Class 10 . Mathematics . Mathematics . Statistics

Chapter 13: Statistics 

Ch 13

Mathematics

Class 10

Lecture 1

Introduction & Mean Of Grouped Data

Reference video · Lecture 1Introduction & Mean Of Grouped Data

Introduction

Scope of the chapter

  • Data organisation: Data may be presented as ungrouped observations or as grouped frequency distributions.
  • Earlier representations: Bar graphs, histograms and frequency polygons display data visually.
  • Central tendency: Mean, median and mode represent the centre of a data set.
  • This chapter: Extends these measures to grouped data and later studies cumulative frequency distributions and ogives.

Mean of a Frequency Distribution

Definition

Mean — The mean is the sum of all observations divided by the total number of observations.

Mean for observations with frequencies

If the value xix_i occurs fif_i times, then its contribution to the total is fixif_i x_i. The total number of observations is ∑fi\sum f_i.

Mean of a frequency distribution
xˉ=∑i=1nfixi∑i=1nfi\bar{x}=\frac{\sum_{i=1}^{n} f_i x_i}{\sum_{i=1}^{n} f_i}

Use when values and their frequencies are given.

Worked example

Find the mean marks when ∑fi=30\sum f_i=30 and ∑fixi=1779\sum f_i x_i=1779.

  1. For the marks data, the total frequency is 3030 and the sum of frequency-weighted marks is 17791779.
    ∑fi=30,∑fixi=1779\sum f_i=30,\qquad \sum f_i x_i=1779
  2. Apply the frequency mean formula.
    xˉ=∑fixi∑fi=177930=59.3\bar{x}=\frac{\sum f_i x_i}{\sum f_i}=\frac{1779}{30}=59.3
Answer: The mean is 59.359.3 marks.

Mean of Grouped Data: Direct Method

Definition

Class mark — The class mark is the midpoint of a class interval and is used as the representative value for that class.

Grouped data essentials

  • Class intervals: Grouping condenses a large set of observations into intervals with frequencies.
  • Boundary convention: A value at an upper class limit is counted in the next interval; for example, 4040 belongs to 4040–5555, not 2525–4040.
  • Midpoint assumption: Treat observations in each class as concentrated at its class mark; therefore, a grouped-data mean is generally approximate.
  • Direct method: Multiply each class mark by its frequency, add the products, then divide by the total frequency.
Class mark
xi=L+U2x_i=\frac{L+U}{2}

Here, LL is the lower class limit and UU is the upper class limit.

Direct method for grouped mean
xˉ=∑fixi∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i}

Use the class marks as the representative values xix_i.

Direct method steps

  1. Find each class mark from the class limits.
    xi=L+U2x_i=\frac{L+U}{2}
  2. Calculate each product of frequency and class mark.
    fixif_i x_i
  3. Add the frequencies and the products, then divide.
    xˉ=∑fixi∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i}
Worked example

Find the grouped mean for class intervals 1010–2525, 2525–4040, 4040–5555, 5555–7070, 7070–8585, 8585–100100 with frequencies 2,3,7,6,6,62,3,7,6,6,6.

  1. For the six mark intervals, the frequencies are 2,3,7,6,6,62,3,7,6,6,6 and the class marks are 17.5,32.5,47.5,62.5,77.5,92.517.5,32.5,47.5,62.5,77.5,92.5.
    ∑fi=30\sum f_i=30
  2. The corresponding products add to 18601860.
    ∑fixi=2(17.5)+3(32.5)+7(47.5)+6(62.5)+6(77.5)+6(92.5)=1860\sum f_i x_i=2(17.5)+3(32.5)+7(47.5)+6(62.5)+6(77.5)+6(92.5)=1860
  3. Calculate the grouped mean using the direct method.
    xˉ=186030=62\bar{x}=\frac{1860}{30}=62
Answer: The grouped mean is approximately 6262 marks.
⚠ Common mistake

Do not treat a grouped mean as necessarily exact: replacing every observation by its class mark introduces the midpoint assumption. For the same marks data, the exact ungrouped mean is 59.359.3, whereas the grouped estimate is 6262.

