Class 12 PCM . Physics . Physics Part I . Electrostatic Potential and Capacitance

Chapter 2: Electrostatic Potential And Capacitance

Ch 2

Physics

Class 12 PCM

Electric Potential

Definition and Formula

Electric potential at a point is the work done by an external force in moving a unit positive charge from infinity to that point in an electrostatic field without acceleration. It is a scalar quantity.

Mathematically, electric potential VV is given by:

V=WqV = \frac{W}{q}

where WW is the work done and qq is the charge.

The SI unit of electric potential is volt (V), equivalent to joule per coulomb (J/C).

Potential Difference

Electric potential difference between two points is the work done in moving a unit charge from one point to another in an electric field.

It is expressed as:

ΔV=VB−VA=Wq\Delta V = V_B - V_A = \frac{W}{q}

The work done by the electric field in moving a charge qq over a small displacement dl⃗d\vec{l} is:

dW=qE⃗⋅dl⃗dW = q \vec{E} \cdot d\vec{l}

where E⃗\vec{E} is the electric field vector.

Electric Potential Due to Point Charge

The electric potential VEV_E at a distance rr from a point charge qq is:

VE=14πε0qrV_E = \frac{1}{4 \pi \varepsilon_0} \frac{q}{r}

where ε0\varepsilon_0 is the permittivity of free space.

Electric Dipole and System of Charges

An electric dipole consists of two equal and opposite charges separated by a distance. The potential due to a dipole at a point at distance rr and angle θ\theta with the dipole moment pp is:

V=14πε0pcos⁡θr2V = \frac{1}{4 \pi \varepsilon_0} \frac{p \cos \theta}{r^2}

For a system of charges, the total potential at a point is the algebraic sum of potentials due to individual charges.

Equipotential Surfaces

Equipotential surfaces are surfaces where the electric potential is constant. No work is required to move a charge along such surfaces.

Electric field lines are always perpendicular to equipotential surfaces.

Equipotential surfaces never intersect.

Electric Potential Energy

Potential energy of two point charges q1q_1 and q2q_2 separated by distance r12r_{12} is:

U=14πε0q1q2r12U = \frac{1}{4 \pi \varepsilon_0} \frac{q_1 q_2}{r_{12}}

For three charges, total potential energy is the sum of energies of all pairs.

Potential energy of a charge qq in an external potential V(r⃗)V(\vec{r}) is:

U=qV(r⃗)U = q V(\vec{r})

Potential energy of a dipole in an external electric field E⃗\vec{E} making angle θ\theta with dipole moment pp is:

U(θ)=−pEcos⁡θU(\theta) = -p E \cos \theta

Solved Examples

Example 1: Two point charges q1=10×10−8Cq_1 = 10 \times 10^{-8} \text{C} and q2=−2×10−8Cq_2 = -2 \times 10^{-8} \text{C} are separated by 60 cm in air.

(i) Find the point where the electric potential is zero.

(ii) Calculate the electrostatic potential energy of the system.

Solution:

Let the point be at distance xx from q1q_1. Then distance from q2q_2 is 0.6−x0.6 - x m.

Potential at point due to q1q_1: V1=kq1xV_1 = \frac{k q_1}{x}

Potential at point due to q2q_2: V2=kq20.6−xV_2 = \frac{k q_2}{0.6 - x}

At zero potential, V1+V2=0V_1 + V_2 = 0:

10×10−8x+−2×10−80.6−x=0\frac{10 \times 10^{-8}}{x} + \frac{-2 \times 10^{-8}}{0.6 - x} = 0

Solving, 10/(x)=2/(0.6−x)10/(x) = 2/(0.6 - x) gives x=0.5x = 0.5 m.

Distance from first charge is 0.5 m.

Electrostatic potential energy:

U=kq1q2r=9×109×10×10−8×(−2)×10−80.6=−3×10−5JU = \frac{k q_1 q_2}{r} = \frac{9 \times 10^9 \times 10 \times 10^{-8} \times (-2) \times 10^{-8}}{0.6} = -3 \times 10^{-5} \text{J}

Practice Set

  • Level 1: Define electric potential and state its SI unit.
  • Level 2: Calculate the electric potential at a point 0.2 m away from a charge of 5×10−6C5 \times 10^{-6} \text{C}.
  • Level 3: Two charges +3×10−6C+3 \times 10^{-6} \text{C} and −3×10−6C-3 \times 10^{-6} \text{C} are 0.5 m apart. Find the potential at the midpoint.

Answer Key

  • Level 1: Electric potential is the work done in moving a unit positive charge from infinity to a point in an electric field. SI unit is volt (V).
  • Level 2: V=14πε0qr=9×109×5×10−60.2=225000VV = \frac{1}{4 \pi \varepsilon_0} \frac{q}{r} = 9 \times 10^9 \times \frac{5 \times 10^{-6}}{0.2} = 225000 \text{V}
  • Level 3: Potential at midpoint is sum of potentials due to both charges. Distance from each charge is 0.25 m.
  • V=9×109×(3×10−60.25−3×10−60.25)=0VV = 9 \times 10^9 \times \left( \frac{3 \times 10^{-6}}{0.25} - \frac{3 \times 10^{-6}}{0.25} \right) = 0 \text{V}

Capacitance

Conductors, Insulators and Dielectrics

Conductors allow free movement of charge (e.g., metals, graphite). Insulators do not allow free charge movement (e.g., plastics, glass).

Dielectrics are insulating materials that become polarized in an electric field, inducing dipole moments proportional to the field.

