3)

  • NH3 + 3Cl2 → NCl3 + 3HCl (excess Cl2)

Reaction with Alkalis

  • 2NaOH + Cl2 → NaCl + NaOCl + H2O (cold, dilute)

  • 6NaOH + 3Cl2 → 5NaCl + NaClO3 + 3H2O (hot, concentrated)

Reaction with Slaked Lime

  • 2Ca(OH)2 + 2Cl2 → Ca(OCl)2 + CaCl2 + 2H2O

As an Oxidizing Agent

  • 2FeSO4 + H2SO4 + Cl2 → Fe2(SO4)3 + 2HCl

  • SO2 + 2H2O + Cl2 → H2SO4 + 2HCl

  • I2 + 6H2O + 5Cl2 → 2HIO3 + 10HCl

As a Bleaching Agent

  • Cl2 + H2O → 2HCl + [O]

  • Coloured substance + [O] → Colourless substance

Solved Examples

  • Ex 1: Write the reaction of chlorine with sodium hydroxide at cold conditions.
    Answer: 2NaOH + Cl2 → NaCl + NaOCl + H2O

  • Ex 2: Reaction of chlorine with ammonia in excess ammonia.
    Answer: 8NH3 + 3Cl2 → 6NH4Cl + N2

Practice Set

  • Q1: What is the product when chlorine reacts with hot concentrated NaOH?
    A. NaCl + NaOCl + H2O
    B. NaCl + NaClO3 + H2O
    C. NaCl + NaClO + H2O
    D. NaCl + NaOH + HCl

  • Q2: Chlorine reacts with ammonia in excess ammonia to form:
    A. NCl3
    B. NH4Cl and N2
    C. NH3Cl
    D. NH4Cl only

  • Q3: Which of the following is NOT a product of chlorine reaction with metals?
    A. AlCl3
    B. FeCl3
    C. NaCl
    D. NH4Cl

Answer Key

  • Q1: B - Hot concentrated NaOH with Cl2 forms NaCl, NaClO3, and water.

  • Q2: B - Excess ammonia reacts with chlorine to give ammonium chloride and nitrogen gas.

  • Q3: D - NH4Cl is formed from ammonia and chlorine, not from metals.

Memory Aids

  • Cold dilute NaOH + Cl2 → Bleach (NaOCl)

  • Hot concentrated NaOH + Cl2 → NaClO3 (chlorate)

  • Excess NH3 + Cl2 → NH4Cl + N2

  • Excess Cl2 + NH3 → NCl3 (explosive)

Hydrogen Chloride

Lab Preparation

  • Industrial Mannheim process involves two steps:

  • At 420 K: NaCl + H2SO4 → NaHSO4 + HCl (gas)

  • At 823 K: NaHSO4 + NaCl → Na2SO4 + HCl (gas)

  • HCl gas is dried by passing through concentrated H2SO4

Diagram 33 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Physical Properties

  • Colourless gas with pungent smell

  • Easily liquefied

  • Highly soluble in water forming hydrochloric acid

Chemical Properties

  • Reacts with salts of weaker acids to decompose them:

  • Na2CO3 + 2HCl → 2NaCl + H2O + CO2

  • Na2SO3 + 2HCl → 2NaCl + H2O + SO2

  • Aqua regia (3 parts conc. HCl + 1 part conc. HNO3) dissolves noble metals:

  • Au + 4H+ + NO3− + 4Cl− → AuCl4− + NO + 2H2O

  • Pt + 16H+ + 4NO3− + 18Cl− → 3PtCl62− + 4NO + 8H2O

Solved Examples

  • Ex 1: Write the reaction for HCl preparation at 420 K in Mannheim process.
    Answer: NaCl + H2SO4 → NaHSO4 + HCl

  • Ex 2: Show reaction of HCl with sodium carbonate.
    Answer: Na2CO3 + 2HCl → 2NaCl + H2O + CO2

Practice Set

  • Q1: Which acid is used to dry HCl gas?
    A. HNO3
    B. Conc. H2SO4
    C. H3PO4
    D. Acetic acid

  • Q2: In the Mannheim process, at what temperature does NaHSO4 react with NaCl?
    A. 300 K
    B. 420 K
    C. 823 K
    D. 1000 K

  • Q3: Aqua regia dissolves gold by forming which complex?
    A. AuCl2−
    B. AuCl3−
    C. AuCl4−
    D. AuCl6−

Answer Key

  • Q1: B - Conc. H2SO4 absorbs moisture and dries HCl gas effectively.

