NEET UG . NEET Chemistry . Chemistry . The P Block Elements Group 13 and 14

Chapter 20: The p-Block Elements (Group 13 and 14)

Ch 20

NEET Chemistry

NEET UG

"

Introduction to P-Block Elements

General Electronic Configuration

  • Last electron enters outermost p-orbital.

  • General configuration: ns2 np1-6 (except He).

  • Maximum oxidation state = total valence electrons (s + p).

  • Inert pair effect causes oxidation states two less than max.

  • First period elements show anomalous behavior due to smaller size and no d-orbitals.

Solved Examples

  • Ex 1: Determine max oxidation state of group 15 p-block element.
    Solution: ns2 np3 → max oxidation state = 5.

Practice Set

  • Q1: What is the general electronic configuration of p-block elements?
    A. ns2 np1-6 B. ns2 nd1-10 C. ns1 np0 D. ns2 nd0

  • Q2: The inert pair effect causes oxidation states to be lower by how many units?
    A. 1 B. 2 C. 3 D. 4

  • Q3: Why do first period p-block elements show anomalous behavior?
    A. Larger size B. Smaller size and no d-orbitals C. High electronegativity D. High atomic mass

Answer Key

  • Q1: A - General configuration is ns2 np1-6.

  • Q2: B - Oxidation states are two less due to inert pair effect.

  • Q3: B - Smaller size and absence of d-orbitals cause anomalies.

Memory Aids

  • p-block = last electron in p-orbital.

  • Max oxidation state = group number (valence electrons).

  • Inert pair effect lowers oxidation state by 2.

Group 13 Elements: Boron Family

Elements and Properties

  • Elements: B, Al, Ga, In, Tl, Nh.

  • Boron: semi-metal, high ionisation energy, closer to non-metals.

  • Aluminium: metal, chemically similar to boron.

  • Ga, In, Tl, Nh: metallic character increases down the group.

  • Nh is radioactive, chemistry not well established.

Diagram 1 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Identify the element with highest ionisation energy in group 13.
    Solution: Boron (B) has highest ionisation energy.

Practice Set

  • Q1: Which element in group 13 is a semi-metal?
    A. Al B. Ga C. B D. Tl

  • Q2: Which element is radioactive with a half-life of 20 seconds?
    A. In B. Nh C. Tl D. Ga

  • Q3: Which element is the most abundant metal in earth's crust?
    A. B B. Al C. Ga D. In

Answer Key

  • Q1: C - Boron is semi-metal.

  • Q2: B - Nihonium (Nh) is radioactive.

  • Q3: B - Aluminium is most abundant metal.

Memory Aids

  • Boron = semi-metal, high IE.

  • Aluminium = abundant metal.

  • Nh = radioactive, short half-life.

Atomic and Ionic Radii

Trends and Exceptions

  • Group 13 elements smaller than group 2 due to higher nuclear charge.

  • Atomic and ionic radii increase down the group except Ga.

  • Ga atomic radius less than Al due to poor d-electron shielding.

Diagram 2 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Compare atomic radius of Ga and Al.
    Solution: Ga < Al due to d-electron poor shielding.

Practice Set

  • Q1: Which element has smaller atomic radius?
    A. Al B. Ga C. In D. Tl

  • Q2: Why does Ga have smaller radius than Al?
    A. Better shielding B. Poor d-electron shielding C. More electrons D. Less nuclear charge

  • Q3: Ionic radius of M3+ is generally ______ metallic radius.
    A. Larger than B. Equal to C. Smaller than D. Unrelated

Answer Key

  • Q1: B - Ga has smaller radius than Al.

  • Q2: B - Poor d-electron shielding in Ga.

  • Q3: C - Ionic radius smaller than metallic radius for M3+.

Memory Aids

  • Ga radius < Al due to d-electrons.

  • Ionic radius < metallic radius for cations.

Ionisation Enthalpy

Trends and Observations

  • IE values do not decrease smoothly down group 13.

  • Irregularities in Ga and Tl due to d- and f-electron poor shielding.

  • Order: B > Tl > Ga > Al > In for first IE.

  • IEs less than corresponding group 2 elements due to p-electron shielding.

  • IE1 < IE2 < IE3; sum of first three IE very high.

Solved Examples

  • Ex 1: Arrange B, Al, Ga in order of IE.
    Solution: B > Tl > Ga > Al > In.

Practice Set

  • Q1: Which element has highest first ionisation enthalpy?
    A. Al B. Ga C. B D. In

  • Q2: Why is IE of group 13 less than group 2?
    A. More shielding B. Less penetrating p-electrons C. More protons D. Smaller size

  • Q3: Sum of first three IE corresponds to formation of which ion?
    A. M+ B. M2+ C. M3+ D. M4+

Answer Key

  • Q1: C - Boron has highest IE.

  • Q2: B - p-electrons less penetrating than s-electrons.

  • Q3: C - Sum of IE1 to IE3 forms M3+.

Memory Aids

  • IE irregular due to d- and f-electron shielding.

  • IE sum for M3+ very high.

Electronegativity

Trends

  • Electronegativity decreases from B to Al, then increases due to poor d- and f-electron shielding.

  • Group 13 elements more electronegative than groups 1 and 2.

Diagram 3 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Which element has highest electronegativity?
    Solution: Boron (2.0) highest among group 13.

Practice Set

  • Q1: Electronegativity order in group 13 is?
    A. B > Al > Ga B. Al > B > Ga C. B > Ga > Al D. Ga > Al > B

  • Q2: Why does electronegativity increase after Al?
    A. Better shielding B. Poor d- and f-electron shielding C. Larger size D. More protons

  • Q3: Group 13 elements are more electronegative than?
    A. Group 1 B. Group 2 C. Both A and B D. None

Answer Key

  • Q1: C - B > Ga > Al due to shielding effects.

  • Q2: B - Poor shielding increases effective nuclear charge.

  • Q3: C - More electronegative than groups 1 and 2.

Memory Aids

  • Electronegativity dips at Al, then rises.

  • Group 13 > groups 1 and 2 electronegativity.

Physical Properties

Key Points

  • Boron: hard, black solid, many allotropes, very high melting point.

  • Other members: soft metals, low melting points, high electrical conductivity.