Electric Polarisation

Polarisation PP in dielectrics is related to electric susceptibility XeX_e and electric field EE by:

P=ε0XeEP = \varepsilon_0 X_e E

Dielectric constant K=1+XeK = 1 + X_e, always greater than 1.

Capacitor and Capacitance

A capacitor stores electric charge. It consists of two conducting plates separated by a distance.

Charge stored QQ is proportional to potential difference VV:

Q=CVQ = C V

where CC is capacitance, measured in farads (F).

Capacitors in Series and Parallel

In series, charge on each capacitor is the same, and total voltage is sum of voltages across each capacitor.

Equivalent capacitance in series:

1Ceq=∑1Ci\frac{1}{C_{eq}} = \sum \frac{1}{C_i}

In parallel, voltage across each capacitor is the same, and total charge is sum of charges on each capacitor.

Equivalent capacitance in parallel:

Ceq=∑CiC_{eq} = \sum C_i

Capacitance of Parallel Plate Capacitor

Capacitance with dielectric constant εr\varepsilon_r:

C=εrε0AdC = \frac{\varepsilon_r \varepsilon_0 A}{d}

where AA is plate area and dd is separation.

For multiple dielectric slabs of thickness tit_i and dielectric constants kik_i:

C=ε0A∑tikiC = \frac{\varepsilon_0 A}{\sum \frac{t_i}{k_i}}

Energy Stored in Capacitor

Energy stored UU is:

U=12CV2=12QV=Q22CU = \frac{1}{2} C V^2 = \frac{1}{2} Q V = \frac{Q^2}{2 C}

Solved Examples

Example 2: A dielectric slab of thickness 34d\frac{3}{4} d and dielectric constant KK is inserted between plates of a capacitor separated by distance dd. Find the new capacitance.

Solution:

Electric field without dielectric: E0=V0dE_0 = \frac{V_0}{d}

Electric field in dielectric: E=E0KE = \frac{E_0}{K}

Potential difference:

V=E0×d4+E×3d4=E0d(14+34K)=V0K+34KV = E_0 \times \frac{d}{4} + E \times \frac{3d}{4} = E_0 d \left( \frac{1}{4} + \frac{3}{4K} \right) = V_0 \frac{K + 3}{4K}

Capacitance increases by factor:

C=4KK+3C0C = \frac{4K}{K + 3} C_0

Practice Set

  • Level 1: Define dielectric and give two examples.
  • Level 2: Calculate the equivalent capacitance of three capacitors 2 μF, 3 μF, and 6 μF connected in series.
  • Level 3: A parallel plate capacitor has plate area 0.02 m² and plate separation 1 mm. Calculate its capacitance if the space between plates is filled with a dielectric of constant 5.

Answer Key

  • Level 1: Dielectric is an insulating material that increases capacitance when placed between capacitor plates. Examples: glass, mica.
  • Level 2: 1Ceq=12+13+16=1⇒Ceq=1μF\frac{1}{C_{eq}} = \frac{1}{2} + \frac{1}{3} + \frac{1}{6} = 1 \Rightarrow C_{eq} = 1 \mu F
  • Level 3: C=εrε0Ad=5×8.85×10−12×0.021×10−3=8.85×10−10F=0.885nFC = \frac{\varepsilon_r \varepsilon_0 A}{d} = \frac{5 \times 8.85 \times 10^{-12} \times 0.02}{1 \times 10^{-3}} = 8.85 \times 10^{-10} \text{F} = 0.885 \text{nF}

Quick Reference Table

Electric Potential: V=WqV = \frac{W}{q}, unit: volt (V)

Potential due to point charge: V=14πε0qrV = \frac{1}{4 \pi \varepsilon_0} \frac{q}{r}

Capacitance of parallel plate capacitor: C=εrε0AdC = \frac{\varepsilon_r \varepsilon_0 A}{d}

Capacitors in series: 1Ceq=∑1Ci\frac{1}{C_{eq}} = \sum \frac{1}{C_i}

Capacitors in parallel: Ceq=∑CiC_{eq} = \sum C_i

Energy stored in capacitor: U=12CV2U = \frac{1}{2} C V^2

Common Mistakes and Misconceptions

  • Confusing electric potential (scalar) with electric field (vector).
  • Incorrect unit conversions, especially for capacitance (e.g., microfarads to farads).
  • Misapplying capacitance formulas without considering geometry and dielectric properties.
  • Assuming potential difference is always positive; it depends on direction.
  • For capacitors in series, forgetting that charge is the same on all capacitors.
  • For capacitors in parallel, forgetting that voltage across each capacitor is the same.

Glossary

  • Electric Potential: Work done per unit charge in bringing a charge from infinity to a point.
  • Capacitance: Ability of a capacitor to store charge per unit voltage.
  • Dielectric: Insulating material that increases capacitance when placed between capacitor plates.
  • Equipotential Surface: Surface where electric potential is constant.
  • Electric Dipole: Two equal and opposite charges separated by a distance.
  • Polarisation: Alignment of dipoles in a dielectric under an electric field.

Physics — ALL CHAPTERS

1

Electric Charges And Fields

View

2

Electrostatic Potential And Capacitance

View

3

Current Electricity

View

4

Moving Charges And Magnetism

View

5

Magnetism And Matter

View

6

Electromagnetic Induction

View

7

Alternating Current

View

8

Electromagnetic Waves

View

1

Ray Optics And Optical Instruments

View

2

Wave Optics

View

3

Dual Nature Of Radiation And Matter

View

4

Atoms

View

5

Nuclei

View

6

Semiconductor Electronics: Materials, Devices And Simple Circuits

View
Electrostatic Potential and Capacitance Notes – Class 12 | Prepzy