  • Q2: C - At 823 K, NaHSO4 reacts with NaCl to form Na2SO4 and HCl.

  • Q3: C - Gold forms AuCl4− complex in aqua regia.

Memory Aids

  • Mannheim process: Two-step reaction at 420 K and 823 K for HCl production.

  • Drying HCl: Use concentrated H2SO4.

  • Aqua regia ratio: 3 parts HCl + 1 part HNO3 dissolves noble metals.

Oxoacids of Halogens

Properties and Trends

  • Halogens form oxoacids with oxidation states +1, +3, +5, and +7.

  • Thermal stability increases with higher oxidation states.

  • Halogen-oxygen bonds become more covalent as oxidation state rises.

  • Oxidizing power decreases with increasing oxidation number.

  • Acidity increases with higher oxidation states.

  • Electronegativity of halogens remains constant across these acids.

  • Opposite trends observed: electronegativity vs. acid strength and oxidizing power.

Diagram 34 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Identify the acid with highest acidity among HClO, HClO2, HClO3, and HClO4.
    Solution: HClO4 has Cl in +7 oxidation state, highest acidity.

  • Ex 2: Predict the trend in oxidizing power for HBrO, HBrO3, and HBrO4.
    Solution: Oxidizing power decreases from HBrO (+1) to HBrO4 (+7).

Practice Set

  • Q1: Which oxoacid of chlorine is the strongest acid?
    A. HClO
    B. HClO2
    C. HClO3
    D. HClO4

  • Q2: As the oxidation state of halogen in oxoacids increases, which property decreases?
    A. Thermal stability
    B. Acidity
    C. Oxidizing power
    D. Covalent character of bond

  • Q3: Arrange the following oxoacids in order of increasing thermal stability: HIO, HIO3, HIO4.
    A. HIO < HIO3 < HIO4
    B. HIO4 < HIO3 < HIO
    C. HIO3 < HIO < HIO4
    D. HIO < HIO4 < HIO3

Answer Key

  • Q1: D. HClO4 — Highest oxidation state (+7) gives strongest acidity.

  • Q2: C. Oxidizing power — It decreases as oxidation state increases.

  • Q3: A. HIO < HIO3 < HIO4 — Thermal stability increases with oxidation state.

Memory Aids

  • Higher oxidation state → Stronger acid, more stable, less oxidizing.

  • Remember: HClO < HClO2 < HClO3 < HClO4 in acidity.

  • Oxidizing power trend opposite to acidity and stability.

Interhalogen Compounds

Definition and Types

  • Interhalogens are compounds formed by combination of two different halogens.

  • General formulas: XX', XX'3, XX'5, XX'7 where X is the larger halogen and X' is the smaller halogen.

  • Examples: ClF, ICl3, BrF5, IF7.

Preparation

  • Halogen molecules react under controlled temperature and stoichiometric conditions.

  • Key reactions:

    • Cl2 + F2 (437 K) → ClF

    • I2 + excess Cl2 → ICl3

    • Cl2 + excess F2 (573 K) → ClF3

    • BrF3 + F2 (473 K) → BrF5

    • IF5 + F2 (543 K) → IF7

Diagram 35 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Structures

  • Molecular shapes depend on hybridization and number of bonded atoms/groups.

  • Shapes and hybridizations:

    • XX' (2 groups): Linear, sp3 hybridization

    • XX'3 (3 groups): T-shaped, sp3d hybridization

    • XX'5 (5 groups): Square pyramidal, sp3d2 hybridization

    • XX'7 (7 groups): Pentagonal bipyramidal, sp3d3 hybridization

Diagram 36 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Pseudohalogens

  • Ions with two or more electronegative atoms including nitrogen, behaving like halide ions.

  • Examples of pseudohalide ions: CN−, SCN−, OCN−.

  • Corresponding dimeric molecules (pseudohalogens): (CN)2, (SCN)2, (OCN)2.