  • Gallium: low melting point (303 K), liquid near room temp, high boiling point (2676 K).

  • Density increases down the group from B to Tl.

Solved Examples

  • Ex 1: Why is gallium used in high temperature thermometry?
    Solution: High boiling point and low melting point.

Practice Set

  • Q1: Which element is hardest in group 13?
    A. B B. Al C. Ga D. Tl

  • Q2: Gallium melts at?
    A. 303 K B. 500 K C. 1000 K D. 2676 K

  • Q3: Density trend down group 13 is?
    A. Decreases B. Increases C. Constant D. Random

Answer Key

  • Q1: A - Boron is hardest.

  • Q2: A - Gallium melts at 303 K.

  • Q3: B - Density increases down the group.

Memory Aids

  • Boron = hard, high MP.

  • Gallium = melts near room temp.

  • Density increases down group.

Chemical Properties

Oxidation States and Reactivity

  • Valence config: ns2 np1 → +1 and +3 oxidation states.

  • +1 state stability increases down group due to inert pair effect.

  • Stability order +3: B3+ > Al3+ > Ga3+ > In3+ > Tl3+.

  • Stability order +1: Tl+ > In+ > Ga+ > Al+ > B+.

  • +1 compounds more ionic than +3 compounds.

  • Boron halides (BX3) are electron deficient, act as Lewis acids.

Diagram 4 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write reaction of BX3 with NH3.
    Solution: BX3 + NH3 → {H3N → BX3} (Lewis acid-base complex).

Practice Set

  • Q1: Which oxidation state becomes more stable down group 13?
    A. +3 B. +1 C. 0 D. -1

  • Q2: Order of Lewis acid strength of boron halides?
    A. BF3 < BCl3 < BBr3 < BI3 B. BI3 < BBr3 < BCl3 < BF3 C. BCl3 < BF3 < BI3 < BBr3 D. BBr3 < BI3 < BF3 < BCl3

  • Q3: Which compound forms a dimer?
    A. BCl3 B. AlCl3 C. BF3 D. BI3

Answer Key

  • Q1: B - +1 oxidation state more stable down group.

  • Q2: A - Lewis acid strength increases BF3 < BCl3 < BBr3 < BI3.

  • Q3: B - AlCl3 forms dimer Al2Cl6.

Memory Aids

  • Inert pair effect stabilizes +1 state down group.

  • Boron halides are Lewis acids.

  • AlCl3 forms dimers; BCl3 does not.

Diagram 5 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Reactivity towards Air, Acids, Alkalis, and Halogens

Reactivity towards Air

  • Group 13 elements form trioxides (E2O3) on heating in oxygen.

  • Tl also forms some Tl2O.

Diagram 6 – NEET Chemistry The p-Block Elements (Group 13 and 14)Diagram 7 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Reactivity towards Acids and Alkalis

  • Boron unaffected by non-oxidising acids (dil. HCl, H2SO4).

  • Other elements dissolve in acids forming M3+ salts and liberate H2.

  • Oxidising acids (conc. H2SO4, HNO3) react with all; conc. HNO3 passivates Al.

  • B, Al, Ga react with alkalis liberating H2.

Diagram 8 – NEET Chemistry The p-Block Elements (Group 13 and 14)Diagram 9 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Reactivity towards Halogens

  • Group 13 elements react with halogens to form trihalides (except TlI3).

  • Reaction: 2E(s) + 3X2(g) → 2EX3(s) (X = F, Cl, Br, I).

Solved Examples

  • Ex 1: Write reaction of Al with HCl.
    Solution: 2Al + 6HCl → 2AlCl3 + 3H2.

  • Ex 2: Write reaction of Al with NaOH.
    Solution: 2Al + 2NaOH + 6H2O → 2Na[Al(OH)4] + 3H2.

Practice Set

  • Q1: Which oxide is acidic?
    A. B2O3 B. Al2O3 C. In2O3 D. Tl2O

  • Q2: Which element is not affected by dilute HCl?
    A. B B. Al C. Ga D. Tl

  • Q3: Reaction of group 13 element with halogen forms?
    A. EX B. EX2 C. EX3 D. EX4

Answer Key

  • Q1: A - B2O3 is acidic oxide.

  • Q2: A - Boron unaffected by dilute HCl.

  • Q3: C - Trihalides EX3 formed.

Memory Aids

  • Oxides: B2O3 acidic, Al2O3 amphoteric, others basic.

  • Boron inert to dilute acids.

  • Group 13 + halogens → trihalides.

Important Trends and Anomalous Properties of Boron

Key Characteristics

  • Boron is the first element of group 13 and shows unique behaviour compared to aluminium and others.

  • It has the smallest atomic size and highest ionisation energy in the group.

  • Highest electronegativity among group 13 elements.

  • Maximum covalency of 4 due to absence of d-orbitals; others can have covalency up to 6.

  • Exhibits only +3 oxidation state; others show +1 and +3.

  • Boron halides are monomeric; others form dimeric halides.

  • Does not exhibit inert pair effect unlike heavier group members.

  • Forms volatile, electron-deficient hydrides; others form polymeric hydrides; thallium does not form hydrides.

  • Combines with metals to form borides; others form alloys instead.

Solved Examples

Ex 1: Explain why boron shows only +3 oxidation state while thallium shows +1 and +3.

  • Boron lacks d-orbitals, so it cannot expand its octet; stable oxidation state is +3.

  • Thallium has inert pair effect; s-electrons are less involved, allowing +1 and +3 states.

Ex 2: Why are boron halides monomeric but aluminium halides dimeric?

  • Boron halides have small size and high charge density, forming strong covalent bonds as monomers.

  • Aluminium halides form dimers to satisfy electron deficiency via coordinate bonds.

Practice Set

Q1: Which property of boron is responsible for its anomalous behaviour in group 13?

  • A. Large atomic size

  • B. Low ionisation energy

  • C. Absence of d-orbitals

  • D. Presence of inert pair effect

Q2: Boron forms volatile hydrides because:

  • A. They are electron-rich compounds

  • B. Boron has d-orbitals to expand octet

  • C. They are electron-deficient compounds

  • D. Boron forms ionic hydrides

Q3: Which of the following statements is correct?