Assumed Mean Method

Definition

Assumed mean — An assumed mean is a convenient class mark, usually near the centre, chosen to simplify the grouped-mean calculations.

Mean using deviations

If di=xi−ad_i=x_i-a, then the mean deviation is dˉ=∑fidi∑fi\bar{d}=\frac{\sum f_i d_i}{\sum f_i} and the actual mean is xˉ=a+dˉ\bar{x}=a+\bar{d}.

xˉ=a+∑fidi∑fi\bar{x}=a+\frac{\sum f_i d_i}{\sum f_i}

Assumed mean steps

  1. Choose a convenient class mark as the assumed mean aa.
  2. Find each deviation from the assumed mean.
    di=xi−ad_i=x_i-a
  3. Multiply each deviation by its frequency and find the totals.
    ∑fidi,∑fi\sum f_i d_i,\qquad \sum f_i
  4. Add the mean deviation to the assumed mean.
    xˉ=a+∑fidi∑fi\bar{x}=a+\frac{\sum f_i d_i}{\sum f_i}
Worked example

Find the grouped mean for the data in the direct-method example using a=47.5a=47.5.

  1. Choose a=47.5a=47.5. For the class marks 17.5,32.5,47.5,62.5,77.5,92.517.5,32.5,47.5,62.5,77.5,92.5, the deviations are −30,−15,0,15,30,45-30,-15,0,15,30,45.
    di=xi−47.5d_i=x_i-47.5
  2. Using frequencies 2,3,7,6,6,62,3,7,6,6,6, the weighted deviations total 435435, and the total frequency is 3030.
    ∑fidi=2(−30)+3(−15)+7(0)+6(15)+6(30)+6(45)=435,∑fi=30\sum f_i d_i=2(-30)+3(-15)+7(0)+6(15)+6(30)+6(45)=435,\qquad \sum f_i=30
  3. Add the mean deviation to aa to obtain the grouped mean.
    xˉ=47.5+43530=47.5+14.5=62\bar{x}=47.5+\frac{435}{30}=47.5+14.5=62
Answer: The grouped mean is approximately 6262 marks.
⚠ Common mistake

Keep the sign of every deviation: class marks below aa have negative deviations and those above aa have positive deviations. The assumed mean is only a calculation aid, not the final mean.

Practice

Find the mean for values xi=2,4,6x_i=2,4,6 with frequencies fi=3,2,5f_i=3,2,5.

Hint: Find ∑fixi\sum f_i x_i and ∑fi\sum f_i.
Key step: ∑fixi=6+8+30=44\sum f_i x_i=6+8+30=44 and ∑fi=10\sum f_i=10.
Solution: xˉ=4410=4.4\bar{x}=\frac{44}{10}=4.4.
Practice

Find the grouped mean for intervals 00–1010, 1010–2020, 2020–3030 with frequencies 2,5,32,5,3.

Hint: Use the class marks 5,15,255,15,25.
Key step: ∑fixi=2(5)+5(15)+3(25)=150\sum f_i x_i=2(5)+5(15)+3(25)=150; ∑fi=10\sum f_i=10.
Solution: The grouped mean is xˉ=15010=15\bar{x}=\frac{150}{10}=15.

Quick recap

  • For values with frequencies, the mean is xˉ=∑fixi∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i}.
  • A class mark is the midpoint xi=L+U2x_i=\frac{L+U}{2} of its class interval.
  • The direct method uses class marks and their frequency-weighted products.
  • Grouped means are usually approximate because class marks represent all observations in each interval.
  • The assumed mean method uses deviations di=xi−ad_i=x_i-a to reduce calculation size.
  • Recover the mean with xˉ=a+∑fidi∑fi\bar{x}=a+\frac{\sum f_i d_i}{\sum f_i}.
Lecture 2

Mean Of Grouped Data (Activity )