Solved Examples

  • Ex 1: Write the reaction to prepare ClF3.

  • Step 1: React Cl2 with excess F2 at 573 K.

  • Reaction: Cl2 + 3F2 → 2ClF3

Practice Set

  • Q1: Which interhalogen has a T-shaped molecular geometry?

    • A. ClF

    • B. ICl3

    • C. BrF5

    • D. IF7

  • Q2: What is the hybridization of the central atom in IF7?

    • A. sp3

    • B. sp3d

    • C. sp3d2

    • D. sp3d3

  • Q3: Which reaction conditions are correct for the formation of BrF5?

    • A. BrF3 + F2 at 473 K

    • B. Br2 + F2 at 437 K

    • C. Br2 + Cl2 at 573 K

    • D. BrF3 + Cl2 at 543 K

Answer Key

  • Q1: B. ICl3 - It has T-shaped geometry due to sp3d hybridization with 3 bonded atoms.

  • Q2: D. sp3d3 - IF7 has 7 bonded atoms, pentagonal bipyramidal shape.

  • Q3: A. BrF3 + F2 at 473 K - Correct condition for BrF5 formation.

Memory Aids

  • Interhalogen formulas: Number of X' atoms = 1, 3, 5, or 7 for linear, T-shaped, square pyramidal, pentagonal bipyramidal shapes.

  • Higher fluorine excess and temperature increase fluorination level (e.g., ClF → ClF3).

  • Pseudohalogens mimic halide behavior; remember CN−, SCN−, OCN−.

Group 18 Elements

General Characteristics

  • Elements: He, Ne, Ar, Kr, Xe, Rn, Og

  • All are monoatomic gases, chemically inert, called noble gases

  • General electronic configuration: ns2 np6

  • High ionization enthalpy, decreases down the group

  • Atomic radii increase down the group

  • Electron gain enthalpy is positive; no tendency to gain electrons

  • Melting and boiling points are very low due to weak dispersion forces

  • Chemically least reactive due to stable electronic configuration

Diagram 37 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the electronic configuration of Argon.
    Answer: 1s2 2s2 2p6 3s2 3p6 or [Ne] 3s2 3p6

Practice Set

  • Q1: Which noble gas has the highest ionization enthalpy?
    A. Helium
    B. Neon
    C. Argon
    D. Xenon

  • Q2: Which property increases down the group in noble gases?
    A. Ionization enthalpy
    B. Atomic radius
    C. Electron gain enthalpy
    D. Chemical reactivity

  • Q3: Noble gases are chemically inert because:
    A. They have incomplete octet
    B. They have high ionization enthalpy and positive electron gain enthalpy
    C. They have low atomic size
    D. They have low melting points

Answer Key

  • Q1: A. Helium - Smallest size and highest nuclear charge leads to highest ionization enthalpy.

  • Q2: B. Atomic radius - Increases down the group due to addition of shells.

  • Q3: B. High ionization enthalpy and positive electron gain enthalpy make them inert.

Memory Aids

  • \"He Never Argues Kindly Xenon Radon Oganesson\" - Order of noble gases

  • Stable ns2 np6 configuration = inertness

  • Ionization enthalpy decreases down, atomic size increases down

Xenon-Fluorine Compounds

Reactions and Properties

  • Xe + F2 (excess) at 673 K, 1 bar → XeF2

  • Xe + 5F2 at 873 K, 7 bar → XeF4

  • Xe + 20F2 at 573 K, 60-70 bar → XeF6

  • XeF6 also prepared by: XeF4 + O2F2 → XeF6 + O2 (143 K)

  • XeF2, XeF4, XeF6 are colorless crystalline solids, sublime at 298 K

  • Powerful fluorinating agents, hydrolyzed by water:
    2XeF2 + 2H2O → 2Xe + 4HF + O2

  • React with fluoride ion acceptors/donors to form cations and fluoroanions:
    XeF2 + PF5 → [XeF]+[PF6]−
    XeF4 + SbF5 → [XeF3]+[SbF6]−
    XeF6 + MF → M+[XeF7]− (M = Na, K, Rb, Cs)