  • A. Boron halides are dimeric

  • B. Thallium forms hydrides

  • C. Boron forms borides with metals

  • D. Aluminium shows only +3 oxidation state

Answer Key

Q1: C. Absence of d-orbitals — Boron's lack of d-orbitals limits its covalency and oxidation states.

Q2: C. They are electron-deficient compounds — Boron's hydrides lack sufficient electrons, making them volatile.

Q3: C. Boron forms borides with metals — Boron forms borides; thallium does not form hydrides; boron halides are monomeric; aluminium shows +1 and +3 oxidation states.

Memory Aids

  • Boron’s small size and no d-orbitals = max covalency 4, only +3 state.

  • Halides: Boron monomeric, others dimeric.

  • Hydrides: Boron volatile & electron-deficient; others polymeric; Tl no hydrides.

  • Boron forms borides; others form alloys.

Some Important Compounds of Boron

Borax

  • White crystalline solid: Na2[B4O5(OH)4].8H2O (commonly Na2B4O7.10H2O)

  • Dissolves in water to give alkaline solution: Na2B4O7 + 7H2O → 2NaOH + 4H3BO3

  • On heating, loses water, swells, melts to transparent liquid, then solidifies to glass-like borax bead

  • Borax bead test identifies transition metals by characteristic colours of their metaborates

Diagram 10 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the reaction when borax is heated.

    • Na2B4O7.10H2O (heat) → Na2B4O7 + 10H2O

    • Further heating: Na2B4O7 → 2NaBO2 + B2O3

Practice Set

  • Q1: Borax formula is:

    • A. Na2B4O7.10H2O

    • B. NaBO2

    • C. B2O3

    • D. NaOH

  • Q2: Borax bead test is used to identify:

    • A. Alkali metals

    • B. Transition metals

    • C. Halogens

    • D. Noble gases

  • Q3: On heating borax, which compound is NOT formed?

    • A. NaBO2

    • B. B2O3

    • C. NaOH

    • D. Borax bead

Answer Key

  • Q1: A - Borax is Na2B4O7.10H2O

  • Q2: B - Borax bead test identifies transition metals by their coloured metaborates

  • Q3: C - NaOH is formed in aqueous solution, not on heating borax

Memory Aids

  • Borax bead test: Transition metals give coloured beads

  • Borax formula: Think Na2B4O7.10H2O

Orthoboric Acid

Properties and Preparation

  • White crystalline solid with soapy touch

  • Sparingly soluble in cold water, highly soluble in hot water

  • Prepared by acidifying borax solution: Na2B4O7 + 2HCl + 5H2O → 2NaCl + 4B(OH)3

  • Layered structure with planar BO3 units joined by hydrogen bonds

  • Weak monobasic acid; acts as Lewis acid by accepting OH− electrons: B(OH)3 + 2H2O → [B(OH)4]− + H3O+

Thermal Decomposition

  • On heating above 370 K: H3BO3 → HBO2 (metaboric acid)

  • Further heating: HBO2 → B2O3 (boric oxide)

Diagram 11 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Detection Tests

  • Treated with HF or conc. H2SO4 + CaF2 to form BF3 gas, which gives green flame in Bunsen burner

  • Reaction: H3BO3 + 3HF → 2BF3 + 3H2O

  • With conc. H2SO4 and methyl alcohol, warmed and ignited, gives green flame

    • B(OH)3 + 3CH3OH → B(OCH3)3 + 3H2O

Solved Examples

  • Ex 1: Write the reaction for preparation of orthoboric acid from borax.

    • Na2B4O7 + 2HCl + 5H2O → 2NaCl + 4B(OH)3

Practice Set

  • Q1: Orthoboric acid acts as:

    • A. Strong acid

    • B. Lewis acid

    • C. Base

    • D. Salt

  • Q2: On heating orthoboric acid, the first product formed is:

    • A. Boric oxide

    • B. Metaboric acid

    • C. Borax

    • D. Borazine

  • Q3: BF3 gas formed during detection test imparts which flame colour?

    • A. Red

    • B. Blue

    • C. Green

    • D. Yellow

Answer Key

  • Q1: B - Orthoboric acid is a Lewis acid accepting electrons from OH−

  • Q2: B - Heating orthoboric acid first forms metaboric acid (HBO2)

  • Q3: C - BF3 gas gives green flame in Bunsen burner

Memory Aids

  • Orthoboric acid = Lewis acid, not proton donor

  • Heating sequence: H3BO3 → HBO2 → B2O3

  • BF3 gas → green flame

Diborane

Properties and Preparation

  • Simplest boron hydride: B2H6

    Colourless, highly toxic gas; boiling point 180 K

  • Catches fire spontaneously in air: B2H6 + 3O2 → B2O3 + 3H2O; ΔH° = -1967 kJ/mol

  • Prepared by:

    • BF3 + LiAlH4 → B2H6 + LiF + AlF3

    • NaBH4 + I2 → B2H6 + NaI + H2

    • BF3 + NaH (450 K) → B2H6 + NaF

    Diagram 12 – NEET Chemistry The p-Block Elements (Group 13 and 14)
  • Undergoes hydrolysis: B2H6 + 6H2O → 2H3BO3 + 6H2

  • Cleavage with Lewis bases forms borane adducts: B2H6 + 2NMe3 → 2BH3NMe3

Structure

  • Non-planar; B is sp3 hybridised

  • Four normal 2c–2e B–H bonds in plane

  • Two 3c–2e bridge bonds (banana bonds) above and below plane

Reaction with Ammonia

  • Diborane + NH3 forms addition product

  • On heating, forms borazine (B3N3H6), called inorganic benzene

  • Diagram 13 – NEET Chemistry The p-Block Elements (Group 13 and 14)

    Borazine has alternating BH and NH groups in cyclic structure

Borohydrides

  • Tetrahydridoborates of metals prepared by metal hydrides + B2H6 in diethyl ether

  • LiBH4 and NaBH4 are important reducing agents in organic synthesis

Diagram 14 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the reaction of NaBH4 with I2 to form diborane.