Reference video · Lecture 2Mean Of Grouped Data (Activity )

Step-Deviation Method and Choosing a Method

Wickets data used in the worked example
WicketsNumber of bowlers (fif_i)Class mark (xix_i)
2020–6060774040
6060–100100558080
100100–1501501616125125
150150–2502501212200200
250250–35035022300300
350350–45045033400400
Equivalence of the three methods

The direct, assumed-mean and step-deviation methods give the same mean. Since ui=xi−ahu_i = \frac{x_i-a}{h}, their relationship is xˉ=a+huˉ\bar{x}=a+h\bar{u}.

xˉ=a+h∑fiui∑fi\bar{x} = a + h\frac{\sum f_i u_i}{\sum f_i}
Worked example

Find the mean number of wickets taken by the bowlers.

  1. For the wickets data, take a=200a=200 and h=20h=20. Calculate ui=(xi−a)/hu_i=(x_i-a)/h for each class mark.
    ui=−8, −6, −3.75, 0, 5, 10u_i = -8,\ -6,\ -3.75,\ 0,\ 5,\ 10
  2. Multiply each coded deviation by its frequency and add the products; the frequency total is 4545.
    ∑fiui=−56−30−60+0+10+30=−106,∑fi=45\sum f_i u_i = -56-30-60+0+10+30=-106, \qquad \sum f_i=45
  3. Apply the step-deviation formula.
    xˉ=200+20(−10645)=152.888…\bar{x}=200+20\left(\frac{-106}{45}\right)=152.888\ldots
Answer: The mean is approximately 152.89152.89 wickets. It represents the average number of wickets taken by the 4545 bowlers.
Practice

For female-teacher percentages, the class marks are 20,30,40,50,60,70,8020,30,40,50,60,70,80 and frequencies are 6,11,7,4,4,2,16,11,7,4,4,2,1. Using a=50a=50 and h=10h=10, find the mean.

Hint: Use the step-deviation method and find ∑fiui\sum f_i u_i.
Key step: The totals are ∑fi=35\sum f_i=35 and ∑fiui=−36\sum f_i u_i=-36.
Solution: xˉ=50+10(−3635)=39.714…\bar{x}=50+10\left(\frac{-36}{35}\right)=39.714\ldots. The mean percentage is approximately 39.71%39.71\%.
Practice

A grouped distribution has a=47.5a=47.5, h=15h=15, ∑fiui=29\sum f_i u_i=29, and ∑fi=30\sum f_i=30. Find its mean.

Hint: Substitute directly into the step-deviation formula.
Key step: Calculate 47.5+15(2930)47.5+15\left(\frac{29}{30}\right).
Solution: xˉ=47.5+14.5=62\bar{x}=47.5+14.5=62.
⚠ Common mistake

Do not use xˉ=a+h∑fiui∑fi\bar{x}=a+h\frac{\sum f_i u_i}{\sum f_i} without multiplying the coded-deviation average by hh. Also, use class marks—not class limits—in the mean calculation.

✎ Exam tip

Choose the direct method when the values are small. For larger values, use the assumed-mean or step-deviation method; step-deviation is especially convenient when deviations share a common factor.

Quick recap

  • Find each class mark using the midpoint of its class interval.
  • The direct mean is xˉ=∑fixi∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i}.
  • For assumed mean, use di=xi−ad_i=x_i-a and xˉ=a+∑fidi∑fi\bar{x}=a+\frac{\sum f_i d_i}{\sum f_i}.
  • For step-deviation, use ui=xi−ahu_i=\frac{x_i-a}{h} and xˉ=a+h∑fiui∑fi\bar{x}=a+h\frac{\sum f_i u_i}{\sum f_i}.
  • All three methods produce the same mean; choose the one that simplifies the arithmetic.
  • Unequal class sizes do not prevent step-deviation when a suitable non-zero hh is chosen.
Lecture 3

Mode Of Grouped Data

Reference video · Lecture 3Mode Of Grouped Data

Mode of Ungrouped Data

Definition

Mode — The mode is the observation that occurs most often—the value with the greatest frequency.