Diagram 38 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Write the reaction to prepare XeF4.
    Answer: Xe + 2F2 (1:5 ratio) at 873 K and 7 bar → XeF4

Practice Set

  • Q1: Which xenon fluoride is formed at 673 K and 1 bar?
    A. XeF2
    B. XeF4
    C. XeF6
    D. XeF

  • Q2: XeF6 can be prepared by reaction of XeF4 with:
    A. F2
    B. O2F2
    C. H2O
    D. HF

  • Q3: Hydrolysis of XeF2 produces:
    A. Xe + HF + O2
    B. XeF4
    C. XeO3
    D. XeF6

Answer Key

  • Q1: A. XeF2 - Formed at 673 K, 1 bar with excess fluorine.

  • Q2: B. O2F2 - Reacts with XeF4 to form XeF6.

  • Q3: A. Xe + HF + O2 - Hydrolysis of XeF2 yields these products.

Memory Aids

  • XeF2, XeF4, XeF6 formed by increasing fluorine, temperature, pressure

  • Hydrolysis breaks Xe-F bonds producing Xe, HF, and O2

  • Fluoride ion acceptors/donors form cations and fluoroanions with xenon fluorides

Xenon-Oxygen Compounds

Reactions and Properties

  • 6XeF4 + 12H2O → 4Xe + 2XeO3 + 24HF + 3O2

  • XeF6 + 3H2O → XeO3 + 6HF

  • XeF6 + H2O → XeOF4 + 2HF

  • XeF6 + 2H2O → XeO2F2 + 4HF (partial hydrolysis)

Solved Examples

  • Ex 1: Write the product of complete hydrolysis of XeF6.
    Answer: XeO3 + HF

Practice Set

  • Q1: XeF6 reacts with water to form:
    A. XeO3
    B. XeF4
    C. XeO2F2
    D. XeF2

  • Q2: Partial hydrolysis of XeF6 produces:
    A. XeO3
    B. XeOF4
    C. XeO2F2
    D. XeF4

  • Q3: Which gas is released during hydrolysis of XeF4?
    A. O2
    B. F2
    C. Xe
    D. HF

Answer Key

  • Q1: A. XeO3 - Product of complete hydrolysis of XeF6.

  • Q2: C. XeO2F2 - Formed by partial hydrolysis of XeF6.

  • Q3: A. O2 - Released during hydrolysis of XeF4.

Memory Aids

  • Complete hydrolysis of XeF6 → XeO3

  • Partial hydrolysis → mixed oxo-fluorides like XeO2F2

  • Hydrolysis releases HF and O2

Structures of Xenon Compounds

Molecular Shapes and Hybridization

  • XeF2: Linear shape, sp3d hybridization

  • XeF4: Square planar, sp3d2 hybridization

  • XeF6: Distorted octahedral, sp3d3 hybridization

  • XeO3: Pyramidal shape, sp3 hybridization

  • In solid state, XeF6 forms tetrameric and hexameric units with square pyramidal XeF5+ linked by bent F− bridges

Diagram 39 – NEET Chemistry The p-Block Elements (Group 15 to 18)

Solved Examples

  • Ex 1: Identify the shape of XeF4.
    Answer: Square planar

Practice Set

  • Q1: The hybridization of Xe in XeF2 is:
    A. sp3d
    B. sp3d2
    C. sp3d3
    D. sp2

  • Q2: XeF6 has which molecular geometry in gas phase?
    A. Octahedral
    B. Distorted octahedral
    C. Square planar
    D. Linear

  • Q3: In solid state, XeF6 contains:
    A. Monomeric units
    B. Tetrameric and hexameric units
    C. Only hexameric units
    D. Only tetrameric units

Answer Key

  • Q1: A. sp3d - Hybridization for linear XeF2.

  • Q2: B. Distorted octahedral - Gas phase geometry of XeF6.

  • Q3: B. Tetrameric and hexameric units - Solid state structure of XeF6.

Memory Aids

  • XeF2 linear (sp3d), XeF4 square planar (sp3d2)

  • XeF6 distorted octahedral (sp3d3)

  • Solid XeF6 forms clusters linked by F− bridges

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View
The P Block Elements Group 15 to 18 Notes – NEET Chemistry | Prepzy