    • NaBH4 + I2 → B2H6 + NaI + H2

Practice Set

  • Q1: Diborane is:

    • A. Solid

    • B. Colourless gas

    • C. Coloured liquid

    • D. Metal

  • Q2: Borazine is called inorganic benzene because:

    • A. It is aromatic and cyclic with alternating BH and NH groups

    • B. It is a hydrocarbon

    • C. It is a metal complex

    • D. It is a salt

  • Q3: Which bond type is present in diborane?

    • A. Only 2c–2e bonds

    • B. Only ionic bonds

    • C. 3c–2e bridge bonds (banana bonds)

    • D. Metallic bonds

Answer Key

  • Q1: B - Diborane is a colourless gas

  • Q2: A - Borazine is aromatic with alternating BH and NH groups

  • Q3: C - Diborane has 3-center 2-electron bridge bonds

Memory Aids

  • Diborane = B2H6, sp3 hybridised B, banana bonds

  • Borazine = inorganic benzene, alternating BH and NH

  • LiBH4, NaBH4 = reducing agents

Uses of Boron and Aluminium

Applications of Boron and Its Compounds

  • Boron fibres: Used in bullet-proof vests and lightweight composite materials for aircraft.

  • Boron-10 isotope (\^{10}B\): High neutron absorption; metal borides used in nuclear reactors as control rods and protective shields.

  • Borax and boric acid: Manufacture of heat-resistant glass (e.g., Pyrex), glass-wool, and fibre glass.

  • Borax: Acts as a flux in soldering metals; provides heat, scratch, and stain-resistant glazed coatings on earthenware.

  • Orthoboric acid solution: Used as a mild antiseptic.

Applications of Aluminium

  • Aluminium: Bright silvery-white metal with high tensile strength.

  • Electrical conductivity: Aluminium's conductivity is twice that of copper.

  • Thermal conductivity: High thermal conductivity makes it useful in heat exchangers.

  • Extensive industrial and everyday use due to lightweight, strength, and conductivity.

Solved Examples

Ex 1: Why is boron-10 used in nuclear reactors?

  • Because \^{10}B\ has a high neutron absorption cross-section, it effectively controls neutron flux.

Ex 2: Calculate the electrical conductivity ratio of aluminium to copper if aluminium's conductivity is twice that of copper.

  • Given: \\\sigma_{Al} = 2 \\times \\sigma_{Cu}\

  • Ratio \= \\frac{\\sigma_{Al}}{\\sigma_{Cu}} = 2\

Practice Set

Q1: Which isotope of boron is used in nuclear reactors for neutron absorption?

  • A. \^{11}B\

  • B. \^{10}B\

  • C. \^{9}B\

  • D. \^{12}B\

Q2: Borax is commonly used as:

  • A. A fuel

  • B. A flux in soldering metals

  • C. A reducing agent

  • D. An oxidizing agent

Q3: Aluminium is preferred over copper in electrical wiring because:

  • A. It has higher tensile strength and twice the electrical conductivity of copper

  • B. It is cheaper and has lower conductivity

  • C. It is heavier and more durable

  • D. It has lower thermal conductivity

Answer Key

Q1: B. \^{10}B\ - It has a high neutron absorption capacity, making it ideal for nuclear control rods.

Q2: B. A flux in soldering metals - Borax lowers melting points and removes oxides during soldering.

Q3: A. It has higher tensile strength and twice the electrical conductivity of copper - Aluminium is lightweight and conducts electricity efficiently.

Memory Aids

  • Boron-10: \"10 absorbs neutrons\" - remember isotope 10 for neutron absorption.

  • Borax uses: Flux and glass - think \"Borax fixes and glazes\".

  • Aluminium conductivity: \"Al is twice Cu\" - aluminium's conductivity is double copper's.

Group 14 Elements

Overview

  • Group 14 contains C, Si, Ge, Sn, Pb, and synthetic Fl (Flerovium).

  • Carbon, silicon, tin, and lead are well-known; germanium is rare; flerovium is radioactive with short half-life.

  • Silicon is the second most abundant element in Earth's crust after oxygen.

  • Electronic configurations follow noble gas shorthand with outer electrons in s and p orbitals.

Diagram 15 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the electronic configuration of Tin (Sn, Z=50).
    Answer: [Kr] 4d10 5s2 5p2

Practice Set

  • Q1: Which element in group 14 is synthetic and radioactive?
    A. Carbon
    B. Silicon
    C. Flerovium
    D. Lead

  • Q2: Which element is the second most abundant in Earth's crust?
    A. Carbon
    B. Silicon
    C. Germanium
    D. Tin

  • Q3: The electronic configuration of lead (Pb) ends with:
    A. 6s2 6p2
    B. 5d10 6s2 6p2
    C. 4f14 5d10 6s2 6p2
    D. 5s2 5p2

Answer Key

  • Q1: C - Flerovium is synthetic and radioactive.

  • Q2: B - Silicon is second most abundant after oxygen.

  • Q3: C - Lead's configuration includes 4f14 and 5d10 filled orbitals.

Memory Aids

  • Group 14 elements: C, Si, Ge, Sn, Pb, Fl (Flerovium).

  • Silicon abundant in crust; Flerovium synthetic and unstable.

Covalent Radius

Trends

  • Covalent radius increases down the group.

  • Increase from Si downwards is small due to poor shielding by d- and f-electrons.

  • Group 14 elements have smaller covalent radii than group 13 elements.

Solved Examples

  • Ex 1: Compare covalent radius of Si and Sn.
    Answer: Sn has larger radius than Si but increase is small due to ineffective shielding.

Practice Set

  • Q1: Covalent radius trend in group 14 is:
    A. Decreases down the group
    B. Increases down the group
    C. Remains constant
    D. Random

  • Q2: Compared to group 13, group 14 elements have:
    A. Larger covalent radii
    B. Smaller covalent radii
    C. Same covalent radii
    D. No trend

  • Q3: The small increase in covalent radius from Si to Sn is due to:
    A. Effective shielding
    B. Ineffective shielding by d- and f-electrons
    C. Increase in nuclear charge
    D. Decrease in atomic size

Answer Key

  • Q1: B - Covalent radius increases down the group.

  • Q2: B - Group 14 elements have smaller covalent radii than group 13.

  • Q3: B - Ineffective shielding by d- and f-electrons causes small increase.

Memory Aids

  • Radius increases down group 14 but less after Si due to poor shielding.