Key points

  • Multimodal data: If more than one value shares the maximum frequency, the data has more than one mode.
  • Ungrouped data: Count the frequency of each distinct value; the value with the highest count is the mode.
Cricket wickets example
Wickets0123456
Number of matches1132111
Conclusion——22 occurs most often————

Mode of Grouped Data

Definition

Modal class — The class interval with the highest frequency is called the modal class; the mode is an estimated value within this class.

Key points

  • Grouped frequencies: They do not reveal the exact most frequent observation; they identify the modal class.
  • Scope: This method is used here for grouped distributions with a single mode.
  • Class widths: The formula below assumes equal class sizes. Unequal class sizes require a different treatment.
Grouped-data mode

For equal class sizes, estimate the mode from the modal class and the frequencies of the classes immediately before and after it.

l+f1−f02f1−f0−f2×hl+\frac{f_1-f_0}{2f_1-f_0-f_2}\times h
Mode of grouped data
Mode=l+f1−f02f1−f0−f2×h\text{Mode}=l+\frac{f_1-f_0}{2f_1-f_0-f_2}\times h

Use for a single-mode grouped distribution with equal class sizes.

Symbols

  • ll: Lower limit of the modal class.
  • hh: Class size, assuming equal class sizes.
  • f1f_1: Frequency of the modal class.
  • f0f_0 and f2f_2: Frequencies of the classes immediately before and after the modal class.

Finding the grouped-data mode

  1. Identify the class with the greatest frequency; this is the modal class.
  2. Read off ll, hh, f1f_1, f0f_0, and f2f_2 from the table.
  3. Substitute these values into the formula and calculate the estimated mode.
Worked example

Find the mode of the grouped family-size data.

  1. The family-size intervals and frequencies are 11–3:73:7, 33–5:85:8, 55–7:27:2, 77–9:29:2, and 99–11:111:1. The modal class is 33–55.
  2. Use l=3l=3, h=2h=2, f1=8f_1=8, f0=7f_0=7, and f2=2f_2=2.
  3. Substitute into the grouped-data mode formula.
    3+8−72(8)−7−2×2=3+27≈3.2863+\frac{8-7}{2(8)-7-2}\times2=3+\frac{2}{7}\approx3.286
Answer: The estimated mode is approximately 3.2863.286 family members.

Interpreting mode and mean

  • Mode: Describes the value or level occurring most often; in the marks example, the mode was 5252 marks.
  • Mean: Describes the average across all observations; in that example, the mean was 6262 marks.
  • Comparison: Mode may be less than, equal to, or greater than the mean. Choose the measure that matches the question.
  • Use: Mean answers questions about the overall average; mode answers questions about what occurs most often.
⚠ Common mistake

Do not use only the modal-class frequency: f0f_0 and f2f_2 are the frequencies of the immediately preceding and succeeding classes. The formula assumes equal class sizes and a single mode.

Practice

For class intervals 00–1010, 1010–2020, 2020–3030, and 3030–4040, the frequencies are 44, 99, 1212, and 55. Find the mode.

Hint: The modal class is 2020–3030; use its adjacent class frequencies.
Key step: Use l=20l=20, h=10h=10, f1=12f_1=12, f0=9f_0=9, and f2=5f_2=5.
Solution: 20+12−92(12)−9−5×10=2320+\frac{12-9}{2(12)-9-5}\times10=23. The estimated mode is 2323.
Practice

Marks are grouped into 4545–5555, 5555–6565, and 6565–7575 with frequencies 44, 77, and 66. If the mean is 6262, find the mode and compare it with the mean.

Hint: The modal class is 5555–6565.
Key step: Use l=55l=55, h=10h=10, f1=7f_1=7, f0=4f_0=4, and f2=6f_2=6.
Solution: 55+7−42(7)−4−6×10=62.555+\frac{7-4}{2(7)-4-6}\times10=62.5. The estimated mode is 62.562.5, which is greater than the mean of 6262.