  • Group 14 smaller radius than group 13 due to higher nuclear charge.

Ionisation Enthalpy

Trends

  • Ionisation enthalpy decreases down the group, but not regularly.

  • Order: C > Si > Ge > Sn < Pb (Pb has slightly higher than Sn).

  • Small decrease from Si to Sn; slight increase from Sn to Pb due to poor shielding and atomic size.

  • Group 14 elements have higher ionisation enthalpy than group 13 due to greater nuclear charge and smaller size.

Solved Examples

  • Ex 1: Explain why Pb has higher ionisation enthalpy than Sn.
    Answer: Poor shielding by d- and f-electrons and increased atomic size cause slight increase.

Practice Set

  • Q1: Ionisation enthalpy trend in group 14 is:
    A. Increases down the group
    B. Decreases down the group irregularly
    C. Constant
    D. Random

  • Q2: Which element has the highest ionisation enthalpy?
    A. Carbon
    B. Silicon
    C. Tin
    D. Lead

  • Q3: Ionisation enthalpy of group 14 elements compared to group 13 is:
    A. Lower
    B. Higher
    C. Same
    D. No relation

Answer Key

  • Q1: B - Ionisation enthalpy decreases irregularly down the group.

  • Q2: A - Carbon has highest ionisation enthalpy.

  • Q3: B - Group 14 elements have higher ionisation enthalpy than group 13.

Memory Aids

  • Ionisation enthalpy decreases down group 14 but Pb shows slight increase due to inert pair effect.

  • Group 14 > Group 13 in ionisation enthalpy due to higher nuclear charge.

Electronegativity

Trends

  • Group 14 elements are slightly more electronegative than group 13 due to smaller size.

  • Electronegativity decreases from C to Si.

  • From Si to Pb, electronegativity values are almost constant.

Solved Examples

  • Ex 1: Arrange C, Si, Pb in order of decreasing electronegativity.
    Answer: C > Si > Pb (Pb ~ Si)

Practice Set

  • Q1: Electronegativity trend in group 14 is:
    A. Increases down the group
    B. Decreases down the group
    C. Constant
    D. Random

  • Q2: Compared to group 13, group 14 elements are:
    A. Less electronegative
    B. More electronegative
    C. Same electronegativity
    D. No trend

  • Q3: Electronegativity values from Si to Pb are:
    A. Increasing
    B. Decreasing
    C. Almost same
    D. Random

Answer Key

  • Q1: B - Electronegativity decreases down the group.

  • Q2: B - Group 14 elements are more electronegative than group 13.

  • Q3: C - Values from Si to Pb are almost the same.

Memory Aids

  • Electronegativity decreases from C to Si, then remains steady down to Pb.

  • Group 14 > Group 13 in electronegativity due to smaller atomic size.

Physical Properties

Key Points

  • Melting and boiling points of group 14 elements are higher than group 13 due to four covalent bonds.

  • Strong binding forces exist in solid and liquid states.

  • Melting and boiling points decrease down the group from C to Pb due to weaker M–M bonds from increased atomic size.

Solved Examples

  • Ex 1: Why does carbon have a higher melting point than lead?
    Answer: Carbon forms strong covalent bonds; lead has larger atoms with weaker bonds.

Practice Set

  • Q1: Melting points of group 14 elements:
    A. Increase down the group
    B. Decrease down the group
    C. Remain constant
    D. Random

  • Q2: Compared to group 13, group 14 elements have:
    A. Lower melting points
    B. Higher melting points
    C. Same melting points
    D. No trend

  • Q3: The reason for high melting points in group 14 is:
    A. Ionic bonding
    B. Metallic bonding
    C. Four covalent bonds per atom
    D. Van der Waals forces

Answer Key

  • Q1: B - Melting points decrease down the group.

  • Q2: B - Group 14 elements have higher melting points than group 13.

  • Q3: C - Due to four covalent bonds per atom.

Memory Aids

  • Group 14 elements have high melting points due to strong covalent bonding.

  • Melting points decrease down the group as atomic size increases.

Chemical Properties

Oxidation States and Reactivity

  • Group 14 elements show +4 and +2 oxidation states.

  • C⁴⁺ does not exist due to high ionisation enthalpy and small size; carbon forms negative oxidation states in carbides.

  • Silicon shows similar trends to carbon.

  • Ge, Sn, Pb show +2 and +4 states; +2 state stability increases down the group due to inert pair effect.

  • Compounds with +4 state are covalent; +2 state compounds are ionic (e.g., SnCl4 covalent, SnCl2 ionic).

  • Tendency to form covalent compounds decreases down the group; ionic compounds increase.

Reactivity Towards Oxygen

  • Elements form oxides on heating in air.

  • Reactions: C + O2 → CO2, Si + O2 → SiO2.

  • Monoxides CO, SiO, GeO exist; SiO is unstable.

  • Higher oxidation state oxides are more acidic.

  • PbO exists as red litharge and yellow massicot.

  • Pb3O4 (red lead) is a mixed oxide: 2PbO·PbO3.

Reactivity Towards Water

  • C, Si, Ge are unaffected by water but decompose steam on red heating.

  • Reactions: C + H2O → CO + H2, Si + 2H2O → SiO2 + 2H2.

  • Lead is unaffected by water due to protective oxide film.

Reactivity Towards Halogens

  • Group 14 elements form MX4 and MX2 halides.

  • Tetrahalides are covalent except SnF4 and PbF4 which are ionic.

  • Heavier elements (Ge, Sn, Pb) form stable dihalides MX2 due to inert pair effect.

  • CCl4 does not hydrolyze (no d-orbitals); SiCl4 and heavier halides hydrolyze due to vacant d-orbitals.

  • SiCl4 + 4H2O → Si(OH)4 + 4HCl (silicic acid formation).

  • Thermal stability of tetrahalides decreases down group: CX4 > SiX4 > GeX4 > SnX4 > PbX4.

  • Thermal stability decreases with heavier halogen: MF4 > MCl4 > MBr4 > MI4.

Solved Examples

  • Ex 1: Write the reaction of SiCl4 with water.
    Answer: SiCl4 + 4H2O → Si(OH)4 + 4HCl

Practice Set

  • Q1: Which oxidation states are common in group 14?
    A. +1 and +3
    B. +2 and +4
    C. +3 and +5
    D. +1 and +4

  • Q2: PbO exists in which forms?
    A. Litharge and massicot
    B. Red lead and litharge
    C. Massicot and red lead
    D. Only litharge

  • Q3: Which halide does not hydrolyze?
    A. CCl4
    B. SiCl4
    C. SnCl4
    D. PbCl4

Answer Key

  • Q1: B - +2 and +4 oxidation states are common.

  • Q2: A - PbO exists as litharge (red) and massicot (yellow).

  • Q3: A - CCl4 does not hydrolyze due to lack of d-orbitals.

Memory Aids

  • Inert pair effect increases down group 14, stabilizing +2 state.

  • PbO forms litharge (red) and massicot (yellow).

  • CCl4 is resistant to hydrolysis; SiCl4 hydrolyzes to silicic acid.

Allotropes of Carbon

Overview

  • Carbon exists in different structural forms called allotropes.

  • Main allotropes: Diamond, Graphite, Fullerene (Crystalline); Carbon black, Coke, Charcoal (Amorphous).

  • Allotropes differ in bonding, structure, and properties.

Solved Examples

  • Ex 1: Identify the allotrope of carbon used in jewellery.
    Answer: Diamond, due to its brilliant shine and hardness.

Practice Set

  • Q1: Which allotrope of carbon is the hardest?
    A. Graphite
    B. Diamond
    C. Fullerene
    D. Carbon black

  • Q2: Which allotrope conducts electricity?
    A. Diamond
    B. Graphite
    C. Charcoal
    D. Coke

  • Q3: Fullerene has a structure similar to:
    A. Cube
    B. Soccer ball
    C. Sheet
    D. Chain

Answer Key

  • Q1: B - Diamond is the hardest due to strong 3D covalent bonding.

  • Q2: B - Graphite conducts electricity because of delocalized electrons in layers.

  • Q3: B - Fullerene resembles a soccer ball with carbon atoms arranged in rings.

Memory Aids

  • Diamond = Hardest, 3D network.

  • Graphite = Conducts electricity, layered structure.

  • Fullerene = Soccer ball shape.

Crystalline Allotropes of Carbon

Properties and Structure

  • Diamond: Each carbon atom bonded tetrahedrally to 4 others; very hard; electrical insulator.

  • Graphite: Carbon atoms in layers with weak forces between layers; soft, slippery; conducts electricity.

  • Fullerene: Carbon atoms arranged in spherical shape (C60); resembles soccer ball; unique molecular structure.

Diagram 16 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Explain why graphite is a good lubricant.
    Answer: Layers slide over each other easily due to weak interlayer forces.

Practice Set

  • Q1: Which allotrope has a 3D network structure?
    A. Graphite
    B. Diamond
    C. Fullerene
    D. Carbon black

  • Q2: Why does graphite conduct electricity?
    A. Free electrons between layers
    B. Ionic bonding
    C. Metallic bonding
    D. None of the above

  • Q3: Fullerene is also called:
    A. Graphitic acid
    B. Buckminsterfullerene
    C. Carbon black
    D. Coke

Answer Key

  • Q1: B - Diamond has a strong 3D covalent network.

  • Q2: A - Delocalized electrons between layers allow conductivity.

  • Q3: B - Fullerene is known as Buckminsterfullerene.

Memory Aids

  • Diamond = 3D network, hardest.

  • Graphite = Layers slide, conducts electricity.

  • Fullerene = Buckminsterfullerene, soccer ball shape.

Amorphous Allotropes of Carbon

Characteristics and Preparation

  • Amorphous carbon forms: Carbon black, Coke, Charcoal.

  • Carbon black: Produced by incomplete combustion of hydrocarbons.

  • Charcoal: Obtained by heating wood in absence of air.

  • Coke: Obtained by heating coal in absence of air.

  • These are impure forms of graphite or fullerenes.

Solved Examples

  • Ex 1: How is carbon black prepared?
    Answer: By burning hydrocarbons with limited air supply.

Practice Set

  • Q1: Charcoal is prepared by:
    A. Burning wood in air
    B. Heating wood without air
    C. Burning coal in air
    D. Heating coal with air

  • Q2: Carbon black is used as:
    A. Fuel
    B. Lubricant
    C. Black pigment
    D. Reducing agent

  • Q3: Coke is mainly used as:
    A. Fuel
    B. Reducing agent in metallurgy
    C. Lubricant
    D. Pigment

Answer Key

  • Q1: B - Charcoal is made by heating wood in absence of air.

  • Q2: C - Carbon black is used as black pigment in ink and tyres.

  • Q3: B - Coke is used as a reducing agent in metallurgy.

Memory Aids

  • Carbon black = pigment, incomplete combustion.

  • Charcoal = heated wood, no air.

  • Coke = heated coal, reducing agent.

Uses of Carbon

Applications of Different Allotropes

  • Graphite: Lubricant at high temperatures; refractory material for crucibles and electrodes.

  • Carbon black: Black pigment in ink; filler in automobile tyres.

  • Coal and Charcoal: Used as fuels.

  • Coal: Used to manufacture producer gas and water gas.

  • Coke: Used as reducing agent in metallurgy.

  • Diamond: Used in jewellery for its brilliant shine.

Solved Examples

  • Ex 1: Why is graphite used in electrodes?
    Answer: It withstands high temperatures and conducts electricity.

Practice Set

  • Q1: Which allotrope is used as a lubricant?
    A. Diamond
    B. Graphite
    C. Coke
    D. Charcoal

  • Q2: Producer gas is made from:
    A. Charcoal
    B. Coal
    C. Carbon black
    D. Fullerene

  • Q3: Diamond is mainly used in:
    A. Fuel
    B. Jewellery
    C. Pigment
    D. Reducing agent

Answer Key

  • Q1: B - Graphite acts as a lubricant due to its layered structure.

  • Q2: B - Producer gas is manufactured from coal.

  • Q3: B - Diamond is used in jewellery for its brilliance.

Memory Aids

  • Graphite = lubricant, electrodes.

  • Carbon black = pigment, tyres.

  • Diamond = jewellery.

Chemical Reactions of Graphite

Oxidation Reactions

  • Graphite + Conc. HNO3 → Graphitic acid (C11H4O5).