Quick recap

  • Mode is the observation with the greatest frequency; tied maximum frequencies make ungrouped data multimodal.
  • For grouped data, the class with the highest frequency is the modal class; this lecture's method considers a single mode.
  • For equal class sizes, use Mode=l+f1−f02f1−f0−f2×h\text{Mode}=l+\frac{f_1-f_0}{2f_1-f_0-f_2}\times h.
  • f0f_0 and f2f_2 are the frequencies of the classes immediately before and after the modal class.
  • Mode describes what occurs most often, while mean describes the overall average; mode may be below, equal to, or above mean.
Lecture 4

Median Of Grouped Data

Reference video · Lecture 4Median Of Grouped Data

Median of Ungrouped Data

Median of Ungrouped Data
Median={x(n+1)/2,n odd,xn/2+xn/2+12,n even\text{Median}=\begin{cases}x_{(n+1)/2},&n\text{ odd},\\[2pt]\dfrac{x_{n/2}+x_{n/2+1}}{2},&n\text{ even}\end{cases}

Use the middle observation for odd nn and average the two middle observations for even nn.

Worked example

Find the median of the marks-frequency data in the table.

  1. There are 100100 students, so the middle positions are the 5050th and 5151st observations.
    n=100,n2=50n=100,\qquad \frac{n}{2}=50
  2. From the cumulative frequencies, the 5050th observation is 2828 and the 5151st is 2929.
    x50=28,x51=29x_{50}=28,\qquad x_{51}=29
  3. Average the two middle observations.
    Median=28+292=28.5\text{Median}=\frac{28+29}{2}=28.5
Answer: The median is 28.528.5 marks.

Cumulative Frequency

Worked example

Find the less-than cumulative frequency below 2020 and the more-than cumulative frequency at 2020.

  1. For the less-than cumulative frequency below 2020, add frequencies for the intervals 00–1010 and 1010–2020.
    5+3=85+3=8
  2. For the more-than cumulative frequency at 2020, subtract the frequencies below 2020 from the total.
    53−5−3=4553-5-3=45
Answer: The less-than cumulative frequency is 88; the more-than cumulative frequency is 4545.

Median of Grouped Data

Median of Grouped Data
Median=l+(n2−cff)h\text{Median}=l+\left(\frac{\frac{n}{2}-cf}{f}\right)h

Use this formula after locating the median class; hh is its class width.

Finding the Grouped-Data Median

  1. Add the frequencies to find the total number of observations.
    n=∑fn=\sum f
  2. Calculate half the total and use cumulative frequencies to find the median class.
    n2\frac{n}{2}
  3. Identify the lower limit ll, preceding cumulative frequency cfcf, median-class frequency ff, and class width hh.
  4. Substitute into the grouped-data median formula and simplify.
    Median=l+(n2−cff)h\text{Median}=l+\left(\frac{\frac{n}{2}-cf}{f}\right)h
Worked example

Find the median of the grouped marks distribution of 5353 students.

  1. There are 5353 students, so half the observations is 26.526.5. The first cumulative frequency at least this large is 2929, for class 6060–7070.
    n=53,n2=26.5n=53,\qquad \frac{n}{2}=26.5
  2. Read the required values from the median class and the class before it.
    l=60,cf=22,f=7,h=10l=60,\qquad cf=22,\qquad f=7,\qquad h=10
  3. Substitute into the median formula.
    Median=60+(26.5−227)10\text{Median}=60+\left(\frac{26.5-22}{7}\right)10
  4. Simplify and round to one decimal place.
    Median=60+457≈66.4\text{Median}=60+\frac{45}{7}\approx66.4
Answer: The estimated median is approximately 66.466.4 marks.
⚠ Common mistake

Do not use the cumulative frequency of the median class for cfcf; use the cumulative frequency of the class immediately before it.

Practice

Find the median for the grouped data: 00–1010: 44, 1010–2020: 66, 2020–3030: 1010, 3030–4040: 88, 4040–5050: 22.

Hint: Find the cumulative frequencies and locate the median class using n2\frac{n}{2}.
Key step: Here n=30n=30; the median class is 2020–3030 and its preceding cumulative frequency is 1010.
Solution: n=30n=30, so n2=15\frac{n}{2}=15. Thus l=20l=20, cf=10cf=10, f=10f=10, and h=10h=10: Median=20+(15−1010)10=25\text{Median}=20+\left(\frac{15-10}{10}\right)10=25.
Practice

For the grouped distribution 00–1010: 55, 1010–2020: 33, 2020–3030: 44, find the less-than cumulative frequency below 3030 and the more-than cumulative frequency at 1010.

Hint: Add frequencies for the less-than total; subtract frequencies below the boundary from the total for the more-than total.
Key step: The total frequency is 1212; the cumulative frequency below 3030 includes all three classes.
Solution: Less-than below 3030: 5+3+4=125+3+4=12. More-than at 1010: 12−5=712-5=7.

Quick recap

  • Arrange ungrouped observations in order; use the middle value or average the two middle values.
  • Less-than cumulative frequency is built by successive addition; more-than cumulative frequency is built by successive subtraction.
  • For grouped data, the median class is the first class whose cumulative frequency is at least n2\frac{n}{2}.
  • Use Median=l+(n2−cff)h\text{Median}=l+\left(\frac{\frac{n}{2}-cf}{f}\right)h for equal-sized classes.
  • In the grouped-data formula, cfcf is the cumulative frequency before the median class.
Lecture 5

Median Of Grouped Data ( Examples Continue)

Reference video · Lecture 5Median Of Grouped Data ( Examples Continue)

Median from a Less-Than Cumulative Frequency Table

Definition

Cumulative frequency — The cumulative frequency of a class is the total frequency up to and including that class.

  • Convert to class frequencies: For a less-than table, take successive differences between cumulative frequencies; the first cumulative frequency is the first class frequency.
  • Median class: It is the class whose cumulative frequency first reaches or exceeds n/2n/2.
Median of grouped data

For continuous grouped data, use the median class and the formula below; ll is its lower limit, cfcf is the cumulative frequency before it, ff is its frequency, and hh is its class width.

Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h
Grouped-data median
Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h

Use after identifying the median class.

Find a median from less-than data

  1. Convert cumulative frequencies into class frequencies using successive differences.
  2. Find half the total frequency and locate the first cumulative frequency that reaches or exceeds it.
    n/2n/2
  3. Read the median-class values and substitute them into the grouped-data median formula.
    Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h
Worked example

Find the median height from these less-than cumulative frequencies: below 140 cm: 4; below 145 cm: 11; below 150 cm: 29; below 155 cm: 40; below 160 cm: 46; below 165 cm: 51.

  1. Find the class frequencies by taking successive differences.
    4,11−4=7,29−11=18,40−29=11,46−40=6,51−46=54,\quad 11-4=7,\quad 29-11=18,\quad 40-29=11,\quad 46-40=6,\quad 51-46=5
  2. The first cumulative frequency at least as large as half the total is 29, so the median class is 145–150.
    n=51,n/2=25.5n=51,\qquad n/2=25.5
  3. Identify the median-class values.
    l=145,cf=11,f=18,h=5l=145,\quad cf=11,\quad f=18,\quad h=5
  4. Substitute and evaluate.
    Median=145+(25.5−1118)5≈149.03 cm\text{Median}=145+\left(\frac{25.5-11}{18}\right)5\approx149.03\text{ cm}
Answer: The median height is approximately 149.03149.03 cm. About half the girls are shorter and half are taller than this height.

Finding Unknown Frequencies

Definition

Unknown frequency in a grouped distribution — Find missing class frequencies by combining the total-frequency condition with the grouped-data median formula.