  • Graphite + Alkaline KMnO4 → Mellitic acid (C6(COOH)6) + Oxalic acid ((COOH)2).

  • These reactions show oxidation of graphite to different acids.

Diagram 17 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the product when graphite is oxidized with conc. HNO3.
    Answer: Graphitic acid (C11H4O5).

Practice Set

  • Q1: Graphite reacts with conc. HNO3 to form:
    A. Oxalic acid
    B. Graphitic acid
    C. Mellitic acid
    D. Carbon black

  • Q2: Alkaline KMnO4 oxidizes graphite to:
    A. Graphitic acid
    B. Oxalic acid and Mellitic acid
    C. Carbon black
    D. Charcoal

  • Q3: Which acid is benzene hexacarboxylic acid?
    A. Graphitic acid
    B. Oxalic acid
    C. Mellitic acid
    D. Citric acid

Answer Key

  • Q1: B - Conc. HNO3 produces graphitic acid.

  • Q2: B - Alkaline KMnO4 yields mellitic and oxalic acids.

  • Q3: C - Mellitic acid is benzene hexacarboxylic acid.

Memory Aids

  • Conc. HNO3 → Graphitic acid.

  • Alkaline KMnO4 → Mellitic + Oxalic acids.

  • Mellitic acid = benzene ring with 6 COOH groups.

Carbon Monoxide

Properties and Preparation

  • Colourless, odourless, poisonous, almost water-insoluble gas.

  • Prepared by:

    • Incomplete combustion of carbon: C + \\\frac{1}{2}\O2 \\\rightarrow\ CO

    • Thermal decomposition of formic acid: HCOOH \\\xrightarrow{\\Delta, H_2SO_4}\ CO + H2O

    • Reaction of carbon with steam (water gas): C + H2O \\\xrightarrow{\\Delta}\ CO + H2

    • Reaction of carbon with air (producer gas): 2C + O2 + N2 \\\xrightarrow{\\Delta}\ 2CO + N2

  • Strong reducing agent; reduces many metal oxides except alkali, alkaline earth, Al, and some transition metals.

  • Forms metal carbonyls by acting as a ligand (donor) to metals.

  • Toxic due to stable complex formation with haemoglobin, preventing oxygen transport.

Diagram 18 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the reaction for preparation of CO from formic acid.

    • HCOOH \\\xrightarrow{\\Delta, H_2SO_4}\ CO + H2O

  • Ex 2: Show the reaction of CO with iron oxide.

    • Fe2O3 + 3CO \\\rightarrow\ 2Fe + 3CO2

Practice Set

  • Q1: Which gas is formed by incomplete combustion of carbon?

    • A. CO2

    • B. CO

    • C. CH4

    • D. H2

  • Q2: CO acts as a reducing agent for which of the following?

    • A. Na2O

    • B. Fe2O3

    • C. CaO

    • D. Al2O3

  • Q3: Why is CO toxic?

    • A. It is acidic

    • B. It forms stable complex with haemoglobin

    • C. It is flammable

    • D. It is water soluble

Answer Key

  • Q1: B - CO is formed by incomplete combustion of carbon.

  • Q2: B - CO reduces Fe2O3 but not alkali or alkaline earth metal oxides.

  • Q3: B - CO binds strongly with haemoglobin, preventing oxygen transport.

Memory Aids

  • CO = Incomplete combustion product, strong reducing agent.

  • CO toxicity due to haemoglobin binding stronger than O2.

  • Metal carbonyls formed by CO acting as ligand.

Carbon Dioxide

Properties and Preparation

  • Colourless, odourless gas; molecular structure: O=C=O with resonance.

  • Prepared by:

    • Complete combustion of carbon or methane: C + O2 \\\rightarrow\ CO2

    • Heating limestone (CaCO3): CaCO3 \\\xrightarrow{\\Delta}\ CaO + CO2

    • Reaction of calcium carbonate with HCl: CaCO3 + 2HCl \\\rightarrow\ CaCl2 + CO2 + H2O

  • Acidic oxide; reacts with bases to form salts.

  • Solid CO2 is dry ice; used as refrigerant.

  • Non-poisonous but excess causes greenhouse effect.

  • Removed from air by photosynthesis: 6CO2 + 12H2O \\\xrightarrow{light, chlorophyll}\ C6H12O6 + 6O2 + 6H2O

Diagram 19 – NEET Chemistry The p-Block Elements (Group 13 and 14)Diagram 20 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the reaction for preparation of CO2 by heating limestone.

    • CaCO3 \\\xrightarrow{\\Delta}\ CaO + CO2

  • Ex 2: Write the photosynthesis equation.

    • 6CO2 + 12H2O \\\xrightarrow{light, chlorophyll}\ C6H12O6 + 6O2 + 6H2O

Practice Set

  • Q1: Which is an acidic oxide?

    • A. CO

    • B. CO2

    • C. SO2

    • D. NO

  • Q2: Dry ice is the solid form of:

    • A. CO

    • B. CO2

    • C. SO2

    • D. N2

  • Q3: Photosynthesis removes CO2 from air by producing:

    • A. Oxygen and glucose

    • B. Carbon monoxide

    • C. Methane

    • D. Water

Answer Key

  • Q1: B - CO2 is an acidic oxide.

  • Q2: B - Dry ice is solid CO2.

  • Q3: A - Photosynthesis produces oxygen and glucose.

Memory Aids

  • CO2 = Acidic oxide, dry ice = solid CO2.

  • Photosynthesis: 6CO2 + 12H2O \\\rightarrow\ glucose + O2.

  • CO2 not poisonous but causes greenhouse effect.

Silicon Dioxide

Properties and Reactions

  • Also called silica; found as sand and quartz.

  • Covalent, 3D network solid with high Si–O bond enthalpy.

  • Almost inert; attacked by HF and NaOH only.

  • Reactions:

    • SiO2 + 2NaOH \\\rightarrow\ Na2SiO3 + H2O

    • SiO2 + 4HF \\\rightarrow\ SiF4 + 2H2O

Uses

  • Quartz used in piezoelectric devices: clocks, radios, TVs, mobile communications.

  • Silica gel used as drying agent and catalyst support.

  • Kieselghur (amorphous silica) used in filtration.

Solved Examples

  • Ex 1: Write reaction of SiO2 with NaOH.

    • SiO2 + 2NaOH \\\rightarrow\ Na2SiO3 + H2O

  • Ex 2: Reaction of SiO2 with HF.

    • SiO2 + 4HF \\\rightarrow\ SiF4 + 2H2O

Practice Set

  • Q1: Silicon dioxide is commonly known as:

    • A. Quartz

    • B. Silica

    • C. Sand

    • D. All of the above

  • Q2: SiO2 reacts with which acid?

    • A. HCl

    • B. HF

    • C. H2SO4

    • D. HNO3

  • Q3: Kieselghur is used in:

    • A. Catalysts

    • B. Filtration

    • C. Electronics

    • D. Medicine

Answer Key

  • Q1: D - Quartz, silica, and sand are forms of SiO2.

  • Q2: B - SiO2 reacts with HF.

  • Q3: B - Kieselghur is used in filtration plants.

Memory Aids

  • SiO2 = quartz, sand, silica; attacked only by HF and NaOH.

  • Quartz = piezoelectric; silica gel = drying agent.

  • Kieselghur = filtration aid.

Silicones

Structure and Preparation

  • Organosilicon polymers with repeating unit (R2SiO).

  • Starting materials: alkyl/aryl substituted silicon chlorides RnSiCl4-n.

  • Prepared by hydrolysis of dialkyldichlorosilanes or diaryldichlorosilanes.

  • Preparation steps:

    • Silicon + methyl chloride (CH3Cl) with Cu catalyst at 573 K forms dimethyldichlorosilane.

    • Hydrolysis replaces Cl with OH forming silanols.

    • Polymerization of silanols releases water and forms silicone polymer.

    • Chain length controlled by adding (CH3)3SiCl to block ends.

Properties and Uses

  • Water repelling due to non-polar alkyl groups.

  • High thermal stability, dielectric strength, and chemical resistance.

  • Used as sealants, greases, electrical insulators, and waterproofing agents.

  • Biocompatible; used in surgical and cosmetic products.

Diagram 21 – NEET Chemistry The p-Block Elements (Group 13 and 14)Diagram 22 – NEET Chemistry The p-Block Elements (Group 13 and 14)

Solved Examples

  • Ex 1: Write the reaction for hydrolysis of dimethyldichlorosilane.

    • (CH3)2SiCl2 + 2H2O \\\rightarrow\ (CH3)2Si(OH)2 + 2HCl

  • Ex 2: Polymerization of silanols.

    • 2 (CH3)2Si(OH)2 \\\rightarrow\ [(CH3)2SiO]n + H2O

Practice Set

  • Q1: Silicones are polymers with repeating unit:

    • A. (SiO2)

    • B. (R2SiO)

    • C. (SiCl4)

    • D. (SiH4)

  • Q2: Which compound is used to control polymer chain length in silicones?

    • A. (CH3)3SiCl

    • B. SiCl4

    • C. H2O

    • D. CH3Cl

  • Q3: Silicones are used as:

    • A. Electrical insulators

    • B. Sealants

    • C. Biocompatible materials

    • D. All of the above

Answer Key

  • Q1: B - Silicones have repeating unit (R2SiO).

  • Q2: A - (CH3)3SiCl blocks polymer chain ends.

  • Q3: D - Silicones are used in all listed applications.

Memory Aids

  • Silicones = (R2SiO) polymers from hydrolysis and polymerization.

  • Chain length controlled by trimethylsilyl chloride.

  • Used as sealants, insulators, and biocompatible materials.

Silicates

Structure and Types

  • Compounds with SiO44− tetrahedral units as basic units.

  • Units may be discrete or linked by sharing 1–4 oxygen atoms forming chains, rings, sheets, or 3D structures.

Zeolites

  • Three-dimensional aluminosilicates with some Si replaced by Al3+.

  • Negative charge balanced by cations (Na+, K+, Ca2+, etc.).

  • Used as ion exchangers for water softening.

  • Act as catalysts in petrochemical industries.

  • ZSM-5 zeolite converts alcohols directly into gasoline.

Solved Examples

  • Ex 1: Describe the basic unit of silicates.

    • SiO44− tetrahedral unit.

  • Ex 2: Name a zeolite used in catalysis.

    • ZSM-5

Practice Set

  • Q1: The basic structural unit of silicates is:

    • A. SiO2

    • B. SiO44−

    • C. AlO45−

    • D. SiCl4

  • Q2: Zeolites are used as:

    • A. Ion exchangers

    • B. Catalysts

    • C. Both A and B

    • D. None

  • Q3: ZSM-5 is used to convert:

    • A. Alcohols to gasoline

    • B. Methane to CO

    • C. CO to CO2

    • D. Water to hydrogen

Answer Key

  • Q1: B - SiO44− is the basic silicate unit.

  • Q2: C - Zeolites act as ion exchangers and catalysts.

  • Q3: A - ZSM-5 converts alcohols to gasoline.

Memory Aids

  • Silicates = SiO44− units linked in various structures.

  • Zeolites = aluminosilicates, ion exchangers, catalysts.

  • ZSM-5 = alcohol to gasoline catalyst.

"

NEET Chemistry — ALL CHAPTERS

1

Some Basic Concepts of Chemistry

View

2

Structure of Atom

View

3

Classification of Elements and Periodicity in Properties

View

4

Chemical Bonding and Molecular Structure

View

5

Thermodynamics

View

6

Equilibrium

View

7

Redox Reactions

View

8

Organic Chemistry - Some Basic Principles and Techniques

View

9

Hydrocarbons

View

10

Solutions

View

11

Electrochemistry

View

12

Chemical Kinetics

View

13

The d- and f- Block Elements

View

14

Coordination Compounds

View

15

Haloalkanes and Haloarenes

View

16

Alcohols, Phenols and Ethers

View

17

Aldehydes, Ketones and Carboxylic Acids

View

18

Amines

View

19

Biomolecules

View

20

The p-Block Elements (Group 13 and 14)

View

21

The p-Block Elements (Group 15 to 18)

View

22

Principles Related to Practical Chemistry

View
The P Block Elements Group 13 and 14 Notes – NEET Chemistry | Prepzy