  • Total frequency: The sum of all class frequencies equals nn.
  • Median class: Use its frequency and the cumulative frequency of the preceding classes in the median formula.
Total frequency condition
∑fi=n\sum f_i=n

Use this equation when some class frequencies are unknown.

Solve for missing frequencies

  1. Write cumulative frequencies in terms of the unknown frequencies.
  2. Use the total-frequency condition to form one equation.
    ∑fi=n\sum f_i=n
  3. Use the given median in the grouped-data formula to form another equation, then solve the equations together.
    Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h
Worked example

The frequencies for successive classes 0–100 through 900–1000 are 2,5,x,12,17,20,y,9,7,42,5,x,12,17,20,y,9,7,4. If the total frequency is 100 and the median is 525, find xx and yy.

  1. Add the known frequencies and use the total frequency of 100.
    76+x+y=100⇒x+y=2476+x+y=100\quad\Rightarrow\quad x+y=24
  2. The median 525 lies in the class 500–600; identify the median-class values.
    l=500,f=20,cf=36+x,h=100,n/2=50l=500,\quad f=20,\quad cf=36+x,\quad h=100,\quad n/2=50
  3. Substitute the median and solve for x.
    525=500+(50−(36+x)20)100⇒25=5(14−x)⇒x=9525=500+\left(\frac{50-(36+x)}{20}\right)100\quad\Rightarrow\quad25=5(14-x)\quad\Rightarrow\quad x=9
  4. Use the total-frequency equation to find y.
    9+y=24⇒y=159+y=24\quad\Rightarrow\quad y=15
Answer: x=9x=9 and y=15y=15.

Choosing a Measure of Central Tendency

Definition

Central tendency — Mean, median, and mode each describe a central or typical value, but they are suited to different purposes.

Choosing a measure
MeasureBest suited forKey point or example
MeanSummarising and comparing distributionsMost frequently used; uses all observations and lies between the smallest and largest values, but extremes can distort it.
MedianFinding a typical value when extreme values may occurUseful for typical worker productivity or wages in a country.
ModeFinding the most frequent or popular valueUseful for the most-watched programme, most-demanded item, or most common vehicle colour.

Interpreting the measures

  • Mean: It is often a good representative when class frequencies are fairly similar; extreme values can make it unrepresentative.
  • Median: Prefer it when individual observations are less important and a typical value is needed despite extreme values.
Empirical relationship

The empirical relation among the three measures is commonly written as the median equal to one-third of the mode plus twice the mean.

Median=Mode+2Mean3\text{Median}=\frac{\text{Mode}+2\text{Mean}}{3}

Grouped-Data Formula Recap

Key grouped-data points

  • Continuous classes: Ensure class intervals are continuous before applying grouped-data median or mode formulas, or constructing an ogive.
  • Unequal class sizes: A grouped median can also be calculated for unequal class widths, though that method is not covered here.
  • Ogives: The scales on the two axes do not have to be the same.
  • Class mark: In grouped-mean calculations, each class is represented by its midpoint.
Grouped-data mean
xˉ=∑fixi∑fi,xˉ=a+∑fidi∑fi,xˉ=a+h∑fiui∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i},\qquad \bar{x}=a+\frac{\sum f_i d_i}{\sum f_i},\qquad \bar{x}=a+h\frac{\sum f_i u_i}{\sum f_i}

Here, xix_i is a class mark, aa is an assumed mean, di=xi−ad_i=x_i-a, and ui=di/hu_i=d_i/h for step deviation.

Grouped-data mode
Mode=l+(f1−f02f1−f0−f2)h\text{Mode}=l+\left(\frac{f_1-f_0}{2f_1-f_0-f_2}\right)h

Here, ll is the modal-class lower limit, hh is its width, f1f_1 is its frequency, and f0f_0 and f2f_2 are the frequencies of the preceding and succeeding classes.

Grouped-data median
Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h

Here, ll is the median-class lower limit, cfcf is the cumulative frequency before it, ff is its frequency, and hh is its class width.

Practice

Find the median for the continuous classes 0–10, 10–20, 20–30, and 30–40 with frequencies 3, 5, 8, and 4.

Hint: Find n/2n/2 and identify the first cumulative frequency that reaches it.
Key step: n=20n=20, the median class is 20–30, and its preceding cumulative frequency is 8.
Solution: Median=20+(10−88)10=22.5\text{Median}=20+\left(\frac{10-8}{8}\right)10=22.5.
Practice

A less-than table has cumulative frequencies below 10: 4, below 20: 13, below 30: 25, and below 40: 34. Find the median.

Hint: Convert the cumulative frequencies to class frequencies for the intervals below 10, 10–20, 20–30, and 30–40.
Key step: The class frequencies are 4, 9, 12, and 9; hence n=34n=34, n/2=17n/2=17, and the median class is 20–30.
Solution: l=20l=20, cf=13cf=13, f=12f=12, and h=10h=10, so Median=20+(17−1312)10≈23.33\text{Median}=20+\left(\frac{17-13}{12}\right)10\approx23.33.

Quick recap

  • Convert less-than cumulative frequencies into class frequencies by taking successive differences.
  • Locate the median class using the first cumulative frequency at least as large as n/2n/2.
  • Use Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h for continuous grouped data.
  • Find unknown frequencies by combining the total-frequency equation with the median formula.
  • The mean is frequently used, uses all observations, and lies between the extremes, but extreme values can distort it.
  • Use the median for typical values when extremes matter; use the mode to identify the most frequent value.
  • Ensure class intervals are continuous before applying grouped median or mode formulas.

Formula sheet

Mean of a frequency distribution
xˉ=∑i=1nfixi∑i=1nfi\bar{x}=\frac{\sum_{i=1}^{n} f_i x_i}{\sum_{i=1}^{n} f_i}
Class mark
xi=L+U2x_i=\frac{L+U}{2}
Direct method for grouped mean
xˉ=∑fixi∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i}
Mode of grouped data
Mode=l+f1−f02f1−f0−f2×h\text{Mode}=l+\frac{f_1-f_0}{2f_1-f_0-f_2}\times h
Median of Ungrouped Data
Median={x(n+1)/2,n odd,xn/2+xn/2+12,n even\text{Median}=\begin{cases}x_{(n+1)/2},&n\text{ odd},\\[2pt]\dfrac{x_{n/2}+x_{n/2+1}}{2},&n\text{ even}\end{cases}
Median of Grouped Data
Median=l+(n2−cff)h\text{Median}=l+\left(\frac{\frac{n}{2}-cf}{f}\right)h
Grouped-data median
Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h
Total frequency condition
∑fi=n\sum f_i=n
Grouped-data mean
xˉ=∑fixi∑fi,xˉ=a+∑fidi∑fi,xˉ=a+h∑fiui∑fi\bar{x}=\frac{\sum f_i x_i}{\sum f_i},\qquad \bar{x}=a+\frac{\sum f_i d_i}{\sum f_i},\qquad \bar{x}=a+h\frac{\sum f_i u_i}{\sum f_i}
Grouped-data mode
Mode=l+(f1−f02f1−f0−f2)h\text{Mode}=l+\left(\frac{f_1-f_0}{2f_1-f_0-f_2}\right)h
Grouped-data median
Median=l+(n/2−cff)h\text{Median}=l+\left(\frac{n/2-cf}{f}\right)h

Mathematics — ALL CHAPTERS

1

Real Numbers

View

2

Polynomials

View

3

Pair Of Linear Equations In Two Variables

View

4

Quadratic Equations

View

5

Arithmetic Progressions

View

6

Triangles

View

7

Coordinate Geometry

View

8

Introduction To Trigonometry

View

9

Some Applications Of Trigonometry

View

10

Circles

View

11

Areas Related To Circles

View

12

Surface areas And Volumes

View

13

Statistics 

View

14

Probability

View
Statistics Notes – Class 10 Mathematics | Prepzy